my66s55 Posted March 19, 2020 Share Posted March 19, 2020 I'm in the final stages of finishing this project. It took 144 separate cad files and 73 files to print. There are 9 small cad files to create and 1 file to yet finish. To create this project, I first had to create it in a complete cad form. Each 3d printable parts in there own file. This is the current composite. I will provide pic's of printed parts as they become available. Don't hesitate to ask questions, comment or suggest. Quote Link to comment Share on other sites More sharing options...
misterNNL Posted March 19, 2020 Share Posted March 19, 2020 Where did you obtain your dimensional data to create your files? Unusual but very interesting subject matter. Quote Link to comment Share on other sites More sharing options...
Richard Bartrop Posted March 19, 2020 Share Posted March 19, 2020 Nice detail on the chassis, but those proportions are bugging me. Quote Link to comment Share on other sites More sharing options...
my66s55 Posted March 19, 2020 Author Share Posted March 19, 2020 44 minutes ago, misterNNL said: Where did you obtain your dimensional data to create your files? Unusual but very interesting subject matter. The service manuals are available and free. Quote Link to comment Share on other sites More sharing options...
my66s55 Posted March 19, 2020 Author Share Posted March 19, 2020 24 minutes ago, Richard Bartrop said: Nice detail on the chassis, but those proportions are bugging me. What are your thoughts, Richard. Quote Link to comment Share on other sites More sharing options...
Richard Bartrop Posted March 19, 2020 Share Posted March 19, 2020 12 minutes ago, my66s55 said: What are your thoughts, Richard. Off the top of my head, the wheels are too small compared to the size of the tires, the body is too high, the windshield too low, and the cross section of that rear fender is too square. There needs to be more of a slope to the grille opening, and the top of that grille opening should be rounder, as should be the whole cross section of that hood and cowl. The beltline also has a slight curve to it, and there's also an extra character line. Actually, here are a couple of photos of a 1935 LaSalle convertible so you can see for yourself what needs to be tweaked. Quote Link to comment Share on other sites More sharing options...
misterNNL Posted March 19, 2020 Share Posted March 19, 2020 48 minutes ago, my66s55 said: The service manuals are available and free. A wonderful source of information to be sure 49 minutes ago, my66s55 said: The service manuals are available and free. That's a wonderful source of information to be sure. Please keep us posted on your progress by posting the results. Quote Link to comment Share on other sites More sharing options...
my66s55 Posted March 19, 2020 Author Share Posted March 19, 2020 When you work from pictures, you have to collect hundreds of examples. Such was the problem with the poster who created a Delehaye f&f 135. The biggest flaw with photos is the tunnel effect. The only part of the picture that is most accurate is the very closest. The rest suffer from the tunnel effect. That's why you need as many pics as you can find to try to get a more accurate example. You may be correct about the windshield though. Thanks Richard, I value your opinion very much. Quote Link to comment Share on other sites More sharing options...
peteski Posted March 19, 2020 Share Posted March 19, 2020 (edited) Wheel and tire dimensions should be readily available to make sure they are correct on the model. The 3D drawing is amazing! Do you have an idea how many hours you put into this project so far? Edited March 19, 2020 by peteski Quote Link to comment Share on other sites More sharing options...
Richard Bartrop Posted March 19, 2020 Share Posted March 19, 2020 23 minutes ago, my66s55 said: When you work from pictures, you have to collect hundreds of examples. Such was the problem with the poster who created a Delehaye f&f 135. The biggest flaw with photos is the tunnel effect. The only part of the picture that is most accurate is the very closest. The rest suffer from the tunnel effect. That's why you need as many pics as you can find to try to get a more accurate example. You may be correct about the windshield though. Thanks Richard, I value your opinion very much. Been there, done that, and totally agree. There are hundreds of LaSalle photos out there. I just picked two that were the most representative of what I was trying to say. Quote Link to comment Share on other sites More sharing options...
my66s55 Posted March 19, 2020 Author Share Posted March 19, 2020 I have scaled the wheels and tires to size I have for Firestones of the period found. I started this project 2014 and there is a post of such. I'm not a cad designer, so my work is slow and tedious. Quote Link to comment Share on other sites More sharing options...
my66s55 Posted March 19, 2020 Author Share Posted March 19, 2020 Much appreciated. Richard. {lease feel free to chime in any time. Quote Link to comment Share on other sites More sharing options...
peteski Posted March 19, 2020 Share Posted March 19, 2020 (edited) 10 minutes ago, my66s55 said: I have scaled the wheels and tires to size I have for Firestones of the period found. I started this project 2014 and there is a post of such. I'm not a cad designer, so my work is slow and tedious. I wonder if you used the tire's bead diameter for the rim size? Rims are about 1.5" larger than the bead size. So a 15" tire will have rim that has a visible diameter of 16.5". That makes a visible difference. Edited March 19, 2020 by peteski Quote Link to comment Share on other sites More sharing options...
Spex84 Posted March 19, 2020 Share Posted March 19, 2020 Mucho respect for what you're doing here. Not easy by any means!! Pete--thanks for the comment on actual rim diameter (above). I know I've made that mistake in 3D modeling when matching my wheels to 15" templates! Quote Link to comment Share on other sites More sharing options...
my66s55 Posted March 20, 2020 Author Share Posted March 20, 2020 4 hours ago, peteski said: I wonder if you used the tire's bead diameter for the rim size? Rims are about 1.5" larger than the bead size. So a 15" tire will have rim that has a visible diameter of 16.5". That makes a visible difference. Thanks. I'll check it out and make adjustments. The wheels are listed as 16". Quote Link to comment Share on other sites More sharing options...
peteski Posted March 20, 2020 Share Posted March 20, 2020 8 minutes ago, my66s55 said: Thanks. I'll check it out and make adjustments. The wheels are listed as 16". So the actual visible rim diameter would be 17.5". Quote Link to comment Share on other sites More sharing options...
my66s55 Posted March 20, 2020 Author Share Posted March 20, 2020 17 minutes ago, peteski said: So the actual visible rim diameter would be 17.5". Thanks. Quote Link to comment Share on other sites More sharing options...
my66s55 Posted March 21, 2020 Author Share Posted March 21, 2020 I printed out 2 test print of the front clip and body to check for errors and fit for both pieces. Everything looks good. Quote Link to comment Share on other sites More sharing options...
skipstitch Posted March 22, 2020 Share Posted March 22, 2020 Cool Project! Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted March 22, 2020 Share Posted March 22, 2020 Ooh man, that's cool. Much respect for what you have accomplished already. I'd be happy with just the test subjects. BTW- what are your plans for them? Later- Quote Link to comment Share on other sites More sharing options...
peteski Posted March 23, 2020 Share Posted March 23, 2020 Nice! What printer was it printed on? Quote Link to comment Share on other sites More sharing options...
Eric Macleod Posted March 23, 2020 Share Posted March 23, 2020 I am very impressed. Your commitment to seeing the project through is incredible. As an FYI, the yellow car posted above belongs (or used to belong) to Bob Lutz, former president of both Chrysler and later GM. I have seen the car in the flesh and is truly fantastic. I look forward to updates on this one. Quote Link to comment Share on other sites More sharing options...
Eric Macleod Posted March 23, 2020 Share Posted March 23, 2020 Whoops...my error. Bob's car is a 34. Oddly the top photo was taken at the Gilmore Car Museum with the Lincoln building in the background! Both shots were taken 20 miles from my house at the Gilmore. Quote Link to comment Share on other sites More sharing options...
henry57 Posted March 23, 2020 Share Posted March 23, 2020 Do you offer 3d models for download? Quote Link to comment Share on other sites More sharing options...
my66s55 Posted March 24, 2020 Author Share Posted March 24, 2020 (edited) On 3/22/2020 at 1:54 AM, Modlbldr said: Ooh man, that's cool. Much respect for what you have accomplished already. I'd be happy with just the test subjects. BTW- what are your plans for them? Later- Throw them away. Edited March 24, 2020 by my66s55 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.