Kit or aftermarket source for 1/25 BB Chevy fender well headers?

[Matt T.]

Does anyone have a lead on kit or aftermarket source for 1/25 396/427 Chevy fenderwell gasser headers? 
Thanks. 

[Snake45]

The AMT '65 Chevy II funny car ones might work for you. 

[Mark]

The MPC flip-front '57 Chevy has a set.  The flip-front '53 Ford pickup kit uses the same chassis and engine, and has the same headers also.

[Misha]

Have a look at the Rat in the 37 Chev kit. The gasser version has over the frame headers exiting in the front wheel well.

Cheers Misha

[Matt T.]

Thank you, all! 

[Plowboy]

2 hours ago, Mark said:

The MPC flip-front '57 Chevy has a set.  The flip-front '53 Ford pickup kit uses the same chassis and engine, and has the same headers also.

The primary pipes on those headers where they join the heads are way too close together for a BBC. 

The AMT '57 Corvette Street Machine has a set of fenderwell headers that may work. Hard to tell not knowing what you're building.

[Matt T.]

32 minutes ago, Plowboy said:

The primary pipes on those headers where they join the heads are way too close together for a BBC. 

The AMT '57 Corvette Street Machine has a set of fenderwell headers that may work. Hard to tell not knowing what you're building.

I’m brainstorming/planning  a Revell ‘56 Del Ray sedan gasser using a Revell ‘69 Camaro or ‘68 Corvette big block.

[Draggon]

Hey Matt, I don't know this guy and have no opinion on his products or service, but here's a link to resin headers on ebay.

https://www.ebay.com/itm/1-25-Gasser-Headers-Resin-MADE-TO-ORDER/383504033072?hash=item594a9f2530:g:GqkAAOSwkoleFRmP

[Can-Con]

30 minutes ago, Draggon said:

Hey Matt, I don't know this guy and have no opinion on his products or service, but here's a link to resin headers on ebay.

https://www.ebay.com/itm/1-25-Gasser-Headers-Resin-MADE-TO-ORDER/383504033072?hash=item594a9f2530:g:GqkAAOSwkoleFRmP

Those are resin copys of the MPC ones Mark mentions in the first reply.  

[Deuces ll]

Those look nice.....

[Ace-Garageguy]

https://www.ebay.com/itm/1-25-BBC-Gasser-Headers-Resin-MADE-TO-ORDER/383493376685?_trkparms=aid%3D1110001%26algo%3DSPLICE.SIM%26ao%3D1%26asc%3D20131231084308%26meid%3Dc2163f88e6db45a592b8fc3b8c339a98%26pid%3D100010%26rk%3D1%26rkt%3D12%26sd%3D383504033072%26itm%3D383493376685%26pmt%3D0%26noa%3D1%26pg%3D2047675&_trksid=p2047675.c100010.m2109

[Ace-Garageguy]

6 hours ago, Draggon said:

Hey Matt, I don't know this guy and have no opinion on his products or service, but here's a link to resin headers on ebay.

https://www.ebay.com/itm/1-25-Gasser-Headers-Resin-MADE-TO-ORDER/383504033072?hash=item594a9f2530:g:GqkAAOSwkoleFRmP

[Matt T.]

Thanks again, everyone. I. bought a set like those on the engine above in Ace’s post. 
 

I also found these 3D-printed SBC pipes on eBay and bought a set. I have options for my ‘56 build now. 
 

Build on! 
 

 

 

[berr13]

Not to misdirect the thread, but I have a set of the sbc headers, and I'd like to know: what are 3D parts made out of, and what glue and paint should be used?