Daddyfink Posted July 9, 2021 Posted July 9, 2021 We know what is in the box, they could have just sold it in a plain brown box or plastic bag, we would still buy it. They made a crappy box art and we called it out, now the world is going to end! Boo hoo! Given todays technology, they could have done better. And yes, Model King proved we will buy the kits despite the bad box art! I have an original, so I am fine, I will just junk the box and re-use my original. Plus that saves space!
Richard Bartrop Posted July 9, 2021 Posted July 9, 2021 If the only thing people have to gripe about is the box, then I'd say Atlantis has a winner here. 1
Vince Nemanic Posted July 9, 2021 Posted July 9, 2021 The casual builder would never spot errors in the box art. And probably half the production run will go to Mooneyes stores and be marked up to $50.
Dave Van Posted July 9, 2021 Posted July 9, 2021 95% of the model builders in the world will never see all the errors brought up here.........This IS the lunatic fringe.
Richard Bartrop Posted July 9, 2021 Posted July 9, 2021 And if people think they can do better, and there are some very talented artists in this group, maybe they should send a portfolio to Atlantis? 1
Mr. Metallic Posted July 9, 2021 Posted July 9, 2021 Can we move on from the box art debate now? It's just going around in circles. Now, with regards to what is in the box. When Atlantis first started production (within the last couple years) it was stated they were holding off on automotive subjects because they had issues with producing "rubber" tires. Is this true? And if so, was it because they didn't have the (what I'm assuming is) specialized molding equipment for rubber? Or did they not have the tire molds? With the new Green elephant funny car, didn't they have to create new tire molds? The reason I ask all this is, I'd love to have the old Revell drag tires readily available(especially since the old formula Revell used would "eat" the plastic wheels over time). I just wonder what we're going to get for rubber in this box.
Mark Posted July 9, 2021 Posted July 9, 2021 We might see new tires in this kit, as the existing tires that might have been used had Revell reissued this kit are also used in other kits for which Revell has kept the tooling.
Daddyfink Posted July 11, 2021 Posted July 11, 2021 On 7/9/2021 at 8:55 AM, Dave Van said: 95% of the model builders in the world will never see all the errors brought up here.........This IS the lunatic fringe. Hey! I resemble that remark!
Daddyfink Posted July 11, 2021 Posted July 11, 2021 On 7/9/2021 at 12:55 PM, Mr. Metallic said: Can we move on from the box art debate now? It's just going around in circles. Now, with regards to what is in the box. When Atlantis first started production (within the last couple years) it was stated they were holding off on automotive subjects because they had issues with producing "rubber" tires. Is this true? And if so, was it because they didn't have the (what I'm assuming is) specialized molding equipment for rubber? Or did they not have the tire molds? With the new Green elephant funny car, didn't they have to create new tire molds? The reason I ask all this is, I'd love to have the old Revell drag tires readily available(especially since the old formula Revell used would "eat" the plastic wheels over time). I just wonder what we're going to get for rubber in this box. The Revell Pie Crust Slicks I think where last issued in the Ms. Deal funny car, hopefully they use them again! Please, no two piece tires!!
Dave Van Posted July 11, 2021 Posted July 11, 2021 1 hour ago, Daddyfink said: Hey! I resemble that remark! I've been called a member of the 'Fringe' by some of the best!
Jon Cole Posted July 12, 2021 Posted July 12, 2021 Several quality reference photos of the 1:1 Mooneyes here:The Mooneyes Dragster: Cloning Our Heros | DrivingLine 1
Snake45 Posted July 12, 2021 Posted July 12, 2021 If one wanted to build a single-rollbar Dragmaster frame, which bar should be removed, the front or the back?
Mark Posted July 12, 2021 Posted July 12, 2021 I'm pretty sure the front bar is a separate part, so by leaving it off you end up with a more garden variety Dragmaster chassis. The Mooneyes chassis was sold by Revell as a parts pack, if I remember right besides being molded in yellow (vs. red for the Dragmaster chassis pack) it included a small extra parts tree with that extra bar, and some other part. I've got both packs, will check later on when I'm home.
Mark Posted July 12, 2021 Posted July 12, 2021 Just checked...the front loop IS a separate part. For the twenty cents difference ($.69 vs $.49) between the Mooneyes chassis pack and the basic Dragmaster pack, you got an additional parts tree with a seat, an X-member for the bottom of the chassis, a flat panel that went in between the body side panels (body wrapped completely around the frame), and two fuel tank mounts. Plus, a small decal sheet with the necessary markings for the Mooneyes version. The extra twenty cents was money well spent.
stavanzer Posted July 13, 2021 Posted July 13, 2021 Look at the Diff in that detail shot, Jon posted! Wow! To have 8" away from Da Jewels! Those old school drivers were braver than I ever was.......
RancheroSteve Posted July 13, 2021 Posted July 13, 2021 2 hours ago, alexis said: Look at the Diff in that detail shot, Jon posted! Wow! To have 8" away from Da Jewels! Those old school drivers were braver than I ever was....... Not to split hairs, but I think that's a 9". Also, as I posted on another thread about this car, there are differences between the original and the clone. I'm pretty sure the original used a quick change diff, which is what is in the model kit.
stavanzer Posted July 13, 2021 Posted July 13, 2021 I meant 8 inches Away from (or too close to) the Diff. I saw the clone at the March Meets several years ago. Sadly I did not get pics.....
RancheroSteve Posted July 13, 2021 Posted July 13, 2021 29 minutes ago, alexis said: I meant 8 inches Away from (or too close to) the Diff. I saw the clone at the March Meets several years ago. Sadly I did not get pics..... Ahh, I see! I saw it at the March Meet, too. I've got a couple of photos, but they don't show anything extraordinary. I don't think I even realized at the time that it was a re-creation.
Casey Posted July 14, 2021 Author Posted July 14, 2021 Notice the word "clone"-- the car in the link Jon shared (no offense) is not the same as the original. https://www.motortrend.com/news/hrxp-1207-1961-mooneyes-moon-yellow-a-dragster/
Mark Posted July 14, 2021 Posted July 14, 2021 On 7/13/2021 at 9:40 AM, alexis said: Look at the Diff in that detail shot, Jon posted! Wow! To have 8" away from Da Jewels! Those old school drivers were braver than I ever was....... A couple of drivers back then did have, let's just say, "incidents"...
keyser Posted July 14, 2021 Posted July 14, 2021 20 minutes ago, Mark said: A couple of drivers back then did have, let's just say, "incidents"... Makes “quick change” have new meaning.
Casey Posted July 16, 2021 Author Posted July 16, 2021 (edited) On 7/10/2021 at 8:30 PM, Daddyfink said: The Revell Pie Crust Slicks I think where last issued in the Ms. Deal funny car, hopefully they use them again! Please, no two piece tires!! They've been used in both the Tony Nancy Dragsters and '64 T-bolt kits, too, IIRC, but I don't believe Atlantis acquired any tire molds as part of the Revell molds acquisition. Looking at the original Revell instruction sheet, you can see exactly which parts from each parts pack are used, where they are located on the built model, etc.: Edited July 16, 2021 by Casey 2
Casey Posted July 24, 2021 Author Posted July 24, 2021 "The Mooneyes will be available for preorder in about 2 weeks." 1 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now