Beans Posted January 10, 2023 Share Posted January 10, 2023 11 hours ago, 53gmc said: Got some of my ebay purchases in today including these fuel cells. Thinking of leaving out the the passenger seat and mounting the big one in its place like a real cannonball car did a few years ago in a rental mustang I remember reading about that. Looks good. That cooler in the background is pretty cool too. 1 Quote Link to comment Share on other sites More sharing options...
Belugawrx Posted January 10, 2023 Share Posted January 10, 2023 Primer party !!! I used the rear rolled valance and the custom front end, cut the chrome grille and headlights from the chrome front bumper...mudded all into place Removed all side trim and badges 2 Quote Link to comment Share on other sites More sharing options...
53gmc Posted January 10, 2023 Share Posted January 10, 2023 4 hours ago, Beans said: I remember reading about that. Looks good. That cooler in the background is pretty cool too. I wanted to stick the cooler in the car for drinks but i dont think theres gonna be enough room, novas are smaller then i remember apparently lol 2 Quote Link to comment Share on other sites More sharing options...
Mattilacken Posted January 10, 2023 Share Posted January 10, 2023 4 hours ago, 53gmc said: I wanted to stick the cooler in the car for drinks but i dont think theres gonna be enough room, novas are smaller then i remember apparently lol And then you take a truck cab with a huge transmission tunnel and realize ther is no space 🤓glad I could have the auxiliary tanks extended in the “original” C5R place 1 Quote Link to comment Share on other sites More sharing options...
Beans Posted January 11, 2023 Share Posted January 11, 2023 Y'all are moving right along. Already in primer and all I have done is the side markers filled and trim and panel lines made smooth....no engine,. No glass,. 3/4 of an interior, no tires or wheels, and an unmodified chassis. So much to do!! 2 Quote Link to comment Share on other sites More sharing options...
53gmc Posted January 11, 2023 Share Posted January 11, 2023 Got the engine all done and installed. Went with a lighter, high winding small block instead of a thirstier big block. Parts box long tube headers, parts box mystery high rise intake (its sbc for sure just no idea from what kit), parts box carb and valve covers. Wrapped the headers, added wiring, fuel line, and dipsticks. 2 Quote Link to comment Share on other sites More sharing options...
53gmc Posted January 11, 2023 Share Posted January 11, 2023 Got lucky today. I slipped down icy steps bringing in some parts i painted in my garage last night. I found everything but one shock. I figured it was lost in the 2 feet of snow but low and behold i found it today at lunch 2 1 Quote Link to comment Share on other sites More sharing options...
Beans Posted January 11, 2023 Share Posted January 11, 2023 1 hour ago, 53gmc said: Got lucky today. I slipped down icy steps bringing in some parts i painted in my garage last night. I found everything but one shock. I figured it was lost in the 2 feet of snow but low and behold i found it today at lunch Good find!! I never find dropped parts until I have already replaced them. 1 Quote Link to comment Share on other sites More sharing options...
53gmc Posted January 11, 2023 Share Posted January 11, 2023 1 hour ago, Beans said: Good find!! I never find dropped parts until I have already replaced them. Thats usually how it goes for me as well Quote Link to comment Share on other sites More sharing options...
White Rabbit Posted January 12, 2023 Author Share Posted January 12, 2023 It's great to see the diverse group of vehicles that have been entered so far! Our updated entry list: 1. '56 Chevy (426 pack) 2. Chevy Silverado C5R truck (Mattilacken) 3. Chevy Monza 2+2 (MeatMan) 4. '37 Ford Custom Convertible (Jantrix) 5. Delorean DMC-H12 (White Rabbit) 6. Dodge Viper RT/10 (LL3 Model Worx) 7. '70 Plymouth Road Runner (KWT) 8. '61 Ford Falcon (Fat Brian) 9. '68 FRC Chevy Corvette (Whosurdaddy209) 10. '66 Mercury (Sam I Am) 11. '70 1/2 Camaro Z28 or '67 Streaker Vette (JerseeJerry55) 12. Chevy Chevelle (Keef) 13. Dodge L-xxx (vekasiini) 14. Honda Accord (Spottedlaurel) 15. Volkswagen Scirocco (Tim08) 16. Chevy Nova SS (53gmc) 17. '62 Buick Electra (Belugawrx) 18. Pontiac Firebird (Beans) 19. El Camino Camper (shoemake) 20. '53 Ford Victoria (Phildauplo) Quote Link to comment Share on other sites More sharing options...
426 pack Posted January 12, 2023 Share Posted January 12, 2023 Haven’t made much progress on the 56 but I did find a big block, I don’t know what kit it came out of but just for the fun of it I’m calling it a 496 because I like the way it sounds. I was also able to find a t56 that I believe came from a viper and for some reason I decided to try and fit a tunnel ram with 2 Holley dominator type carbs all under the hood i obviously still have a long way to go but now that I have the motor somewhat figured I have a general idea of where I’m going. I am going to be building a BIG fuel cell to feed the big block, I’ve found a Dana 60 out of a dart that I’ll run in the rear probably 4 linked to handle the power and I’ve decided to stick with the sleeper look inside and out with bench seats, steel wheels and either black like my original inspiration photos or weathered/rough like my GTO from 2021 2 Quote Link to comment Share on other sites More sharing options...
53gmc Posted January 12, 2023 Share Posted January 12, 2023 While i wait for my modified fuel cell to dry, i started experimenting with scratch building front and rear spoilers out of brass. Kind of going for an old school trans-am series - pro-touring hybrid 4 Quote Link to comment Share on other sites More sharing options...
Phildaupho Posted January 13, 2023 Share Posted January 13, 2023 (edited) '53 FORD VICTORIA Since I decided to build a Cannonball 2023 entry I have been a little obsessed with making the planned modifications of which I think the most involved have been done. All lower body trim has been removed and areas filled as necessary. The wheelwells have been raised but the stock shape retained. The bumpers were dechromed and guards removed. [Interesting to find that the chrome was plated over black plastic]. In front an air dam with splitter was added below the bumper. Out back a lip spoiler was installed on the trunk. The interior has the custom seats and console from the AMT 57 Ford. The suspension was lowered using parts from the Revell '57 Chev which feature big brakes. The optional wheels and tires from the kit are also used. I will be putting this model on the back burner for awhile to finish the model I was working when when this project came up. Edited January 13, 2023 by Phildaupho 5 Quote Link to comment Share on other sites More sharing options...
Beans Posted January 13, 2023 Share Posted January 13, 2023 And just like that... No more back seats. Figure I will just cover up the previous owners affection for glue. 1 Quote Link to comment Share on other sites More sharing options...
53gmc Posted January 13, 2023 Share Posted January 13, 2023 Got the modified fuel cell all assembled. The fuel neck will be accessed through the quarter glass. The smaller line is the vent, its looped incase of a rollover 2 Quote Link to comment Share on other sites More sharing options...
53gmc Posted January 15, 2023 Share Posted January 15, 2023 Made a ton of progress on the nova. Painted its toyota "cashmere beige metallic", should some what blend in with traffic now haha. Also got the cowl hood and racing seats in today 1 Quote Link to comment Share on other sites More sharing options...
53gmc Posted January 15, 2023 Share Posted January 15, 2023 Debating on running this external oil cooler i built. Thoughts? 1 Quote Link to comment Share on other sites More sharing options...
Mattilacken Posted January 15, 2023 Share Posted January 15, 2023 5 hours ago, 53gmc said: Debating on running this external oil cooler i built. Thoughts? Cool, typical JDM. 🙂 On a nova you probably could fit it behind the grill since there is space. 1 Quote Link to comment Share on other sites More sharing options...
53gmc Posted January 15, 2023 Share Posted January 15, 2023 7 hours ago, Mattilacken said: Cool, typical JDM. 🙂 On a nova you probably could fit it behind the grill since there is space. The way everything fits on the car, im gonna have to put the electric fan on as a puller so im not sure if itll fit too Quote Link to comment Share on other sites More sharing options...
Jhedir6 Posted January 15, 2023 Share Posted January 15, 2023 I'll come out and play... Just ordered this one, so still awaiting delivery but I think this will be a good kit to start with. I've got files for an engine bay and an RB26 engine I can 3D print along with some interior items I can add too, but outside I'll keep it pretty stock looking, cause it's already a wicked looking car without any help, IMO probably one of the best looking cars from the late 90's early 2000's. Since the outside will be stock(ish) to give it a bit more personality I think a custom colour will be in order. I found this shot recently and thought the colour really makes this car pop. So I'll be going with something like this. Not sure if I'll go black or bronze on the wheels, as both will look good. Lots of great progress on some really cool builds already and only 2 weeks into the year. Looking forward to seeing what everyone comes up with this year. 4 Quote Link to comment Share on other sites More sharing options...
White Rabbit Posted January 18, 2023 Author Share Posted January 18, 2023 It's great to see all the progress that is already being made so early in the build! And...our entry list keeps growing! We're already nearly at half the entrants (43) of last year's build; and it's still mid-January! Our updated entry list: 1. '56 Chevy (426 pack) 2. Chevy Silverado C5R truck (Mattilacken) 3. Chevy Monza 2+2 (MeatMan) 4. '37 Ford Custom Convertible (Jantrix) 5. Delorean DMC-H12 (White Rabbit) 6. Dodge Viper RT/10 (LL3 Model Worx) 7. '70 Plymouth Road Runner (KWT) 8. '61 Ford Falcon (Fat Brian) 9. '68 FRC Chevy Corvette (Whosurdaddy209) 10. '66 Mercury (Sam I Am) 11. '70 1/2 Camaro Z28 or '67 Streaker Vette (JerseeJerry55) 12. Chevy Chevelle (Keef) 13. Dodge L-xxx (vekasiini) 14. Honda Accord (Spottedlaurel) 15. Volkswagen Scirocco (Tim08) 16. Chevy Nova SS (53gmc) 17. '62 Buick Electra (Belugawrx) 18. Pontiac Firebird (Beans) 19. El Camino Camper (shoemake) 20. '53 Ford Victoria (Phildauplo) 21. Nissan Skyline NISMO R34 GT-R (Jhedir6) 1 Quote Link to comment Share on other sites More sharing options...
Mattilacken Posted January 19, 2023 Share Posted January 19, 2023 So my Silverado will not be making it this year either and i know that alrady since i want to do a tribute build for the late legend Ken block! But i might enter the Block build here if thats okay with every one, its also in a Instagram buildoff for Ken Block. 2 Quote Link to comment Share on other sites More sharing options...
Whosurdaddy209 Posted January 19, 2023 Share Posted January 19, 2023 I got started on the FRC corvette, I started out by glueing the hard top in place and the removing the excess hatch from the inside. I also added the rear quarter flares to help with the wide tires. Then I used filler and resin to seal up the part lines for the roof and hatch, along with the vents on the deck. 4 Quote Link to comment Share on other sites More sharing options...
Beans Posted January 20, 2023 Share Posted January 20, 2023 Ladies and gentlemen, we have an engine!! Now to make it fit. 3 Quote Link to comment Share on other sites More sharing options...
53gmc Posted January 20, 2023 Share Posted January 20, 2023 7 hours ago, Beans said: Ladies and gentlemen, we have an engine!! Now to make it fit. Thats pretty wild looking, what kind of motor is it? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.