customline Posted March 29 Share Posted March 29 (edited) I don't get it, Greg. That just looks like a pretty normal paint job to me 🤓 Edited March 29 by customline Added a word for maximum effect. Quote Link to comment Share on other sites More sharing options...
Stanward VonDiederichs Posted March 29 Share Posted March 29 On 3/26/2024 at 4:28 PM, NOBLNG said: I gave it a coat of Mr.Hobby semi gloss clear. I came out glossier than I was aiming for…but the more I look at it the more I don’t mind it.🤔 What kind of wire did you use to hold the car when you painted it was it that I've been trying to find something better than what I've been using to spray my stuff I like that. Quote Link to comment Share on other sites More sharing options...
David G. Posted March 29 Share Posted March 29 Wow Greg, I thought you might be exaggerating about the crud in the paint but you obviously weren't! 😮 That looks like it was painted on the floor of a saw mill with a dirty pinecone! Hopefully you won't have to re-do any of the fine work you did to get the front clip in such great shape. David G. 1 Quote Link to comment Share on other sites More sharing options...
customline Posted March 29 Share Posted March 29 Dirty pinecone? Did I read that right? 😯 Quote Link to comment Share on other sites More sharing options...
David G. Posted March 29 Share Posted March 29 9 minutes ago, customline said: Dirty pinecone? Did I read that right? 😯 Yeah, you did! Quote Link to comment Share on other sites More sharing options...
Steve H Posted March 29 Share Posted March 29 If I were you I would still blame AMT, they are at least indirectly responsible….😀 We all know you will have it whipped back into shape and, if I know you, there will be yet another improvement of some kind as well. Frustrating though for sure… Quote Link to comment Share on other sites More sharing options...
customline Posted March 29 Share Posted March 29 (edited) 3 hours ago, David G. said: Yeah, you did! I cannot see, in my mind's eye, any scenario in which a pine cone - clean, dirty, or otherwise - could apply paint with any degree of.....anything 🤯! but it was funny 😄 OK, let's not do this again.....sorry Greg....🤓 Edited March 29 by customline 1 Quote Link to comment Share on other sites More sharing options...
W-409 Posted March 29 Share Posted March 29 This is a very cool project, having just built the same kit myself it's nice to see one built with this much thought and attention to certain things that many modelers would just simply ignore. Maybe I missed it, but did you figure out somekind of a fix for the windshield fitment? I only found out on mine after the body was painted and chrome trim done with BMF that especially the fitment of the windshield was pretty bad, but there was nothing I could do about it at that point. Quote Link to comment Share on other sites More sharing options...
NOBLNG Posted March 29 Author Share Posted March 29 1 hour ago, W-409 said: This is a very cool project, having just built the same kit myself it's nice to see one built with this much thought and attention to certain things that many modelers would just simply ignore. Maybe I missed it, but did you figure out somekind of a fix for the windshield fitment? I only found out on mine after the body was painted and chrome trim done with BMF that especially the fitment of the windshield was pretty bad, but there was nothing I could do about it at that point. Other than replacing the center divider with a piece of bobby pin, I haven’t done anything about the glass. I think I should take another look at it though before painting it again. Quote Link to comment Share on other sites More sharing options...
customline Posted March 29 Share Posted March 29 Don't use the pine cone this time, Greg. 😕 1 Quote Link to comment Share on other sites More sharing options...
LennyB Posted March 30 Share Posted March 30 I think I'm going to order some pine-cone repellent before I attempt to paint mine just to be safe. 😮 Greg, with this kit I think it's just par for the course. I'm sure the second attempt will succeed and it will be an easy ride the rest of the way....Hey, one can dream can't they.😌 Quote Link to comment Share on other sites More sharing options...
David G. Posted March 31 Share Posted March 31 On 3/29/2024 at 4:47 PM, customline said: Don't use the pine cone this time, Greg. 😕 18 hours ago, LennyB said: I think I'm going to order some pine-cone repellent before I attempt to paint mine just to be safe. 😮 Greg, with this kit I think it's just par for the course. I'm sure the second attempt will succeed and it will be an easy ride the rest of the way....Hey, one can dream can't they.😌 All pinecones aside, it certainly can be a bummer to have a paintjob go badly Len. But I've had the second attempt often go exceedingly well. So well in fact, that I'm often glad that I goofed up on the first one. It's like there was a "bad one" in the system that needed to be pushed out of the way so the good one could come out. "Dirty Pinecone" It would also be a great name for a biker bar on the outskirts of Eugene Oregon. Seriously Len, I hope the paintjob goes well for you. David G. Quote Link to comment Share on other sites More sharing options...
LennyB Posted April 1 Share Posted April 1 On 3/31/2024 at 8:41 AM, David G. said: All pinecones aside, it certainly can be a bummer to have a paintjob go badly Len. But I've had the second attempt often go exceedingly well. So well in fact, that I'm often glad that I goofed up on the first one. It's like there was a "bad one" in the system that needed to be pushed out of the way so the good one could come out. "Dirty Pinecone" It would also be a great name for a biker bar on the outskirts of Eugene Oregon. Seriously Len, I hope the paintjob goes well for you. David G. Thanks David, I'll keep my fingers crossed and pinecones outside. On second thought maybe I should paint "Dirty Pinecone Ranch" on the side of my Woody. 😄 Quote Link to comment Share on other sites More sharing options...
NOBLNG Posted April 2 Author Share Posted April 2 (edited) The left headlight bezel was a little out of level so I pryed it off. I added a fair bit of Milliput to correct my previous attempt, and it was easier to shape with the bezel off anyway. And I think I have it shaped satisfactorily now.🥵 I took another look at the glass and decided to split it up and just use the windshield and rear window. The side glass I will cut from clear sheet. I also added a bit of putty to fill the gaps at the A pillars. This is the first time using the Duplicolor sandable primer and it sure seemed to go on dry and grainy. I hope I can get this smoothed out or it’s back in the pond.🤨 Edited April 2 by NOBLNG 2 Quote Link to comment Share on other sites More sharing options...
customline Posted April 2 Share Posted April 2 I admire your persistence, sir. The kit does not warrant it. The subject, on the other hand, does and that's why all this stuff needed to be done. We all know by now the kit leaves a whole lot to be desired and your work on this kit will be the template for future builds. Not every builder will want to do all of this, but, for me, (and you, if I may assume) this is where the fun is. 2 Quote Link to comment Share on other sites More sharing options...
David G. Posted April 2 Share Posted April 2 Good call on splitting the glass canopy Greg. I seem to remember some fit issues with that from my experience with this kit. The body work looks much better too! David G. Quote Link to comment Share on other sites More sharing options...
dino246gt Posted April 2 Share Posted April 2 10 hours ago, customline said: I admire your persistence, sir. The kit does not warrant it. The subject, on the other hand, does and that's why all this stuff needed to be done. We all know by now the kit leaves a whole lot to be desired and your work on this kit will be the template for future builds. Not every builder will want to do all of this, but, for me, (and you, if I may assume) this is where the fun is. Fantastic work on this and it IS where the fun is, it looks SO much better, I wish AMT would've done all this. Great job Greg! 1 Quote Link to comment Share on other sites More sharing options...
Stanward VonDiederichs Posted April 13 Share Posted April 13 Hey Greg How did it turn out? I thought you said it worked out great these last photos if that's primer it didn't look that bad not like that red oxide. Have you done any more? On 4/1/2024 at 6:34 PM, NOBLNG said: The left headlight bezel was a little out of level so I pryed it off. I added a fair bit of Milliput to correct my previous attempt, and it was easier to shape with the bezel off anyway. And I think I have it shaped satisfactorily now.🥵 I took another look at the glass and decided to split it up and just use the windshield and rear window. The side glass I will cut from clear sheet. I also added a bit of putty to fill the gaps at the A pillars. This is the first time using the Duplicolor sandable primer and it sure seemed to go on dry and grainy. I hope I can get this smoothed out or it’s back in the pond.🤨 Quote Link to comment Share on other sites More sharing options...
NOBLNG Posted May 1 Author Share Posted May 1 (edited) Well I have been fiddling with this one off and on. I think I’ve filled, filed, shaped and sanded it into an acceptable level of submission. I filled the existing cowl outline and made a new vent lid from .015” styrene. I glued it in place, then scribed around the edges with a needle, then sanded it almost flush to the cowl. The windshield molding is four separate pieces since I couldn’t even get two bends spaced exactly the correct distance apart.🥵 I don’t know what I will do about wipers yet…probably scratch build a couple?🤔 Now hopefully I can get a paint job on it without having to dunk it again 🥴 Thanks for the support and encouragement everyone!🙂 Edited May 7 by NOBLNG 1 Quote Link to comment Share on other sites More sharing options...
customline Posted May 2 Share Posted May 2 (edited) 1 hour ago, NOBLNG said: Well I have been fiddling with this one off and on. I think I’ve filled, filed, shaped and sanded it into an acceptable level of submission. I made a new cowl vent from .015” styrene, then scribed around the edges with a needle, then sanded it almost flush to the cowl. The windshield molding is four separate pieces since I couldn’t even get two bends spaced exactly the correct distance apart.🥵 I don’t know what I will do about wipers yet…probably scratch build a couple?🤔 Now hopefully I can get a paint job on it without having to dunk it again 🥴 Thanks for the support and encouragement everyone!🙂 Good God, man....I am so done with my '41 and I know what you are going through. I see mine sitting there every day and I just avoid thinking about it. It's just one of those things. I have moved on. Greg, I hope you can bring yours to some sort of closure. Good luck. Edit: I really like that painting fixture you made. Great idea! Edited May 2 by customline Quote Link to comment Share on other sites More sharing options...
customline Posted May 2 Share Posted May 2 Oh, and yeah....it does look great, Greg. The thing you did with the cowl vent is genius. Well done. The windshield rubber is a great idea too. Can't wait to see this one done. You could use MCG or Detail Master wipers if your dexterity is still up to par (mine isn't so great these days 🥴). Quote Link to comment Share on other sites More sharing options...
David G. Posted May 2 Share Posted May 2 That old Plymouth looks fabulous in primer Greg! You've given this kit way more that it's due and the results really show. David G. Quote Link to comment Share on other sites More sharing options...
LennyB Posted May 2 Share Posted May 2 Greg, glad to see you are making progress. I have my two in primer but not making much progress on getting any paint on them. The cowl vent option looks great and if you need some wipers I have some extra photo-etched ones as that's what I'm using on mine. Quote Link to comment Share on other sites More sharing options...
NOBLNG Posted May 2 Author Share Posted May 2 19 hours ago, customline said: Oh, and yeah....it does look great, Greg. The thing you did with the cowl vent is genius. Well done. The windshield rubber is a great idea too. Can't wait to see this one done. You could use MCG or Detail Master wipers if your dexterity is still up to par (mine isn't so great these days 🥴). Thanks Jim.🙂 8 hours ago, David G. said: That old Plymouth looks fabulous in primer Greg! You've given this kit way more that it's due and the results really show. David G. Thanks David.🙂 7 hours ago, LennyB said: Greg, glad to see you are making progress. I have my two in primer but not making much progress on getting any paint on them. The cowl vent option looks great and if you need some wipers I have some extra photo-etched ones as that's what I'm using on mine. Thanks for the offer Len. If I can’t scratch build something decent, I will either order some, since I would like to have some on hand…or just leave them off (fair weather only cruiser😎). BTW, what brand do you have? Quote Link to comment Share on other sites More sharing options...
NOBLNG Posted May 2 Author Share Posted May 2 (edited) Some pics with the first few coats of pearl red. I need to give a couple spots a light sanding then a final coat or two (I hope😬). Edited May 2 by NOBLNG 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.