Dragonhawk1066 Posted Friday at 08:24 PM Posted Friday at 08:24 PM (edited) Here's my version of the Revell 1981 Camaro Z28 with some modifications. I painted it in Createx Opaque White and it was cleared with Createx 4053 High Gloss, then wet-sanded, polished, and waxed. I masked off and painted the trim and light openings with Createx opaque black. I ordered the 20 and 21-inch 80's style Camaro wheels from Jay's Resin Wheels on Ebay. Those were painted with Ammo by Mig Aluminum and Tamiya X-31 Titanium Gold, and I added copper wire painted black for valve stems. I did have to drill holes to re-locate the front wheels for the lower profile look, but the rear wheel location was un-modified. I cut out the molded in engine and transmission plate and exhaust and used the engine/transmission and exhaust from the Revell 1969 Camaro Z28 RS. It fit perfectly with no alterations needed. I did add an intake manifold and carburetor from a NASCAR kit with a machined aluminum air cleaner from Off The Sprue. I added spark plug wires, an aftermarket Accel coil, and heater hoses to help with the engine compartment detail. The interior was painted in a custom mixed color using craft paints with embossing powder for carpet, a sewing pin for the shifter ball, and copper wire painted black for door locks. The stripe decals were very nice and applied without an issue. I did need some setting solution and made a couple of cuts on the taillight decals. This is a bit of a mis-leading kit from Revell as it is a Snap-Together kit that should have been labeled as such. That being said, while lacking in details, it is not a bad kit as far as snap kits are concerned. The parts fit was pretty good and, again, the decals are pretty nice. It was very easy to remove the parts that I did and it seems that you can replace them with pretty much any engine/trans/exhaust combo with minimal effort. This turned out to be a pretty fun build, and I recently acquired another to do in a different color. As always, thanks for looking! Edited Friday at 09:02 PM by Dragonhawk1066 17
SpikeSchumacher Posted Friday at 08:44 PM Posted Friday at 08:44 PM Very nice, Craig! What did you use to tint the T-top panels?
karbuildr Posted Friday at 09:46 PM Posted Friday at 09:46 PM That is one sweet ride. Super build, excellent details all around.
TransAmMike Posted Saturday at 12:56 AM Posted Saturday at 12:56 AM Good looking Camaro Craig, great job! 👍
slusher Posted Saturday at 05:45 AM Posted Saturday at 05:45 AM Beautiful Camaro, Craig great detail…
Dragonhawk1066 Posted Saturday at 10:28 PM Author Posted Saturday at 10:28 PM On 6/27/2025 at 4:44 PM, SpikeSchumacher said: Very nice, Craig! What did you use to tint the T-top panels? Thanks! I some X-19 Tamiya Smoke and sprayed about 5 coats to the inside of the T-tops. 1
Dragonhawk1066 Posted Saturday at 10:29 PM Author Posted Saturday at 10:29 PM On 6/27/2025 at 5:46 PM, karbuildr said: That is one sweet ride. Super build, excellent details all around. On 6/27/2025 at 5:47 PM, Dragline said: Tight! Super nice bro.. 21 hours ago, TransAmMike said: Good looking Camaro Craig, great job! 👍 16 hours ago, slusher said: Beautiful Camaro, Craig great detail… 16 hours ago, michelle said: awesome job Thanks everyone!
Jim B Posted Saturday at 11:21 PM Posted Saturday at 11:21 PM Great looking Camaro. Looks like it could have come right off of my High School's parking lot. Well done.
XYHARRY Posted Sunday at 06:47 AM Posted Sunday at 06:47 AM Excellent colour scheme and detail, well done Craig.
espo Posted Sunday at 04:03 PM Posted Sunday at 04:03 PM Beautiful looking paint finish and color combination with the stripes and interior. Like the wheels and the way you painted them.
carrucha Posted Sunday at 09:35 PM Posted Sunday at 09:35 PM Cool Camaro. I really dig the color combo and wheels. The decals really look good with the body color.
STU111 Posted yesterday at 04:06 AM Posted yesterday at 04:06 AM That is one sharp looking Camaro there! I really love the shape of the Gen 2 body. Beautifully done. Top stuff. 👍🏻
Dragonhawk1066 Posted 21 hours ago Author Posted 21 hours ago On 6/28/2025 at 7:21 PM, Jim B said: Great looking Camaro. Looks like it could have come right off of my High School's parking lot. Well done. On 6/28/2025 at 7:26 PM, meechum68 said: Fantastic work! On 6/28/2025 at 10:40 PM, bondo bill said: sharp build On 6/29/2025 at 2:47 AM, XYHARRY said: Excellent colour scheme and detail, well done Craig. On 6/29/2025 at 12:03 PM, espo said: Beautiful looking paint finish and color combination with the stripes and interior. Like the wheels and the way you painted them. On 6/29/2025 at 5:35 PM, carrucha said: Cool Camaro. I really dig the color combo and wheels. The decals really look good with the body color. 18 hours ago, STU111 said: That is one sharp looking Camaro there! I really love the shape of the Gen 2 body. Beautifully done. Top stuff. 👍🏻 Thanks guys!
Geno Posted 20 hours ago Posted 20 hours ago That is one kickass build. I always liked these as the front reminds me a lot of the '76 Trans Am.😎🤑
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now