Tubs

[WayfromSmoke]

Idk if anyone can use this or not and Ive still got trimming and cleanup to do but I used a rattle can lids and cut the little inside part out and in half 

[Swamp Dog]

keep us updated. i would like to see how it turns out. 

[Ace-Garageguy]

Lotta people use pill bottles.

If they're styrene bottles, they glue much better than most rattlecan tops will.

[WayfromSmoke]

48 minutes ago, Ace-Garageguy said:

Lotta people use pill bottles.

If they're styrene bottles, they glue much better than most rattlecan tops will.

Noted thanks for the info… is there a specific glue to use in this application or is it just a pain in the butt either way?

Edited 21 hours ago by WayfromSmoke

[WayfromSmoke]

1 hour ago, Swamp Dog said:

keep us updated. i would like to see how it turns out. 

Will do!

[peteski]

The plastic can caps are made of doesn't take glue well, but in my experience neither do pill bottles, which are made from Polypropylene, not Polystyrene. At leas all the amber color pill bottles I deal with.  Their recycling symbol is #5 PP.

[Ace-Garageguy]

6 hours ago, peteski said:

The plastic can caps are made of doesn't take glue well, but in my experience neither do pill bottles, which are made from Polypropylene, not Polystyrene. At leas all the amber color pill bottles I deal with.  Their recycling symbol is #5 PP.

My most recent amber prescription bottles (2020) are marked PETE, polyethylene terephthalate, recycling #1, which will bond kinda OK with CA or epoxy if roughened, but much post-bonding handling is asking for failure.

CA adhesion to PETE and other "low surface energy plastics" is enhanced by using Permabond POP primer or similar "adhesion promoters", and of course there are bonding materials designed specifically for this purpose, but the average modeler isn't going to buy expensive 2-component industrial adhesives.

PETE and PETG are frequently used for replacement clear model car parts like windows, and are often held in place with PVA (the white glue family). But the bond isn't very strong, so fit needs to be precise and post-gluing handling should be minimal.

Also please note: I specifically said: "If they're styrene bottles, they glue much better than most rattlecan tops will".

I have had older bottles made of styrene, which is why I mentioned them.

Edited 10 hours ago by Ace-Garageguy
punctiliousness

[peteski]

4 hours ago, Ace-Garageguy said:

. . . much older bottles made of styrene, which is why I mentioned them, but sometimes it seems almost everything I say has to devolve into an argument.

Why do you think I'm arguing? I wasn't even making a counter point.

I simply conveyed my experience as we usually do in online forums.  Isn't that what the forums are for? To share modeling experience. All the amber bottles I have in my possession, some still with the current medication in them, and ones I collected over the last 20 years are made from Polypropylene.  I also know that (as you also mentioned) most glues used by average modelers do not bond Polypropylene or PETE well.  Using those materials for tubs usually means that they will likely be exposed to a bit more structural stress than a windshield.

That's all I did - no  need to get your feathers ruffled.

[Ace-Garageguy]

6 hours ago, peteski said:

The plastic can caps are made of doesn't take glue well, but in my experience neither do pill bottles, which are made from Polypropylene, not Polystyrene. At leas all the amber color pill bottles I deal with.  Their recycling symbol is #5 PP.

 

17 minutes ago, peteski said:

Why do you think I'm arguing? I wasn't even making a counter point.

Call it whatever you want.

I said IF they're styrene pill bottles etc. etc. etc.

You said pill bottles are not styrene.

Edited 10 hours ago by Ace-Garageguy
punctiliousness

[peteski]

8 minutes ago, Ace-Garageguy said:

 

Call it whatever you want.

I said IF styrene pill bottles etc. etc. etc.

You said pill bottles are not styrene.

Looks like we were talking about apples and oranges.  You mentioning Polystyrene bottles should not exclude me being able to mention Polypropylene bottles. My response did  not dispute your pill bottle experience - just added my experience.

But I apologize for adding my modeling experiences to this thread.  

Edited 10 hours ago by peteski

[NOBLNG]

The ones I have are #5 plastic and Tamiya thin cement has zero effect on it.

[Ace-Garageguy]

4 minutes ago, peteski said:

Looks like we were talking about apples and oranges.  You mentioned Polystyrene bottles  should not exclude me mentioning Polypropylene bottles. My response did  not dispute your pill experience - just added my experience.

But I apologize for adding my modeling experiences to this thread.  

Oh please. Call me out when I'm wrong. Fine. I don't want to post misinformation.

But half the time you call me out because you didn't fully read what I wrote, and it gets old.

[Ace-Garageguy]

19 minutes ago, NOBLNG said:

The ones I have are #5 plastic and Tamiya thin cement has zero effect on it.

And just so there's no more confusion, nobody said solvent cements work on all pill bottles...ONLY THE STYRENE ONES.

YOU may not have any, but they do in fact exist.

https://www.sks-bottle.com/pharmaceutical-packaging/clear-plastic-pill-vials.html?

https://www.calpaclab.com/snap-cap-vials-polystyrene-7-dram-dynalon/dl-426364-07

Edited 10 hours ago by Ace-Garageguy

[peteski]

Bill, this is getting silly. Please reread my original post. Where exactly have I contradicted your statement, or called it wrong? I simply mentioned that all the pill bottles I have dealt with were #5 plastic. Why are you insisting I'm arguing with you? I'm done!

[Ace-Garageguy]

2 minutes ago, peteski said:

Bill, this is getting silly. Please reread my original post. Where exactly have I contradicted your statement, or called it wrong? I simply mentioned that all the pill bottles I have dealt with were #5 plastic. Why are you insisting I'm arguing with you? I'm done!

Whatever.

[NOBLNG]

14 hours ago, Ace-Garageguy said:

CA adhesion to PETE and other "low surface energy plastics" is enhanced by using Permabond POP primer or similar ….

It all started when you called Peter a low energy plastic.🤣🤣🤣🙄

Edited 1 hour ago by NOBLNG

[Zen]

Relax guys, take a deep breath ............. step away from the keyboard