Chuck Most Posted September 29, 2010 Share Posted September 29, 2010 I'll say this about the casting quality... you'll think you're looking at cream-colored injected styrene, not resin, when you look at these parts. Not a pinhole or run in sight, just small scale car part goodness through and through! Here we have the bolt nut/stud set, which gives you 208 very cool fastener detail bits in sizes ranging from 072" to .028"' Next up we've got this cool Keystone wheel which, again, is beatifully cast and even includes an AMT style metal axle boss on the back side.... these would look great on a muscle car or early street machine! Or, if you're more into early '60's street rods or even Indy cars, these Halibrand 5-holers are just what the doctor ordered... Speaking of mucscle cars, who could use a Hurst Dual Gate shifter for an automatic? This one's very nice -though you'll need to clean up the handle a little, and the 'Hurst' and 'PRND' jibber-jabber is not only present, but legible! (Though this lousy picture doesn't even come close to doing it justice! But, I'm saving the best for last. Need those very cool Dick Cepek paddle tires for that 1:25 sled puller you KNOW you want to build, but can't find the Orange Blossom kit, or don't want to raid one for parts? Well, Ma's gotcha covered there too... The tires are molded in a soft rubber which is way more pliable than the original AMT vinyl, and the wheels are cleanly cast. As with the resin stuff, the tires are well shaped and blemish-free. Now I just need to get meeself one o' them Amphicar kits! Quote Link to comment Share on other sites More sharing options...
mr moto Posted September 29, 2010 Share Posted September 29, 2010 I just received some Dunlop SP3 radials from Ma's and the fine detail in the tread is amazing. I think "a star is born" in the resin business!! Great service, too. Quote Link to comment Share on other sites More sharing options...
Foxer Posted September 29, 2010 Share Posted September 29, 2010 (edited) Glad you posted these ... I have those bolts on order and now I know for SURE they are the one's I need! ... thou I never had any doubts .. ... Soon to become some 8 hole GMC steelies Edited September 29, 2010 by Foxer Quote Link to comment Share on other sites More sharing options...
crazyjim Posted September 30, 2010 Share Posted September 30, 2010 Al does some real fine work. I have a pair of his M/T Sportsman and Desert Dog tires with more on order. Also got some bead lock wheels and more on order. Real fine work on everything so far. Super service too!! (Okay Al - you can ship my order before Foxer's order) Quote Link to comment Share on other sites More sharing options...
jbwelda Posted September 30, 2010 Share Posted September 30, 2010 whats the url for ordering again? i need some of those nuts and bolts! Quote Link to comment Share on other sites More sharing options...
crazyjim Posted September 30, 2010 Share Posted September 30, 2010 http://public.fotki.com/cnaind/ Please tell Al I said hi. Quote Link to comment Share on other sites More sharing options...
roadhawg Posted September 30, 2010 Share Posted September 30, 2010 Here are the georgous BFG big n littles w/slots that he just started casting. I almost hate to put 'em on anything....I just want to sit and look at 'em all day! Quote Link to comment Share on other sites More sharing options...
jeffs396 Posted September 30, 2010 Share Posted September 30, 2010 Alan produces some High quality stuff & Well worth the money. X2!!! And with more cool stuff coming soon! Quote Link to comment Share on other sites More sharing options...
Lownslow Posted September 30, 2010 Share Posted September 30, 2010 These are the Off-Road tires & Wheels I sent in for Alan to Produce: Alan produces some High quality stuff & Well worth the money. indeed Quote Link to comment Share on other sites More sharing options...
Eshaver Posted September 30, 2010 Share Posted September 30, 2010 Chuck, I can attest to the great quality from Al at Ma's resins! he does some outstanding work . I'm a guniea pig of sorts for his 1 ton tires and a Dana rear he sent so I could get a another wrecker done . The pieces are flash free and the detail is superb ! I don't say this in too many cases but Al is definetly a high caliber resin caster !!!!!!! Ed Shaver Quote Link to comment Share on other sites More sharing options...
Chuck Most Posted September 30, 2010 Author Share Posted September 30, 2010 He must be- he's only been in the casting game for a short time and he's already THIS CLOSE to attaining legendary status! Quote Link to comment Share on other sites More sharing options...
crazyjim Posted September 30, 2010 Share Posted September 30, 2010 If we keep telling Al how good his work is, he might decide to raise prices. Just kidding, Al. Your items are fantastic and I don't care if you raise the prices. Quote Link to comment Share on other sites More sharing options...
mikeD1 Posted October 1, 2010 Share Posted October 1, 2010 i like them http://img.photobucket.com/albums/v333/roadhawg/IMG_0657.jpg Quote Link to comment Share on other sites More sharing options...
george 53 Posted October 1, 2010 Share Posted October 1, 2010 Alan Raab HAS made a name for himself with ME, as far as I am concerned! He is one of the coolest ,easiest to get along with resin casters that I've met inna LONG time! I've sent him masters after we spoke about some ideas i had. He agreed, and cast them up for me! Now their in his product line. He's got the ONLY GM Toronado/Eldorado front wheel drive Trans-axles on the market! Plus he has the VERY limited "66/ 76 "Strato Backed" BENCH seat too( It's a FULL sized bench seat with Strato Bucket seat backs) they were standard in Caprices, an the Pontiac "Grand Ville" NICE seats. ALL of Alans stuff is PREMIUM quality! He DON'T cast NO junk!!!!! If you deal with Al, you can rest ASSURED your gonna get a QUALITY product!!! Quote Link to comment Share on other sites More sharing options...
cnaind Posted October 2, 2010 Share Posted October 2, 2010 Thanks for ALL the nice comments guys It has been a fairly short time & I'm still learning from my mistakes. I enjoy casting & the people I've met thru modelling. Your suggestions are always welcome! And there will be no price increases..........except for people living in certain parts of Florida. Quote Link to comment Share on other sites More sharing options...
crazyjim Posted October 2, 2010 Share Posted October 2, 2010 I think you're picking on me, Al. Did you see your beadlocks on my Dodge D50 WIP post? I made a mistake by putting it in the General section instead of the Workbench section. Those wheels/tires do look good. Quote Link to comment Share on other sites More sharing options...
Guest Johnny Posted July 30, 2011 Share Posted July 30, 2011 Just have to give credit where it is due! I recently ordered some AA Truck wheels and tired from Alan and all I can say is they are incredible!!! They are really clean and well done! The rubber tires are really great and well detailed also! If this is any indication of the quality of the rest of Alan's work (and I hear it is), I highly recommend Ma's for resin parts! Quote Link to comment Share on other sites More sharing options...
Chuck Most Posted July 30, 2011 Author Share Posted July 30, 2011 Al does some fantastic stuff. I REALLY need to buy some more products from him! Quote Link to comment Share on other sites More sharing options...
diymirage Posted July 31, 2011 Share Posted July 31, 2011 im really excited to get my parts from him i've been waiting on a order to come in (i understand he does this on the side and soemtimes life gets in the way) Quote Link to comment Share on other sites More sharing options...
scale trucker Posted August 2, 2011 Share Posted August 2, 2011 how do i contact ma's resin? Quote Link to comment Share on other sites More sharing options...
Guest Johnny Posted August 2, 2011 Share Posted August 2, 2011 (edited) how do i contact ma's resin? email: idsaw57@ptd.net is what I used to get information from Alan! Might take a couple days for him to get back but he will get back with you! I found another address on his card. cnaind@ptd.net Phone# 610-573-9219 Edited August 2, 2011 by Johnny Quote Link to comment Share on other sites More sharing options...
southpier Posted August 3, 2011 Share Posted August 3, 2011 stuff shown here: http://public.fotki.com/cnaind/truck-tires--wheels/ Quote Link to comment Share on other sites More sharing options...
rickcaps55 Posted August 3, 2011 Share Posted August 3, 2011 Hi I just had to add I got the parts today I ordered from Alan and Damm he does nice work very nice any one looking to get parts from him will be very happy.Rick.; Quote Link to comment Share on other sites More sharing options...
mcandela Posted August 11, 2011 Share Posted August 11, 2011 Same here, great stuff and excelent quality!! Quote Link to comment Share on other sites More sharing options...
PatRedmond Posted December 9, 2011 Share Posted December 9, 2011 :angry: :angry: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.