Alyn Posted November 4, 2011 Author Share Posted November 4, 2011 I spy some Revell pro street Malibu wheels in the mockup. In retrospect, wished I would have picked out a more traditional wheel and tire combo. Still fairly big in the rear, but less billet looking. I ended up drilling out the Chevy emblems in the wheels and stripping the chrome to tone them down. Quote Link to comment Share on other sites More sharing options...
Chuck Most Posted November 4, 2011 Share Posted November 4, 2011 Future reference- the wheels from the Revell Lincoln MkVII kit are very cool- still kind of a billet style, but styled to resemble a wide-5 wheel. They even have the old-school V8 emblem engraved on the hubs. Since the Lincoln kit used the same tires as the Chevelle they fit those tires like a glove. Quote Link to comment Share on other sites More sharing options...
Alyn Posted November 4, 2011 Author Share Posted November 4, 2011 I just lost out on a bid on the same kit you're building. The wheel/tire package looks great. I'm surprised you're not using them. Another really nice build of this same kit took one of the Out of Box, or Stock awards at this years IPMS Nationals. Quote Link to comment Share on other sites More sharing options...
Chuck Most Posted November 4, 2011 Share Posted November 4, 2011 Oh, I'm saving those Lincoln rollers for a special project. No idea what its going to be just yet, though! Quote Link to comment Share on other sites More sharing options...
Bernard Kron Posted November 4, 2011 Share Posted November 4, 2011 Beautiful, radical work. Fearless plastic bashing at its best. The reshaping of the trunk area may be sacreligious, but it's truly inspired - it really complements the chopped and channeled lines by giving the car a more close coupled look. Build on, Alyn, build on!!!! Quote Link to comment Share on other sites More sharing options...
Jairus Posted November 4, 2011 Share Posted November 4, 2011 Some nice work here. Chopped and cutting open the doors? Boy, you are a brave one. Quote Link to comment Share on other sites More sharing options...
Dr. Cranky Posted November 4, 2011 Share Posted November 4, 2011 Amazing, it's looking great. Keep it going. Quote Link to comment Share on other sites More sharing options...
Guest Posted November 10, 2011 Share Posted November 10, 2011 Updates??? Quote Link to comment Share on other sites More sharing options...
rustybill1960 Posted November 11, 2011 Share Posted November 11, 2011 Totally AWESOME build going on here Dude! I really like what you are doing, er, done, uhm, did. I LIKE IT! A LOT!! Thank You for sharing this with Us all I am hooked on the plastic! Later Russ Quote Link to comment Share on other sites More sharing options...
Alyn Posted November 19, 2011 Author Share Posted November 19, 2011 So, the other day I open this AMT Ford C-600 Cab-over stake side kit. What a neat diversion from cars and light trucks. I just wanted to see what was in the box, but soon after the engine halves were glued together (the official start) and then I started fiddling with the frame ... Before you know it, the ideas are flowing and I'm working on another project. Sorry for neglecting this WIP. On with the '40 couple; To bump up the cool factor, I cut out a strip of .015" brass sheet for a visor. The middle was over bent, and then partially straightened to provide the center crease. Then the ends were bent over in a gentle curve. This was the toughest part of building the visor. It took about 10 or 15 tries before the fit was decent. I still think it's marginal, but life goes on. Here's a couple of shots of the coupe with the body work pretty much finished. The ruddy red primer will be the base color for the wear and tear stage. On to some other aspects of the build. Here's one of my favorite parts of this car. I ran across a Ken Hamilton tutorial on making Mexican blankets. Essentially, you lay individual strands of sewing thread side by side to build up a pattern. This one is made up of about 280 strands in 4 colors; one being green to tie in with the exterior paint. I took this concept a step further and used the Mexican blanket material as upholstery for my seat. Quote Link to comment Share on other sites More sharing options...
Dr. Cranky Posted November 19, 2011 Share Posted November 19, 2011 Awesome work! Quote Link to comment Share on other sites More sharing options...
LAone Posted November 19, 2011 Share Posted November 19, 2011 wow, that is some patience to make that mexican blanket(by far some of the best to keep warm) great touch of detail. Quote Link to comment Share on other sites More sharing options...
Mr Dedo Posted November 19, 2011 Share Posted November 19, 2011 How about trying the chopped radiator shell from the AMT American Graffiti kit? Different proportions, more specifically, shorter length. Quote Link to comment Share on other sites More sharing options...
Bernard Kron Posted November 20, 2011 Share Posted November 20, 2011 Nice stuff, Alyn. Once the primer went on the visor looked great - no worries... I really dig the seat. It looks like most of the seat is the stock kit piece but with the blanket fabric edges neatly tucked away. How on earth did you do it? As always, looking forward to more, more, more... Quote Link to comment Share on other sites More sharing options...
David G. Posted November 21, 2011 Share Posted November 21, 2011 Nice upholstry work! Can't wait to see the rest of it. David G. Quote Link to comment Share on other sites More sharing options...
Alyn Posted November 27, 2011 Author Share Posted November 27, 2011 (edited) Jeff, if you didn't catch the beginning post, this car is already complete. I didn't do a WIP during the build, so I'm do a brief retro-WIP now. Good thought though. Bernard, to get the edges of the fabric tucked away and achieve a clean edge, I cut the center panels out of the seat, upholstered and then re-inserted them. Here's the passenger side inner panel. I researched the inner structure on the internet and tried to create a reasonably accurate panel. Since I only opened the drivers side door, the passenger side is one piece, front and rear. Here's the panel mounted in position. I love these inner structure shots when the parts are in gray primer. Reminds me of working in a body shop. Edited November 27, 2011 by Alyn Quote Link to comment Share on other sites More sharing options...
Alyn Posted November 27, 2011 Author Share Posted November 27, 2011 Here's the drivers side door panel. The blob inside the door is epoxy holding the brass hinge. Once the inner panel is painted and weathered, this will provide some character. Window mechanism in place, but before the glass was added. Finally, a shot of the seat and side panel in place. The lower frame of the seat will eventually get some bright foil applied. On these older cars, I like to create the look of the top loader transmission. Instead of using the ball of the pin as a shift knob, I reverse it and create the shift lever socket. I haven't been able to find pins with silver balls in the smaller diameter. I paint the ball with Floquil bright silver. The crystal knob is two halves super glued together with a small section of brass at the base. Quote Link to comment Share on other sites More sharing options...
rustybill1960 Posted November 27, 2011 Share Posted November 27, 2011 (edited) Way Cool Alyn!! For sure Man!! Thank You for sharing Later Russ Edited November 27, 2011 by rustybill1960 Quote Link to comment Share on other sites More sharing options...
Greg Pugh Posted November 28, 2011 Share Posted November 28, 2011 Wow. This is fantastic!! Quote Link to comment Share on other sites More sharing options...
Joker Posted November 28, 2011 Share Posted November 28, 2011 Inspiring build..a tutorial at every update. Quote Link to comment Share on other sites More sharing options...
RodneyBad Posted November 28, 2011 Share Posted November 28, 2011 O WOW!!! Great details.. Quote Link to comment Share on other sites More sharing options...
Chuck Most Posted November 28, 2011 Share Posted November 28, 2011 Sweet! Just plain sweet. Oh, and careful with that C-series kit... those things are addictive. Quote Link to comment Share on other sites More sharing options...
Jantrix Posted November 28, 2011 Share Posted November 28, 2011 The crystal knob is two halves super glued together with a small section of brass at the base. Two halves of what? Quote Link to comment Share on other sites More sharing options...
Dr. Cranky Posted November 28, 2011 Share Posted November 28, 2011 Tremendous work on those doors. Keep it going, buddy. Quote Link to comment Share on other sites More sharing options...
Bernard Kron Posted November 28, 2011 Share Posted November 28, 2011 Loving every moment of this. A must-follow for us fabrication addicts. I have a general question. For small work like the cutouts in the door panels and the seat cushions, how do you cut so accurately? In the case of the seat cushions they had to have come out virtually intact in order to provide enough material to fit back in accurately. While round holes in the door panels can be created with a drill bit, how about the square ones? Inquiring minds want to know.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.