RyanK Posted October 18, 2012 Posted October 18, 2012 Here is my attempt at a traditional style 32 Ford. I started with the kit chassis and modified it to allow for the 40 Ford X bracing. I then added rear spring support from the 29 Ford. I cut off the kit front horns and made my own. I also made the motor mounts from sheet plastic. On to the body I cut the trunk open and I'm going to use the louvered trunk from the newer 5 window kit. I added the firewall from the AMT conv. vicky kit to somewhat represent a stockish firewall. Here is where I'm at with motor right now. I've machined a few parts for the motor. Here is a quick mock up of the car. Thanks for looking.
doggie427 Posted October 18, 2012 Posted October 18, 2012 Beautiful start Ryan ! I'm happy to see the stock firewall,something a lot of people overlook.
Ace-Garageguy Posted October 18, 2012 Posted October 18, 2012 Looking very good so far. The center x-member swap from a later-model car was one way it was really done. Making the front frame horns look correct, like the channel-section that they actually are, is a nice touch too. The model 'A' rear crossmember is the traditional way, again, and the mild channel job over the frame rails is going to give the car a very nice stance. Fine start for a traditional hot-rod '32.
bryan_m Posted October 19, 2012 Posted October 19, 2012 very nice! i have that eddie meyer intake here, gonna use it one of these days! keep it goin bryan
Pat Minarick Posted October 19, 2012 Posted October 19, 2012 Looks great ,needs to sit just like that!
crazyrichard Posted October 19, 2012 Posted October 19, 2012 oooh that soo nice , loving the detailed engine and machine work , the frame and body are spot on
frozono Posted October 19, 2012 Posted October 19, 2012 Love the engine......... waiting to see more........ nice.......
Gluhead Posted October 27, 2012 Posted October 27, 2012 I can't complain one bit about seeing another fine hot rod taking shape. Great touches so far. I'll be watching.
RyanK Posted March 1, 2013 Author Posted March 1, 2013 Well it has been a long time since I posted any progress. I have all the parts fabricated and now it is time to start painting all the parts. Here is the interior pieces. I'm using the dash board and steering wheel out of the 40 Ford. The side panels are made from striped plastic sheet and the top of the door panels are from the kit. With opening the trunk up I had to scratchbuild the side panels, top of the trunk and the floor. Since I shorted up the grill I scratchbuilt a new radiator.
W-409 Posted March 1, 2013 Posted March 1, 2013 Where did you get those Eddie Meyer parts to Flathead? Who makes them? I saw them somewhere few years ago, but did not buy them and never seen them anymore. I should have bought the set back then. Really nice work with it so far. I like seeing Traditional cars being built.
Bernard Kron Posted March 2, 2013 Posted March 2, 2013 Super classy work so far. A great selection of kit and aftermarket parts carefully assembled. Where did you get those Eddie Meyer parts to Flathead? Who makes them? I saw them somewhere few years ago, but did not buy them and never seen them anymore. I should have bought the set back then. Really nice work with it so far. I like seeing Traditional cars being built. Replicas & Minitaures of Maryland has them. Unfortunately they don't have a website. PM me with your e-mail address and I'll send you a PDF file of the latest catalog (2012). Incredible stuff. Huge selection and the best resin parts made anywhere. Unfortunately they are pretty much a one man operation (Norm Veber) so orders take 6-10 weeks to fill. Here are somelinks to pictures of some of their stuff: http://public.fotki.com/drasticplasticsmcc/1/2/1/after-market-source/replicasminiatureof/ http://public.fotki.com/crstan/replican-and-miniat/ http://public.fotki.com/davetoups/aftermarket_model_parts/replicas_and_miniat/
exesivefire Posted March 2, 2013 Posted March 2, 2013 Amazing start, just the inspiration I was looking for to start my roadster. Thanks for sharing!
crazyrichard Posted March 2, 2013 Posted March 2, 2013 still awsome cant waight to see some paint on that body
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now