426-Hemi Posted May 30, 2015 Posted May 30, 2015 any difference from the early Slant 6 in this kit to the later made ones? I have this kit when it had ERTL-MPC on the box (I'd have to look at the box date to see what year it might be close too.....) I'm making mine a LOW rider tho.... so I'm customizing a custom HMMMMMM
tim boyd Posted May 30, 2015 Posted May 30, 2015 I'm not aware of any changes whatsoever to the Dodge Slant Six....TIM
unclescott58 Posted May 31, 2015 Posted May 31, 2015 If this comes back with the original tonneau cover for the bed I'll buy another one. If not, I'll pass. Scott
thatz4u Posted May 31, 2015 Posted May 31, 2015 I'm not aware of any changes whatsoever to the Dodge Slant Six....TIM I agree with Tim, no noticable changes
426-Hemi Posted June 1, 2015 Posted June 1, 2015 -Thanks guys! I was unsure so. I got one and was wondering.....I also picked up what seems to be a resin valve cover thats from a Slant 6, but finned, AND is one made by "Offenhauser" with it written in the model part, and was wondering what kit it may have came from, as its really well done!
Mark Posted June 4, 2015 Posted June 4, 2015 -Thanks guys! I was unsure so. I got one and was wondering.....I also picked up what seems to be a resin valve cover thats from a Slant 6, but finned, AND is one made by "Offenhauser" with it written in the model part, and was wondering what kit it may have came from, as its really well done! That valve cover is probably from the XR-6. The Deora kit was created alongside the 1:1 build, and "got ahead of" the 1:1, so a few details are different. (That happened with the XR-6 also.) Deora differences include: side windows (kit has them, 1:1 does not), grille/headlamp details, and the front wheel opening "lip" (kit lower body crease goes straight back from the wheel opening, 1:1 drops down just a bit behind the wleel opening). The lower front door operation differs too, probably because it would have been pretty tough to make the kit door work like the 1:1.
gatorincebu Posted June 5, 2015 Posted June 5, 2015 If I am not mistaken. The Alexander brothers built the car as a concept show car.I had not heard about the design contest. But those were quite popular back in the early to mid 60's. I have the one with the camper shell . I am thinking of converting it to a 4X4! Be Well Gator
Mark Posted June 5, 2015 Posted June 5, 2015 I had not heard about the design contest. Be Well Gator The contest was to name the truck.
Eshaver Posted August 11, 2015 Posted August 11, 2015 Too bad A M T NEVER did the interior of this trend setting truck with a correct interior . I would have to really give it thought as to buying this as the MRSP is probably close to 30.00 an tax
unclescott58 Posted August 29, 2015 Posted August 29, 2015 Oh.... Seeing the above info from Round 2 on the upcoming reissue, I'll be buying one for sure. The box art is showing the original tonneau cover. I hope it's true.
tim boyd Posted October 6, 2015 Posted October 6, 2015 (edited) This is the version I'd like to see Other than the unique box art, you can put this version together with the Deora kit and the Chrysler Hemi engine from the reissued AMT Parts Packs (that's how this kit version was configured by AMT)....Obviously the builder was requested to do some kitbashing per the assembly instructions to get that big ol' first gen Hemi into and engine compartment designed for the much smaller "tower of power" Stant Six....Cheers....TIM Edited October 6, 2015 by tim boyd
tim boyd Posted October 22, 2015 Posted October 22, 2015 (edited) In case any of you reading this thread missed it, more Deora reissue is posted here: http://www.modelcarsmag.com/forums/topic/106995-regarding-your-questions-on-the-amt-dodge-deora-kit-reissue/Best regards...TIM Edited October 22, 2015 by tim boyd
tim boyd Posted December 31, 2015 Posted December 31, 2015 Just paid for and picked up the reissue Deora kit at the Model Cave in Ypsilanti, Michigan. (thanks John and Melissa!) I'm very impressed after a quick look-thru. I'll try to shoot and writeup and in-depth review in the next couple of days. Until then, I can only say that I am totally blown away by the new tires. They appear to be the Goodyear F60-15 tires, but with gold "Firestrone" lettering and a very narrow white oultline along the outside edge of the sidewall. I did not unpack them yet, but from what I could see through the clear plastic envelope, they look KILLER!!!! Best regards...TIM
MrObsessive Posted December 31, 2015 Posted December 31, 2015 I want to pick one of these up too Tim! I have one of the '80's reissues from MPC, and unfortunately, the roof has a bit of warp to it. Hopefully, at this weekend's club meeting the fellow that usually has all the latest kits (I want another '61 Pontiac too), will have the Deora. And yes, IMO those tires should make that a killer build!
Dave Van Posted December 31, 2015 Posted December 31, 2015 This is the version I'd like to see I have that issue.....and the top/roof is on the body with instructions about how to chop it off!!!! So as Tim said......you can make your own now that the bed cover has been restored!!!!
Draggon Posted January 4, 2016 Posted January 4, 2016 I have that issue.....and the top/roof is on the body with instructions about how to chop it off!!!!So as Tim said......you can make your own now that the bed cover has been restored!!!! Yep, that's my plan! Funny that I was building models when the Deora was first released. I've got a few bits from it, but have never had the kit.
Mr mopar Posted January 5, 2016 Posted January 5, 2016 would like to see MCG do a PE set for this kit ! like Dodge emblems ect.......
stavanzer Posted January 5, 2016 Posted January 5, 2016 Tim, I was hoping you would do a review of this kit. I'll have to block out an hour of my schedule when I see it posted.
Dave Van Posted January 5, 2016 Posted January 5, 2016 I got the reissue today....WOW.....I'll let Tim review as I am busy doing artwork for a new Moebius kit.....and Tim helped out on this kit...so he'd know more too.
unclescott58 Posted January 8, 2016 Posted January 8, 2016 Got my Deora today. You can see my review in "Car Kit News and Reviews" section. I like it.
tim boyd Posted January 11, 2016 Posted January 11, 2016 Here's the link to a full kit review....TIM http://www.modelcarsmag.com/forums/topic/109803-full-review-round-2s-reissue-of-the-amt-dodge-deora-kit/
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now