retroguy Posted April 19, 2013 Posted April 19, 2013 does anyone cast a 66 chevelle,I need one for a Smokey Yunick car...
my80malibu Posted April 19, 2013 Posted April 19, 2013 Monogram kitted one in 1/24 scale with a straight axle and tilt front end
Casey Posted April 19, 2013 Posted April 19, 2013 He probably needs a 1/28 scale body to do Smokey's car.
Alan Posted April 19, 2013 Posted April 19, 2013 Good one He probably needs a 1/28 scale body to do Smokey's car. Good one !! lol
Monty Posted April 19, 2013 Posted April 19, 2013 (edited) He probably needs a 1/28 scale body to do Smokey's car. Does anyone else remember the Hot Rod article from 1976(?) that showed several of his "tricks"? Seems like he had a hydraulic pump that would help the car clear the height blocks, but then drop the front end when out on the track. He also ran an extra long fuel line inside the car to give himself a little more gas. 'Course he justified it by saying everybody else did the same things... Casey's comment may refer to one of the occasions where his car didn't fit the offical NASCAR templates. The Hot Rod article implied that he may have made enough changes to the body to shrink it down to 7/8 of its regular size. Edited April 19, 2013 by Monty
jas1957 Posted April 19, 2013 Posted April 19, 2013 (edited) 1/28 scale...? Smokey's Chevelles used about every aero trick he could think of most not really NASCAR legal. Most noticable was that it was quite a bit smaller than a stock Chevelle. Edited April 19, 2013 by jas1957
Len Carsner Posted April 22, 2013 Posted April 22, 2013 I remember reading some place about the time Nascar tried to measure the car, only to find out it didn't match. Smokey told them go find a car i the parking lot and measure it. They found one in the front row of the parking lot, measured it and found that it matched Smokeys car, so they let him pass on and race. As it turned out the car in the parking lot was a "plant" and Smokey had modified it to match the race car. Tricked 'em again!
mikemodeler Posted April 22, 2013 Posted April 22, 2013 I remember reading some place about the time Nascar tried to measure the car, only to find out it didn't match. Smokey told them go find a car i the parking lot and measure it. They found one in the front row of the parking lot, measured it and found that it matched Smokeys car, so they let him pass on and race. As it turned out the car in the parking lot was a "plant" and Smokey had modified it to match the race car. Tricked 'em again! That, is a classic Smokey tale! He is the reason NASCAR developed the body templates that are used today.
VERNON Posted April 23, 2013 Posted April 23, 2013 check ebay once in a while. Lindberg made one several years ago, and they still pop up there at resonable prices. Good luck, Vernon
Edsel-Dan Posted April 23, 2013 Posted April 23, 2013 With Round2 buying Lindberg/Hawk, I would not be surprised to see it re-issued in a year or 2. Most of the Current Lindberg list prior to the Buy out is listed as returning to production. And look at the Announcement at NNL East Lawman 64 Plymouth And TOUCH-TONE Terror version of the Dodge A100!!
Dan Helferich Posted April 23, 2013 Posted April 23, 2013 I remember reading that Smokey watched the tech guys measure for engine off set by measuring the distance between the shock and the number 1 plug. Smokey offset the engine AND the shock without being caught.
69NovaYenko Posted April 27, 2013 Posted April 27, 2013 Smokey was crtainly one of NASCAR`s more colorful charters.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now