Daddyfink Posted October 6, 2013 Share Posted October 6, 2013 I actually started this one a while back and finally decided to get back on it. I always wanted to build this car and never could get my hands on one until my friend Skip Samples got his hands on the kit and had Joe Curtis at Fremont Resin copy it. The original body in the kit is a two piece affair, like the Ramchargers and Galloping Ghost kits, as it shares the same chassis, that is split down the middle like and aircraft fuselage. He glued them together and then cut he cowl out to make more used friendly. Skip also did up some decals for it using the originals and his own interpretation on them. The results, I must say, are much better than the kit supplied decals. They are simply printed up on an inkjet printer and not an alps, The only thing he did not do, was to print up the white underlays for them, and I did not realize this until I applied them with out giving it much thought! I might have to re-decal the car with some white underlays. The car is not done yet and I need to get my butt in gear to finish it!! Only some sponsor decals and fuel lines remain to complete the car. Body, Resin replica by Skip Samples and Fremont Resin with some front panel mods by me to make it more correct. Chassis, Junker Ramchargers car from the Junk Box Front Axle. From Tony Nancy Double kit Rear Tires and Wheels . Tires are Replicas and Miniature vintage Revell and the rims are from the Garlits Wynns Jammer Engine. Revell 57 Chevy Glue Bomb. This was the only 283 I had laying around.Blower and Hat are Revell Funny Car. Pulleys are Wynns Jammer with a homemade timing cover and pump. Headers are from Tony Nancy kit. Moon Tank is from same 57 Chevy Hope I did not bore you too much with details. Hope you like it and all questions and comments are welcome! Quote Link to comment Share on other sites More sharing options...
Steve Prideaux Posted October 6, 2013 Share Posted October 6, 2013 Great job Jesse. I also have the body from Joe and the decals from Skip, to do this car some day. I think we all miss Skip. Again great build. Steve Prideaux Quote Link to comment Share on other sites More sharing options...
1930fordpickup Posted October 6, 2013 Share Posted October 6, 2013 Looks great . Quote Link to comment Share on other sites More sharing options...
AZ Boy Posted October 6, 2013 Share Posted October 6, 2013 Real nice job on this, Jesse! Quote Link to comment Share on other sites More sharing options...
Daddyfink Posted October 6, 2013 Author Share Posted October 6, 2013 Thanks guys, hopefully I will finish this and then start on the Hunt Bros. car. Joe did a pretty nice body for that one too! Skip wanted to build this car with a 392 Hemi as he felt it would be more period correct, but, I always told him it had to have a SBC! Yeah, he would have busted my stones over this one! LOL! As an FYI, if anyone else is thinking of doing the SBC, be aware that like a real dragster set up for a HEMI, the chassis is too narrow for a Chevy! I had to grind the block under the heads to make it fit the chassis. Quote Link to comment Share on other sites More sharing options...
slusher Posted October 7, 2013 Share Posted October 7, 2013 That is one great looking model Jesse, real nice work... Quote Link to comment Share on other sites More sharing options...
Mooneyzs Posted October 7, 2013 Share Posted October 7, 2013 Very nice build. Looks great! Quote Link to comment Share on other sites More sharing options...
Truck parts Posted October 7, 2013 Share Posted October 7, 2013 Very nice build Quote Link to comment Share on other sites More sharing options...
PappyD340 Posted October 7, 2013 Share Posted October 7, 2013 Excellent job Jesse, looks great!! Quote Link to comment Share on other sites More sharing options...
90lowboy Posted October 8, 2013 Share Posted October 8, 2013 GREAT JOB... I have two of them but never got a chance to build one, some day... Quote Link to comment Share on other sites More sharing options...
ssroczyn Posted October 8, 2013 Share Posted October 8, 2013 Nice Build Jesse, Just curious, did you used to run/be a part of the San Diego Model Car Club that used to meet near Mira Mesa? Quote Link to comment Share on other sites More sharing options...
Daddyfink Posted October 8, 2013 Author Share Posted October 8, 2013 Thanks for the comments guys, I do appreciate it. And yes, Steve, I am in the San Diego Model Car Club and used to be its President for some time. We are now meeting at the Automotive Museum in Balboa Park! Quote Link to comment Share on other sites More sharing options...
Johnny Racer Posted October 9, 2013 Share Posted October 9, 2013 Awesome... one of my favorite movie cars!!! Quote Link to comment Share on other sites More sharing options...
lowtidelarry7 Posted October 9, 2013 Share Posted October 9, 2013 looks very sharp, hoping to do a vintage dragster myself one day. Quote Link to comment Share on other sites More sharing options...
DrewCfromSC Posted October 9, 2013 Share Posted October 9, 2013 thanks for posting this. Im currently scratch building one myself. Drew Quote Link to comment Share on other sites More sharing options...
Davewilly Posted October 9, 2013 Share Posted October 9, 2013 Very nice Quote Link to comment Share on other sites More sharing options...
b_lever1 Posted October 9, 2013 Share Posted October 9, 2013 Nice totally forgot about this car started the 32 still waiting to get back at it MOVING new house with focus on my shop. Quote Link to comment Share on other sites More sharing options...
Daddyfink Posted October 11, 2013 Author Share Posted October 11, 2013 Once again, thank you for the kind comments. I would like to build a matching '32 to book end this one along with the Hunt Bros. Dragster. Then maybe Falfa's 55 Quote Link to comment Share on other sites More sharing options...
Mister Twister Posted October 11, 2013 Share Posted October 11, 2013 (edited) Milner's dragster.....One of my favs...Nice job! Edited October 11, 2013 by Mister Twister Quote Link to comment Share on other sites More sharing options...
gasser59 Posted October 11, 2013 Share Posted October 11, 2013 Yep, this is really nice Jesse. Thanks for posting. Need to build one of these myself one day. Quote Link to comment Share on other sites More sharing options...
rv1963 Posted October 12, 2013 Share Posted October 12, 2013 Yep looks good to me, the movie was pretty good to. Quote Link to comment Share on other sites More sharing options...
carrucha Posted October 20, 2013 Share Posted October 20, 2013 Very good replica. The John Milner story is the only part of the movie that I liked. Quote Link to comment Share on other sites More sharing options...
Bill Edman Posted October 21, 2013 Share Posted October 21, 2013 awesome Quote Link to comment Share on other sites More sharing options...
Daddyfink Posted October 21, 2013 Author Share Posted October 21, 2013 Thanks guys, it is almost done! I applied some vintage style decals to the side flanks of the engine. I know the movie car had them along the back of the body work, but, I rarely have ever seen any swoopy body with decals back there. Just a few more details and it will be done. I promise! LOL! Quote Link to comment Share on other sites More sharing options...
Daddyfink Posted October 21, 2013 Author Share Posted October 21, 2013 Seeing how the tooling is good from the last issues as a Comp Coupe and the Ramchargers kit, they could just open the gate on the tooling for the swoopy body and issue it as a generic dragster or just leave the body in the kit as a surprise! . Chuck is making the decals and almost everything else has to be changed out to make it correct. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.