modelman81 Posted April 2, 2017 Share Posted April 2, 2017 It's labeled now as "pledge floor care finish" 2X more shine. Multi surface finish. Part# 746860. Bar code# 46500 00182. Quote Link to comment Share on other sites More sharing options...
426-Hemi Posted April 3, 2017 Share Posted April 3, 2017 Applying "Future Shine" to tires to put decals on them, how is it best done? Sprayed through an air brush or simply brushed on? (I plan to make some Redline tires, and would like to try this stuff as I got a little of it and want to see/get a feel, of how its used....-Thanks guys! Quote Link to comment Share on other sites More sharing options...
John Jacobs Posted December 16, 2017 Share Posted December 16, 2017 Sorry if this was already addressed in this thread. If Future is applied to parts before assembly and then regular cement is used to bond the parts together, does the Future prevent good bonding of the parts? I'm concerned that the layer of dried Future on the part will act as a barrier, preventing the parts from bonding in the same way that chrome plated parts do not bond well with regular plastic parts without using something like superglue. Quote Link to comment Share on other sites More sharing options...
High octane Posted December 16, 2017 Share Posted December 16, 2017 On 4/3/2017 at 12:16 AM, 426-Hemi said: Applying "Future Shine" to tires to put decals on them, how is it best done? Sprayed through an air brush or simply brushed on? (I plan to make some Redline tires, and would like to try this stuff as I got a little of it and want to see/get a feel, of how its used.... -Thanks guys! I recently did this to apply some white letters decals to a set of tires. I brushed the Future on and let it dry. I then applied the lettering decals and let them dry. Next I brushed some Future over the sidewalls of the tires and it looked pretty good. If you don't want the "shine," you can brush on some dull-cote acrylic over your decals instead. Quote Link to comment Share on other sites More sharing options...
935k3 Posted January 4, 2018 Share Posted January 4, 2018 On 4/3/2017 at 1:16 AM, 426-Hemi said: Applying "Future Shine" to tires to put decals on them, how is it best done? Sprayed through an air brush or simply brushed on? (I plan to make some Redline tires, and would like to try this stuff as I got a little of it and want to see/get a feel, of how its used.... -Thanks guys! It can easily be applied with a Q-Tip for tires. It really does help tire decals stick better and gets rid of "silvering" Quote Link to comment Share on other sites More sharing options...
Snake45 Posted January 27, 2018 Share Posted January 27, 2018 They've changed the name of the stuff again. Now it's "pledge revive it floor gloss" (yes, in all lower case.) You can see a picture of the "new improved" bottle here: http://www.network54.com/Forum/149674/thread/1517017992/last-1517021704/(View+All+Messages+In+This+Thread) Quote Link to comment Share on other sites More sharing options...
thatz4u Posted April 13, 2018 Share Posted April 13, 2018 I read that you can mix this stuff with talc to make a filler, anyone know the formula?? thanks Quote Link to comment Share on other sites More sharing options...
Deuces Posted July 19, 2018 Share Posted July 19, 2018 Can that stuff be mixed with rubbing alcohol to thin it out even more than it is???? Just curious... Quote Link to comment Share on other sites More sharing options...
High octane Posted July 19, 2018 Share Posted July 19, 2018 This is the stuff I use and I'm not buying any more everytime they decide to put on a new label. Quote Link to comment Share on other sites More sharing options...
CabDriver Posted July 21, 2018 Share Posted July 21, 2018 This is the stuff I got most recently: Works great (even though it says "Cleaner" on the label, which concerned me a little...) Quote Link to comment Share on other sites More sharing options...
John Pol Posted July 21, 2018 Share Posted July 21, 2018 I have tried never get good results with it any tips on how to airbrush it Quote Link to comment Share on other sites More sharing options...
ewetwo Posted January 5, 2019 Share Posted January 5, 2019 I've used it on a quite a few of my models and they looked great. But now a couple have developed a craze to the look. Either I didn't wait long enough before I applied it or it's a reaction to certain paints. I know the one model was painted well over a month before I applied the Future shine so I don't know why it's happening. Quote Link to comment Share on other sites More sharing options...
Snake45 Posted January 5, 2019 Share Posted January 5, 2019 1 hour ago, ewetwo said: I've used it on a quite a few of my models and they looked great. But now a couple have developed a craze to the look. Either I didn't wait long enough before I applied it or it's a reaction to certain paints. I know the one model was painted well over a month before I applied the Future shine so I don't know why it's happening. Model Airplane World has been using Future since the '70s and this isn't uncommon. I've had it happen to at least one of my airplanes on which I used Future. This is why I don't use it much anymore. Fortunately, it's easy to remove: It comes right off with either common household ammonia or rubbing alcohol. CAUTION: Don't let ammonia anywhere near plated (chrome) kit parts, as it will strip plating. It will also strip some acrylic paints. Rubbing alcohol will strip AMT and Testor lacquers and some kinds of acrylics. Both are okay for stripping Future off anything that's been painted with enamels. If you applied decals or any painted trim over the Future, of course those will be stripped off too. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted January 5, 2019 Share Posted January 5, 2019 Isn't this the stuff that also works great as a dessert topping and a breath freshener? That's what I heard from my cat's vet's poolboy's 1/2 sister's aunt's chiropractor. Quote Link to comment Share on other sites More sharing options...
RichCostello Posted January 6, 2019 Share Posted January 6, 2019 Can this be tinted with food coloring to make window tint? Quote Link to comment Share on other sites More sharing options...
CabDriver Posted January 6, 2019 Share Posted January 6, 2019 28 minutes ago, RichCostello said: Can this be tinted with food coloring to make window tint? Yup! You only need a small quantity of the dye in the mix for it to work, usually but it works great! Quote Link to comment Share on other sites More sharing options...
RichCostello Posted January 6, 2019 Share Posted January 6, 2019 22 minutes ago, CabDriver said: Yup! You only need a small quantity of the dye in the mix for it to work, usually but it works great! Cool, thanks. Gotta get me some of that stuff. Quote Link to comment Share on other sites More sharing options...
Drew666 Posted February 5, 2019 Share Posted February 5, 2019 so i contacted Pledge to find out what exactly replaced future, this is the product that took it's place. and just a heads up, if you contact them they will send you a vendor coupon for a free bottle. Quote Link to comment Share on other sites More sharing options...
BigTallDad Posted February 5, 2019 Share Posted February 5, 2019 On 1/5/2019 at 8:12 PM, RichCostello said: Can this be tinted with food coloring to make window tint? You can also use watercolors...chip off a small piece and dissolve it in the liquid. The water colors work well for washing chrome, so you get two different uses for a set of eight colors (make sure the set has white, for dog-dish hub caps) that cost a little over a dollar at Walmart. ps Quote Link to comment Share on other sites More sharing options...
Evlwevl Posted February 26, 2019 Share Posted February 26, 2019 (edited) I now use pledge religiously on all of my windows, headlights or anything I want to appear as glass. I also use it to fortify cheap Walmart acrylic paint when airbrushing. I like the semi gloss finish When mixed with paint and also use it as an underbase for my decals and over the top of my decals before my matte varnish. I however have stopped using it for any finish I want polished. I was never able to achieve the kind of deep lasting finish a polished Laquer clear can provide. A few of the times, I tried using it as a top coat, it would spray on really wet but would soon die back to a slightly orange peel finish. I tried polishing several times but maybe I polished too early as I would quickly burn through so I now only use it on anything that doesn’t get polished like car interiors, under carriage, military and weathered vehicles. Top 2 photos with acrylic yellow base and pledge topcoat. Botttom 2 photos .with model master yellow laquer base and model master deep gloss clear after polishing. Edited February 26, 2019 by Evlwevl Added photos Quote Link to comment Share on other sites More sharing options...
Bill J Posted February 26, 2019 Share Posted February 26, 2019 I finally gave in and bought a bottle of this stuff. I am usually not a clear coat person, I look at it as one more opportunity to ruin my paint job. I have ruined a few with Testor's enamel clear, Tamiya TS-13 and a try of clear lacquer. I live where it is warm and dry and really have not had problems with decals or plain finishes. So, I do have a car that is partly painted gold that I need to clear before applying decals and after seeing a modeling buddies car that he coated with the floor shine, I thought I would give it a try. Worse case, I am out like $6.18 and I can use the stuff on the floor or something. I have excellent luck with the Tamiya TS paints, although the TS-13 ruined a car that had been painted for years when I decided to make it more shiny. Now it is crazed and pretty much ruined. Not sure why that happened. Paint is such a finicky critter. Today I sprayed some Scalefinishes acrylic enamel paint over some Tamiya white primer, which is my normal procedure and the paint weirded out in spots, having to strip the whole thing. That only happened one other time, maybe I sprayed too much on at once. Quote Link to comment Share on other sites More sharing options...
cobraman Posted February 26, 2019 Share Posted February 26, 2019 I got a bottle to try yesterday. I used it today on a model i built a couple weeks ago. I was not impressed. I brushed it on and it was very shiny but I did notice some bubbles. When I checked it later it looked like the bubbles were gone but it had turned more dull. I used it over a model that had been cleared but was not very shiny. Was that a mistake on my part ? Does it need to be applied to bare paint only ? Better with airbrush I suspect. At least I can use it on some of my tile in my house I guess. Quote Link to comment Share on other sites More sharing options...
Evlwevl Posted February 26, 2019 Share Posted February 26, 2019 39 minutes ago, cobraman said: I got a bottle to try yesterday. I used it today on a model i built a couple weeks ago. I was not impressed. I brushed it on and it was very shiny but I did notice some bubbles. When I checked it later it looked like the bubbles were gone but it had turned more dull. I used it over a model that had been cleared but was not very shiny. Was that a mistake on my part ? Does it need to be applied to bare paint only ? Better with airbrush I suspect. At least I can use it on some of my tile in my house I guess. That’s the dieback I was speaking of in the first two photo examples I posted. I don’t know if I was expecting too much but having painted 1:1 cars, I have an idea what I’m looking for and I just couldn’t achieve it with pledge like I’m able to do with laquer. It appears other self are quite happy with the results and their results look pretty good Quote Link to comment Share on other sites More sharing options...
martinfan5 Posted February 27, 2019 Share Posted February 27, 2019 It makes a great floor polish. Quote Link to comment Share on other sites More sharing options...
Miatatom Posted February 27, 2019 Share Posted February 27, 2019 35 minutes ago, martinfan5 said: It makes a great floor polish. The kitchen floor looks great! As others have said, I use it for clear parts and add it to craft acrylics to spray chassis parts. Tried it once on a body. Not impressed. There's other stuff that works way better. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.