mustang1989 Posted January 3, 2015 Author Posted January 3, 2015 keep going Joe, looking great! At times I have my doubts but I'm plugging away at it anyways. Thanks for the mental boost Tom!
mustang1989 Posted January 3, 2015 Author Posted January 3, 2015 Well last night I was looking at my engine compartment and comparing it to the references I have and bam! It hit me! I didn't have the cowl and the side strips at the fender/engine compartment border painted black! Oh man! I got up early again this morning and masked everything off and corrected that and then installed the windshield wiper motor area onto the firewall. Here's the wiper motor area before installation with the light wash still in the process of drying. and here is the corrected cowl and side strip area with the motor assy installed onto the firewall.......... Now for the voltage regulator................................
Mopar - D Posted January 3, 2015 Posted January 3, 2015 Joe nice transplant on the wiper assembley and good catch on the black on the top fo the fenders. This is a item that is easy to be missed.
oldscool Posted January 3, 2015 Posted January 3, 2015 You are doing some great work on this kit. Kudos from a lifelong MOPAR fan.
mustang1989 Posted January 4, 2015 Author Posted January 4, 2015 I did some detail painting in the engine compartment this morning but need to do some touch up so while the paint was drying there I switched over to the tires. I got ahold of Joe at fireball and rather than sell me something decal wise , he gave me the idea for an acrylic fine point white Sharpie at HL to paint them with. I'll be doing business with this guy because you just don't find folks everywhere in the market world who aren't in it for every dollar they can stand......and then some. The acrylic pen idea worked. I still have to apply a light dull coat over the tires for a true tire "look" but I'm sure happy with the results so far:
tbill Posted January 4, 2015 Posted January 4, 2015 wow, looks fabulous. this just gets better and better! keep at it, won't be long now...
jaftygas Posted January 4, 2015 Posted January 4, 2015 Isn't it cool a guy can take a model he built 3 decades ago and restore it even better like he's onwed the real car, and say hmm this thing needs a face lift. Very good work Joe.
jefropas Posted January 5, 2015 Posted January 5, 2015 I haven't checked this for a few days, funny, I just cast a mold of the wiper motor from my 25th scale R/T-T/A, tat you cut off, and was gonna make a few resin copies for my builds. Looks just great so far! Jeff
mustang1989 Posted January 5, 2015 Author Posted January 5, 2015 Thanks Dan and Tom. With the time that all the detail in consuming I'll probably be on this thing for another two to three months!!! lol Joe:Thanks man! I just couldn't help myself once I got started. lol . I do TONS of research when I build so I don't leave anything to imagination. Cars I've found are alot easier in that regard because for the most part there's plenty of examples and the reference photos are plentiful. I'm having alot of fun with just that aspect alone. Jeff:Thanks you sir! I haven't gotten into the resin copying yet. Maybe I'll drift that way the longer I keep my position as plastic surgeon of the house! lol
mustang1989 Posted January 5, 2015 Author Posted January 5, 2015 (edited) Voltage regulator painted and wired up. Now I just have to find some 48th scale stenciling decals laying around in my stash to put some lettering on this thing and gloss it over once. Edited January 5, 2015 by mustang1989
slusher Posted January 5, 2015 Posted January 5, 2015 Like the firewall detailing. You make it look easy. Could you take a picture of the acrylic Sharpie I would like to find one....?
Monty Posted January 5, 2015 Posted January 5, 2015 (edited) I did some detail painting in the engine compartment this morning but need to do some touch up so while the paint was drying there I switched over to the tires. I got ahold of Joe at fireball and rather than sell me something decal wise , he gave me the idea for an acrylic fine point white Sharpie at HL to paint them with. I'll be doing business with this guy because you just don't find folks everywhere in the market world who aren't in it for every dollar they can stand......and then some. The acrylic pen idea worked. I still have to apply a light dull coat over the tires for a true tire "look" but I'm sure happy with the results so far: I hope you won't mind a friendly suggestion. Your tire lettering turned out nicely, but you can improve it with very little effort. As you know, the white letters on 1:1 tires are flat across the exposed surface, whereas vinyl tires lettered with paint or gel pens can have high and low spots that resulted from the means of application. Here's how you fix that: After the paint/gel has sufficiently dried, find a very light grade of hobby sanding stick or sandpaper and sand gently straight across the letters' surface until the lettering medium levels out. You can finish off by using a sharpened toothpick to chase out any paint/gel that may have flowed down into the open parts of any of the letters. With just a little bit of effort, you'll start to see the letters become "crisper". Again, I hope you'll take that as a helpful hint as opposed to a critique of your abilities. This build has a lot of potential, and I can't wait to see how it ends up. Lastly, I couldn't agree more about Chief Joseph being a great member and supporter of the hobby. Edited January 5, 2015 by Monty
mustang1989 Posted January 5, 2015 Author Posted January 5, 2015 Thanks Dan! Carl:Thanks and I'll have a pic of that Sharpie posted later on. I got it from Hobby Lobby of all places. Monty: The advice is appreciated very much. I'll give that a shot with the sandpaper. I'll be revisiting the toothpick idea again as I tried it at the time of painting and it was hit or miss on getting the excess white out of the "holes" of the letters. I'll try sharpening one up a bit now that the paint has dried and cured out a bit. Thanks bud.
iheartkits Posted January 6, 2015 Posted January 6, 2015 This is a great and well-documented build of a fantastic automobile. Keep it up!
mustang1989 Posted January 6, 2015 Author Posted January 6, 2015 Carl: I have a couple of pics of the paint pen below. Elmer's makes it so I've given the name and part number for you dude. James:Thanks for your comments bud! Jim:I appreciate the encouraging "chime in" !
mustang1989 Posted January 6, 2015 Author Posted January 6, 2015 (edited) Ok fellas! Today's update. I re-focused my attention back to the tires after Monty gave me a pointer or two. I was mostly happy with the outcome but think overall its my lack of experience with the white lettering on these tires. I touched 'em all up a tad and ended up having to completely start over on one rear tire due to the "G" just disappearing when I tried to wipe away the paint after a disastrous touch up session with it. No worries, I had an extra one in the stash. Hated robbing one but hey, that's modeling. I'm going to stop while I'm ahead with these things before my OCD starts kicking in. What I want to do is paint about 5 sets of these things in succession to get good at it..........NOW ( I do this kind of stuff when I get frustrated-I spent a solid hour stretching sprue over a candle and ended up mastering that so well that I can get sprue stretched well beyond hair follicle diameter every time!) but I don't have that kind of time this morning............................maybe later. lol ! Here's before: and here's now: other progress this morning was the installation of the now painted blower motor into the firewall and initial painting of the battery. I've also got the master cylinder holes drilled for the brake lines and the reservoir cap retainer. The engine bay(looks like I got a little carried away with the paint on the battery--corrections coming.....): As a feeler for a future project, I was wondering from the crowd if (after I'm finished with this Challenger) if I could start a WIP here on an upcoming project I have. I'm not going to build the whole thing here but planned on building at least the power plant end of it here in it's own thread. We're all gear heads here so I was wondering if (when I get to that point) if I could build at least the Daimler Benz DB605 here from my Bf109 build that's coming up? Thoughts? If I it's not recommended then I will post it in the All the Rest section but I'm having a blast out here in the mainstream building with you guys. Here's the kit (and yes ...........this thing is it's own kit in 1/48 th scale). I don't know what the parts count is but it's alot and comes with an 8 page instruction booklet. The Eduard Brassin engine in 48th scale: One page out of the instructions: and the resin engine block: Edited January 6, 2015 by mustang1989
Mopar - D Posted January 6, 2015 Posted January 6, 2015 Joe the tires are better looking the 2nd time around and the firewall looks good to. Just let us know where you end up posting your engine build. I'm interested in how your going to detail it out.
mustang1989 Posted January 6, 2015 Author Posted January 6, 2015 Thanks a lot Dan!! I'll keep you posted on the DB build and the detailing is gonna get stoooopid!!!!
slusher Posted January 6, 2015 Posted January 6, 2015 Great work Joe on the firewall and tires. Thank you I am going to find one of those paint pins...
mustang1989 Posted January 6, 2015 Author Posted January 6, 2015 Thanks Carl! Yeah that pen helped me out a lot.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now