Bullybeef Posted January 6, 2021 Share Posted January 6, 2021 So I’m going to attempt to not smash this one out and take some careful time getting this one right, as you may know about me, I find a pic on the internet and try my best to make as representable account of it in 1/25 scale, usually with my own little twist. So this one is kind of different. my Friend Matt Murray (Iron trap garage on YouTube) has a 33 3 window, he has just started to work on it and it is in its rawest form, I’m going to try to replicate this car in it’s finished state. So I’ll be looking into the future a little and maybe adding my own twist to the final result. So here are a couple of pics of his car, and the pile of plastic I’ll be starting with. I may be overstepping my skills, but hell I’m up for the challenge! follow along and as always all comments are welcome! Quote Link to comment Share on other sites More sharing options...
SpeedShift Posted January 7, 2021 Share Posted January 7, 2021 (edited) Excellent subject ....go for it!' I recommend getting the Replicas and Miniatures Ardun heads and SCOTT blower...very good resin pieces. Ardun Head Kit, Replicas & Miniatures Company of Maryland DD-16 (2016) (scalemates.com) S.C.O.T. Blower for Ford Flathead, Replicas & Miniatures Company of Maryland FH-90 (2016) (scalemates.com) Edited January 7, 2021 by SpeedShift Quote Link to comment Share on other sites More sharing options...
Bullybeef Posted January 7, 2021 Author Share Posted January 7, 2021 8 minutes ago, SpeedShift said: Excellent subject ....go for it!' I recommend getting the Replicas and Miniatures Ardun heads and SCOTT blower...very good resin pieces. Ardun Head Kit, Replicas & Miniatures Company of Maryland DD-16 (2016) (scalemates.com) S.C.O.T. Blower for Ford Flathead, Replicas & Miniatures Company of Maryland FH-90 (2016) (scalemates.com) That may not happen unless I find them for-sale in Canada, I’m still waiting on a parcel from Montana that was mailed on Dec 8th. still shows in transit Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted January 7, 2021 Share Posted January 7, 2021 Yup...a S.C.o.T.-blown Ardun-Ford in a '33 3-window...most definitely my kinda car. NOTE: This Revell kit has a very good Ardun. No S.C.o.T. blower, but it's a start. The ancient AMT '57 Chevy has a sorta S.C.o.T blower too... Quote Link to comment Share on other sites More sharing options...
SpeedShift Posted January 7, 2021 Share Posted January 7, 2021 (edited) 48 minutes ago, Bullybeef said: That may not happen unless I find them for-sale in Canada, I’m still waiting on a parcel from Montana that was mailed on Dec 8th. still shows in transit I might be able to help you with that....I know Norm, he's putting a big order together for me now. Ardun heads on my 33 Ford Salt Flat project....and jbwelda's project using the R&M SCOTT blower Edited January 7, 2021 by SpeedShift 1 Quote Link to comment Share on other sites More sharing options...
Bullybeef Posted January 7, 2021 Author Share Posted January 7, 2021 55 minutes ago, Ace-Garageguy said: Yup...a S.C.o.T.-blown Ardun-Ford in a '33 3-window...most definitely my kinda car. NOTE: This Revell kit has a very good Ardun. No S.C.o.T. blower, but it's a start. The ancient AMT '57 Chevy has a sorta S.C.o.T blower too... I’m hoping To source one of those this weekend! Quote Link to comment Share on other sites More sharing options...
Bullybeef Posted January 7, 2021 Author Share Posted January 7, 2021 29 minutes ago, SpeedShift said: I might be able to help you with that....I know Norm, he's putting a big order together for me now. Ardun heads on my 33 Ford Salt Flat project....and jbwelda's project using the R&M SCOTT blower Unless you are in Canada I’m afraid that may not be helpful! Quote Link to comment Share on other sites More sharing options...
Bullybeef Posted January 7, 2021 Author Share Posted January 7, 2021 This is too nice and rare to cut up for a hot rod. monogram 1/24 early iron, got it with a pile of rebuilders and shells. Quote Link to comment Share on other sites More sharing options...
Bullybeef Posted January 7, 2021 Author Share Posted January 7, 2021 Did some required surgery, things are starting to align I’m happy and the body work will continue, still on the hunt for an amt 34 frame to put under this, I don’t think the snapper frame is correct enough for my liking. I had removed the roof from the 3 window in hopes of fitting it to the other body, but I realized the door lines didn’t line up, (yes I could have scribed new ones) I’m trying to not let this get ahead of my skills too far so that it doesn’t end up as an unfinished build! Quote Link to comment Share on other sites More sharing options...
NOBLNG Posted January 7, 2021 Share Posted January 7, 2021 10 hours ago, Bullybeef said: I may be overstepping my skills, but hell I’m up for the challenge! follow along and as always all comments are welcome! That’s called growth and it can be lots of fun in this hobby. And this one looks like fun to watch too.? Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted January 7, 2021 Share Posted January 7, 2021 This is going to be a good one to ride along with. I'm in. Can't wait to see how it progresses. BTW- I like your buddy's shop! Later- Quote Link to comment Share on other sites More sharing options...
Kit Karson Posted January 7, 2021 Share Posted January 7, 2021 Admirable effort! Been down this road myself... not an easy process, is it? Keep going and be sure that there will be a few of us that will be watching over your shoulder, Brother! -KK Quote Link to comment Share on other sites More sharing options...
Bullybeef Posted January 7, 2021 Author Share Posted January 7, 2021 1 hour ago, Kit Karson said: Admirable effort! Been down this road myself... not an easy process, is it? Keep going and be sure that there will be a few of us that will be watching over your shoulder, Brother! -KK Thank you, I think my biggest challenge right now will be the frame, all I have to start with is the snapper frame, I could not locate locally a full kit, so there will be some doubting moments Quote Link to comment Share on other sites More sharing options...
Kit Karson Posted January 7, 2021 Share Posted January 7, 2021 22 minutes ago, Bullybeef said: Thank you, I think my biggest challenge right now will be the frame, all I have to start with is the snapper frame, I could not locate locally a full kit, so there will be some doubting moments Not to interrupt your progress on this project, but if you'd like to have a "full" kit, I might be able to help! -KK Let me know, OK? Quote Link to comment Share on other sites More sharing options...
gman Posted January 7, 2021 Share Posted January 7, 2021 15 hours ago, SpeedShift said: Excellent subject ....go for it!' I recommend getting the Replicas and Miniatures Ardun heads and SCOTT blower...very good resin pieces. Ardun Head Kit, Replicas & Miniatures Company of Maryland DD-16 (2016) (scalemates.com) S.C.O.T. Blower for Ford Flathead, Replicas & Miniatures Company of Maryland FH-90 (2016) (scalemates.com) Agreed- OP's inspiration has been started with excellent raw materials. and RMCoM's resins will be an equally excellent foundation. Some of the finest scale resin hot rod parts you can hope for. If the Ardun in Monogram/Revell's 1950 Ford is the desired way to go, the model with the yellow build up on the box top has the redesigned Ardun parts, a much better choice than the other issues. Quote Link to comment Share on other sites More sharing options...
Bullybeef Posted January 7, 2021 Author Share Posted January 7, 2021 2 hours ago, Kit Karson said: Not to interrupt your progress on this project, but if you'd like to have a "full" kit, I might be able to help! -KK Let me know, OK? That would be greatly appreciated, but unless you are in Canada I don’t think that would be an affordable option. And considering shipping from the us right now is darn near the price of a new kit locally, and delays of up to 30-45 days sigh Quote Link to comment Share on other sites More sharing options...
Bullybeef Posted January 7, 2021 Author Share Posted January 7, 2021 1 hour ago, gman said: Agreed- OP's inspiration has been started with excellent raw materials. and RMCoM's resins will be an equally excellent foundation. Some of the finest scale resin hot rod parts you can hope for. If the Ardun in Monogram/Revell's 1950 Ford is the desired way to go, the model with the yellow build up on the box top has the redesigned Ardun parts, a much better choice than the other issues. Ok I’m hopeful to source one this weekend, a local modeller from a fb group has invited me to do some trading this weekend. he has offered all his flathead engines and parts and potential scot blower Quote Link to comment Share on other sites More sharing options...
Kit Karson Posted January 7, 2021 Share Posted January 7, 2021 1 hour ago, Bullybeef said: That would be greatly appreciated, but unless you are in Canada I don’t think that would be an affordable option. And considering shipping from the us right now is darn near the price of a new kit locally, and delays of up to 30-45 days sigh Offer stands, Brother! If it's parts you need, I might be able to mail you what you're needing!?. -KK Quote Link to comment Share on other sites More sharing options...
Bullybeef Posted January 7, 2021 Author Share Posted January 7, 2021 22 minutes ago, Kit Karson said: Offer stands, Brother! If it's parts you need, I might be able to mail you what you're needing!?. -KK Realistically all I need is the frame as most of the rest of the parts will change and/or be modified. But that being said, the rad/and grille could be useful. Quote Link to comment Share on other sites More sharing options...
Bullybeef Posted January 7, 2021 Author Share Posted January 7, 2021 Some progress today,mocked up the snapper frame rails/floor pan and did some trimming with my dremel, dug out a 31 for frame and trimmed some pieces to add to the rails. roughly fabricated some engine mounts so that I can place a mock up engine in the rails, help keep everything in line. I will be using the front suspension from an amt 41 woody that I got as a trashy rebuilder, the x brace and rear from that kit will work as well. I’ll hopefully use the quick change from the 25t as well Quote Link to comment Share on other sites More sharing options...
Kit Karson Posted January 7, 2021 Share Posted January 7, 2021 3 hours ago, Bullybeef said: Realistically all I need is the frame as most of the rest of the parts will change and/or be modified. But that being said, the rad/and grille could be useful. Kool! PM me your list, Brother! Quote Link to comment Share on other sites More sharing options...
Bullybeef Posted January 7, 2021 Author Share Posted January 7, 2021 21 minutes ago, Kit Karson said: Kool! PM me your list, Brother! Pm sent ?? Quote Link to comment Share on other sites More sharing options...
Bullybeef Posted January 8, 2021 Author Share Posted January 8, 2021 Only a 1 pic update at a stalemate til glue dries Quote Link to comment Share on other sites More sharing options...
Dennis Lacy Posted January 8, 2021 Share Posted January 8, 2021 Interesting approach to adding a firewall and removed hood to that body. Looking forward to seeing how it turns out. And pretty neat that you’re friends with Iron Trap. That’s a really neat project he’s started! Quote Link to comment Share on other sites More sharing options...
Bullybeef Posted January 8, 2021 Author Share Posted January 8, 2021 30 minutes ago, Dennis Lacy said: Interesting approach to adding a firewall and removed hood to that body. Looking forward to seeing how it turns out. And pretty neat that you’re friends with Iron Trap. That’s a really neat project he’s started! Dennis, Matt and I have history in the vw world, when he switched over to hot rods, I stayed true to my roots, but after binge watching his channel while I was on med leave, I decided to emulate his passion for old steel, but in plastic form. And I’ve always had a thing for the 32 and 33 fords. Being that this was the first time I’ve attempted slicing and joining bodies, I guess I took the hard way instead of the easy way. Well we will see how it works out. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.