seabiscut88 Posted February 23, 2021 Share Posted February 23, 2021 Well have the body and parts painted still need to go in and detail paint motor and interior and some other bits and pieces which I enjoy but not liking how the paint on the body isn’t all consistent so not sure might put another layer of paint on the body parts. Used Rust-Oleum gloss apple red on top of Rust-Oleum flat gray and flat black primers. Quote Link to comment Share on other sites More sharing options...
Bainford Posted February 23, 2021 Share Posted February 23, 2021 Nice colour, but it appears the plastic might have experienced crazing. This occurs when a paint is 'too hot' (chemically speaking) and it attacks the plastic. Would need to see photos of the body in better lighting to tell for sure. Quote Link to comment Share on other sites More sharing options...
seabiscut88 Posted February 23, 2021 Author Share Posted February 23, 2021 Just now, Bainford said: Nice colour, but it appears the plastic might have experienced crazing. This occurs when a paint is 'too hot' (chemically speaking) and it attacks the plastic. Would need to see photos of the body in better lighting to tell for sure. Wow thank you for the reply and info that is very helpful actually. I had heard it was best to warm your paint cans prior to painting. I have a sink in my garage I would run hot water into a glass and let the paint can sit in that for 5-10 minutes to warm up prior to spraying anything. Quote Link to comment Share on other sites More sharing options...
FLHCAHZ Posted February 23, 2021 Share Posted February 23, 2021 I think he means chemically aggressive as "hot" and not necessarily the temp of the paint. Quote Link to comment Share on other sites More sharing options...
Bainford Posted February 23, 2021 Share Posted February 23, 2021 When I say the paint is 'too hot', I'm not referring to temperature of the paint, but of the chemical aggressiveness of the solvents that make up the paint. I can't tell for certain if it is crazing without seeing photos in better lighting. Crazing manifests itself as a rough texture in the finished paint, but it is actually the plastic itself that has developed the rough texture. The 'hot' paint attacks the surface of the plastic and causes the surface to go grainy and pebbly. This can be avoided by proper preparation of the plastic before painting (which involves a learning curve) or by sticking with paints and primers formulated specifically for plastic models. Or, pretty much any acrylic paint will be safe, too. Quote Link to comment Share on other sites More sharing options...
seabiscut88 Posted February 23, 2021 Author Share Posted February 23, 2021 2 minutes ago, Bainford said: When I say the paint is 'too hot', I'm not referring to temperature of the paint, but of the chemical aggressiveness of the solvents that make up the paint. I can't tell for certain if it is crazing without seeing photos in better lighting. Crazing manifests itself as a rough texture in the finished paint, but it is actually the plastic itself that has developed the rough texture. The 'hot' paint attacks the surface of the plastic and causes the surface to go grainy and pebbly. This can be avoided by proper preparation of the plastic before painting (which involves a learning curve) or by sticking with paints and primers formulated specifically for plastic models. Or, pretty much any acrylic paint will be safe, too. I gotcha I was taking ya to literally... That makes sense. I usually try and do a nice 600grit then 1,000grit sanding to the body before paint then wash it with Dawn dish soap and let it sit for a day before I paint it. I can see the roughness you are talking about and I think you are spot on. Thanks for the info! Quote Link to comment Share on other sites More sharing options...
Rockford Posted February 23, 2021 Share Posted February 23, 2021 Thats such a shame. You used two primers too! I hope you get it sorted out. Quote Link to comment Share on other sites More sharing options...
seabiscut88 Posted April 5, 2021 Author Share Posted April 5, 2021 Wow been longer than I thought... Haven’t had any time but to walk by my models to and from work for awhile but I should have some time now. I just stripped this and have had it sitting in the garage workstation until today. Going to try and primer it again and use a different color I will hopefully get to pick/spray sometime this week/weekend if life doesn’t get in the way again.... Quote Link to comment Share on other sites More sharing options...
Oldcarfan27 Posted April 5, 2021 Share Posted April 5, 2021 I sure wouldn't use Rustoleum enamels as my primer or base color paint. It's just too thick and uncontrollable for model cars. Although I do use their clear lacquer on top of automotive touch up paint (also lacquer) and there it works great! Quote Link to comment Share on other sites More sharing options...
seabiscut88 Posted April 6, 2021 Author Share Posted April 6, 2021 Okay was at Autozone today and picked up a couple cans of Dupli Color spray paints I used to prime/paint. Sprayed 2 light coats then a heavy third/final coat. So far it’s looking good to my eyes and paint doesn’t seem to be doing anything funky yet.... 1 Quote Link to comment Share on other sites More sharing options...
seabiscut88 Posted April 6, 2021 Author Share Posted April 6, 2021 Just added a coat of clear and is looking nice and smooth! Excited to get this project going again 1 Quote Link to comment Share on other sites More sharing options...
Curt Posted April 6, 2021 Share Posted April 6, 2021 Looking good! Quote Link to comment Share on other sites More sharing options...
bisc63 Posted April 7, 2021 Share Posted April 7, 2021 That's WAY better, and a nice red to boot! Quote Link to comment Share on other sites More sharing options...
espo Posted April 7, 2021 Share Posted April 7, 2021 Your second paint job looks so much better. Quote Link to comment Share on other sites More sharing options...
seabiscut88 Posted September 13, 2021 Author Share Posted September 13, 2021 Well after several months of work and life in the way… luckily last week had some life settle down again and could do a little painting and putting it together. Trying not to rush as being off the project so long want to get onto something new but overall compared to my previous 8-9 builds this is coming along nicer than I expected 1 Quote Link to comment Share on other sites More sharing options...
Zippi Posted September 14, 2021 Share Posted September 14, 2021 Nice looking red on the second time around. Everything is looking nice so far. Quote Link to comment Share on other sites More sharing options...
slusher Posted September 16, 2021 Share Posted September 16, 2021 Nice paint looks good.. Quote Link to comment Share on other sites More sharing options...
Pierre_tec Posted September 19, 2021 Share Posted September 19, 2021 Much better the Second time, lesson learned I with rust oleum paint, now with dupli color seem to work fine with models and their clear is greait Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.