geetee66 Posted January 30, 2015 Share Posted January 30, 2015 (edited) I bought this a while ago, but I've only just got around to building it. I liked the look of the lace decals, even though the lace is a tad out-of-scale. Gold and purple always go well together, so I used purple candy over a silver base. The horrible kit wheels were replaced with some from a Polar Lights funny car. Now, I've heard it said that this kit has one of the worst Ford SOHC engines in 1/25, so I decided to pep it up a bit. I added resin pulley wheels, intake, oil filter and gear linkage. I also added a Mallory ignition module and rear disc brakes. The engine had no magneto, so I made one that looks kinda like a Vertex. A Detail Master 5-point harness and a fire extinguisher were added to the interior. I had to lift the pickup bed a bit to stop the rear arches rubbing the tyres. A note to anyone who plans to build this kit...The front axle is set too far back. The rear edges of the tyres would foul on the bodywork. I know some guys re-position the leaf springs, but I'd already painted the chassis and installed the axle before I realized my error. Luckily, I'd only fixed the front axle on with CA glue, so it came apart easily and I was able to fit it in a better position with epoxy. The kit decals were dead tricky. They seemed to stick fast, on contact with the paint. I managed to get them all on, but it was a sweaty hour. 'nuff blurb.. Here are the pics: Comments appreciated Hope you like it Thanks for looking Edited January 30, 2015 by geetee66 Quote Link to comment Share on other sites More sharing options...
Guest Posted January 31, 2015 Share Posted January 31, 2015 That's one of the nicest builds of that kit I've seen yet! I passed on this kit because I remembered how fiddly those old Revell kits can be. I may have to buy one and give it a go. Well done! Quote Link to comment Share on other sites More sharing options...
jeffs396 Posted January 31, 2015 Share Posted January 31, 2015 Great build quality! Quote Link to comment Share on other sites More sharing options...
DeeCee Posted January 31, 2015 Share Posted January 31, 2015 Very nicely done mate, some good engine details too. Quote Link to comment Share on other sites More sharing options...
Prince Ital Mike Posted January 31, 2015 Share Posted January 31, 2015 Very nice!!! Quote Link to comment Share on other sites More sharing options...
Helix Posted February 1, 2015 Share Posted February 1, 2015 Nicely done! Quote Link to comment Share on other sites More sharing options...
DaveM Posted February 4, 2015 Share Posted February 4, 2015 Those older Revells can be quite a trick to build. That is a great job, and a really nice looking model. You show a few basic details, plus a lot of patience and great building and painting skills can really wake up a model. I have the original Moving Violation version from the '70s minus a rear fender (Probably lost when the kit was first opened.) I am thinking of grabbing this one just for the decals after seeing your build. Those front fenders look like they were a beast to fit the decals onto. Again, great looking build of a tough old kit. Quote Link to comment Share on other sites More sharing options...
Danno Posted February 5, 2015 Share Posted February 5, 2015 Bitchin'!! Quote Link to comment Share on other sites More sharing options...
geetee66 Posted February 5, 2015 Author Share Posted February 5, 2015 Thanks guys It was a bit fiddly at times and I wonder if I should've used the other front axle in the kit. It had working steering and wasn't dropped like the chrome one I used. It would've given a more nosebleed stance. The door hinges took some adjustment and wire pins, to get them working properly. Yes Dave, the decals on the front fenders were quite difficult. Once they made contact with the paint, they didn't want to move. I had to lift them off with a fine wet paintbrush and try again. And again. It was a tense moment, but they lay down fairly well with a bit of Microsol. Considering the copyright logo says 1961, It's a pretty good kit. I look at it every time I walk past it Quote Link to comment Share on other sites More sharing options...
unclescott58 Posted February 24, 2016 Share Posted February 24, 2016 Very nice. I like it. Been thinking about picking with kit up myself. Quote Link to comment Share on other sites More sharing options...
Davewilly Posted February 24, 2016 Share Posted February 24, 2016 looks nice! I have this one on deck next to the work bench...to start when I finish the 2 I have going on it right now... Quote Link to comment Share on other sites More sharing options...
gatorincebu Posted February 25, 2016 Share Posted February 25, 2016 You did a jam up job on this kit. You paint and decals looks really good. The upgrades to the motor also look good.I like what you done here. Be Well Gator Quote Link to comment Share on other sites More sharing options...
Greg Pugh Posted February 25, 2016 Share Posted February 25, 2016 That's slick!! Nice job!! Quote Link to comment Share on other sites More sharing options...
vintagercr Posted March 1, 2016 Share Posted March 1, 2016 That sure is nice Quote Link to comment Share on other sites More sharing options...
Tyler62990 Posted March 3, 2016 Share Posted March 3, 2016 Beautiful build man Quote Link to comment Share on other sites More sharing options...
slusher Posted March 3, 2016 Share Posted March 3, 2016 Excellent build.. Quote Link to comment Share on other sites More sharing options...
Ridgeback Posted March 6, 2016 Share Posted March 6, 2016 Love this! You've made a poor kit into something exceptional. Great work. Quote Link to comment Share on other sites More sharing options...
DumpyDan Posted March 9, 2016 Share Posted March 9, 2016 Well done and so cool Quote Link to comment Share on other sites More sharing options...
Daddyfink Posted March 10, 2016 Share Posted March 10, 2016 Very nice build! Now why can't Revell change the wheels in this kit considering how much nicer it looks with vintage wheels. Quote Link to comment Share on other sites More sharing options...
gtx6970 Posted March 16, 2016 Share Posted March 16, 2016 I LIKE IT , I LIKE IT A LOTI've been wanting one of these strictly because I think the lace decals are cool Quote Link to comment Share on other sites More sharing options...
unclescott58 Posted March 18, 2016 Share Posted March 18, 2016 Bought one. How does one get the rear suspension right? To sit high enough so the wheels don't rub the fenders. An odd design/set up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.