Jump to content
Model Cars Magazine Forum

ChrisBcritter

Members
 View Profile  See their activity

  • Posts

    7,088

  • Joined

  • Last visited

 Content Type 

Everything posted by ChrisBcritter

  1. ChrisBcritter
    OK, just finished doing the rest of the '58 Ford trim for the driver's side of the Plymouth and snapped a quick shot of it laid out for position. Of course some adjustments will be made to fit the overall length and the new cut line for the door (changing it to a two-door sedan). I decided to keep the ribbed insert as well.
  2. ChrisBcritter
    Not phone books, but Classmates (.com) has thousands of yearbooks online; many of them have ads in the back like this one (from Libertyville, IL): So look up some old West Virginia yearbooks and you might find some good stuff.
  3. ChrisBcritter
    Toyota effing Echo. It just plain depresses me to look at that thing. (However good it may be otherwise.)
  4. ChrisBcritter
    That may be a problem, Peter - IIRC, the body is painted with metalflake at the factory over a solid color plastic; if you dunk it in the purple pond everything might come off. Maybe if you sealed off the rest of the body by covering it with rubber cement and put it in a shallow tray of stripper (just enough to immerse the roof), or used a few drops of brake fluid at a time? Anyone else have an idea?
  5. ChrisBcritter
    Here's a good one. The 1954 Mexican film Yo No Creo en los Hombres was filmed on location in and around Havana, Cuba. This scene was shot in front of a very eclectic dealer... Packard: Hillman (on the left): Mack trucks (sign on the wall): And just for good measure, Sikorsky helicopters!
  6. ChrisBcritter
    Aw, man... you lucky dog. I'd better check my local store; last I looked the ones on special (for $2.99 instead of $5.99) were all shades of pink!
  7. ChrisBcritter
    Hi Christian - I really like this '59 Ford truck and trailer! Is it die cast? What scale and manufacturer? Never saw one like it before.
  8. ChrisBcritter
    I've been using the Tamiya PE blades for a while; you do have to be careful not to put too much pressure on them because they will bend (although they can be straightened pretty well). To me they're indispensible for fine work; I've removed well-glued windshields without damaging the trim.
  9. ChrisBcritter
    To expand on this, as I posted in the Tips section: The interior bucket is a modified '64 Dodge promo interior; the '62 Plymouth uses the '64 Plymouth promo interior. The package shelf was altered to fit the more rounded back window, and a small piecut wedge was added on the side panels where the dashboard mounts. Both are not too hard to fix. Good news if you want to do a correct bench seat '64, bad news if you want to do a correct '62. http://www.modelcarsmag.com/forums/topic/107174-stock-64-dodge-polara-interior-non-500-update/
  10. ChrisBcritter
    I'm starting to get more serious about detailing as a personal challenge; never got much into engine detailing but that will be next. I've been doing little improvements to the one-piece chassis on my '61 Comet, and cut up the interior on the '60 Chrysler to deepen it and redo the seats, then add custom upholstery, cranks and handles. Carving all those little parts is what I seem to like best, along with repairing old builtups (spent last night redoing the windshield frame of the '59 Edsel, drilling tiny holes and making tiny reinforcement pins to fix the split and take the sag out). Still, engines don't excite me that much, but I'll get there eventually.
  11. ChrisBcritter
    Oh yeah... the guys who made the Panzernest.
  12. ChrisBcritter
    Got a real nice set of bumpers for the '59 Edsel - thanks Larry Ray! Also fixed the damaged quarter panel and screw pillar, and sent a polite email to the seller. And my DVD is still in San Juan. Maybe they're having the Flying Nun bring it by airmail.
  13. ChrisBcritter
    A perfect match:
  14. ChrisBcritter
    That's true; I'll take it downstairs later and try to get it to pop out (at least the crack didn't go into the emblem). (Hey - remember the DVD I mentioned? It's just now been located. Turns out the USPS must have wanted it to have a nice tropical vacation on the way - it spent the last four days in Puerto Rico! )
  15. ChrisBcritter
    I am going to discuss this with the seller. Odd thing is the box appears to have no damage at all - maybe it was dropped and landed flat, but... In the end, however, I have a non-gluebomb '59 Edsel for $20 and change (and a parts trade for the bumpers) and it still doesn't need anywhere near the amount of work many of my other cars, that cost more, did. In other words, I got a screaming deal but now it doesn't scream as loud.
  16. ChrisBcritter
    The chassis is sort of half-and-half - the front wheel drive and suspension setup is pretty nicely done but the rear axle and mufflers are molded in. The wheelcovers are the same as on their '70 Coupe deVille and are wrong for the Eldo, besides being too flat (this was a problem nearly all JoHan wheelcovers had). The centers stand out because of the offset wheels used with FWD.
  17. ChrisBcritter
    The '59 Edsel arrived today: Thanks for the damages, USPS! (Maybe the seller could have padded it more, but I've gotten plenty of stuff mailed to me with less padding and no damage. Plus they also lost a $15.00 DVD I was supposed to get last Saturday; they're "investigating" it...)
  18. ChrisBcritter
    I saw their infomercial which makes it look like you get twice as much for the price, and then read a lot of online complaints about the ordering process. Caveat emptor 'n all that.
  19. ChrisBcritter
    As if Motorifics weren't expensive enough...
  20. ChrisBcritter
    I thought so; I've been there and I remember those buildings from Touch of Evil.
  21. ChrisBcritter
    From the hardware department at Swillmart - "Where Quality Is A Slogan"! Edit: Actually the Lampoon Newspaper's ad was for Lumberland:
  22. ChrisBcritter
    (not Steve, but...) Even better - a rubber band! I built one according to the instructions (it has ball bearings that need to be lubed with Vaseline) for the Car Craft Dream Rod, which spun right off. Maybe with a heavier model it would work...?
  23. ChrisBcritter
    Thanks for the tip - although I already worked out a trade with Larry Ray for the bumpers. Congrats on getting the '65 Dodge! (Has anyone ever gotten one of those rotating display stands to work properly?)
  24. ChrisBcritter
    Beautiful job, Tulio! Always liked the '56 in black. Did the doors give you any trouble? And will you try a glasstop Crown Vic next?
  25. ChrisBcritter
    Interesting how much is original: chassis is there, engine and underhood accessories are there, dash and steering wheel and at least part of the interior as well. Note the odd "T" shape of the chrome tree - like maybe the stock bumpers/grille may be blocked off. If the molds turn up this may be a case like the AMT '65 Cutlass - so close and yet so far.
×
×
  • Create New...