Jump to content
Model Cars Magazine Forum

Texas_3D_Customs

Vendor
  • Posts

    669
  • Joined

  • Last visited

Everything posted by Texas_3D_Customs

  1. The existing W series are 1:25, but that is based on the donor chassis being 1:25 if the desired donor is 1:24 then that will be what its made in, but that makes possible complications that I will have to deal with. If the cab in that scale 1:24, while the two are very close the 1:25 W is pushing the boundaries of my large printer it may need to be printed on my Huge resin printer and the price will be different, not much but its a cost issue.
  2. So this is pretty classic looking, but no I don't sell them individually
  3. So that's just embarrassing shipping on supports doesn't really do much proper packing on the other hand that's a different story altogether I have shipped a lot of semi-kits and not a single one of them has been broken yet All depends on what material you're using looking at that resin and yeah that looks like a cheap standard stuff and then how you pack it It's pretty simple but for a seller just to tell you to glue it that's pretty lowdown sometimes things get broke and it is inevitable I've had people say I'll just glue it and I said are you sure I'll ship you a new one but as far as scale sometimes it's hard to do You need to have really good measurements but something like a brake booster Just go out to your car and measure one can at least get close
  4. CA AKA super glue. But honestly that is like the longest I think I can print them I mean I could maybe make them half an inch longer but not without buying a really expensive printer can I get much bigger than that or a big one that doesn't print as well
  5. So 380 mm is about as long as I can print I can't justify buying a printer just to make these rails unless you want to order about $1,500 worth of them
  6. I completely put this in the wrong place I meant to put this in the resin printed section I apologize someone wants to delete this thread I understand this is not where it goes but 11mm tall 3.5mm wide
  7. So Scott worked these up in CAD and I am printing them. Not the hardest design or print to be honest, well the print is kinda easy now that I spent like a week trying to remember how to print in Filament, either way they are available in 320mm and 335mm lengths on my website at https://tx3dcustoms.com/products/extended-semi-frame-rails
  8. Oh I can make them thinner You have to talk to Scott about that has nothing to straightness it's just how he model it and generally speaking I trust his judgment away more than I trust my own when it comes to semis ?
  9. So who wants some mad max styling. Listed on my Page
  10. I agree I just was shocked
  11. Man shapeways has lost their mind $12 for shipping by the time you buy a set of those wheels You're at $30 I am shocked to be honest
  12. Three new products https://tx3dcustoms.com/products/blown-carbed-ford-fe https://tx3dcustoms.com/products/blown-hilborn-ford-fe https://tx3dcustoms.com/products/trapazoidal-scoop-and-filter
  13. This is the version I will be listing it is two pieces the filter and the scoop are two separate pieces and while I know the filter is not properly shaped and you'll understand when you see the pictures of the parts it makes it fit all together well
  14. I just designed it after you asked
  15. I am not sure how I feel about this
  16. Heres what I worked up
  17. So there are a couple issues there One that's extremely thin which extremely thin and resin prints usually means extremely hard to make without falling apart The other problem is there's an air filter inside there and people notoriously love to complain at me about the air filters inside my scoop for my 572 so you try to print an air filter that you can insert into the scoop or make the scoop where just kind of sits on top on a very thin ledge on the carburetor but the air filter can still fit through It's not really ideal making things in sheet metal for a car is a lot different than 3D printing. Now I could probably make something that resembles that that was two pieces but I'm not going to sell it with an engine If I do it it'll be a separate item and generally speaking separate items It's kind of a lose lose situation either I charge a lot to kind of make up for making these little fiddly parts for one off orders or I spent a lot of time making something that gets me no profit and I know it's not all about profit but this is not my side hustle that's just for fun anymore. That is one of the bad things about quitting my job and doing this as my income now.
  18. Best way to remove supports is directly after washing it removing supports before the cure process will keep them a little more pliable so if you remove them just after washing a break off nice and clean
  19. Sorry I didn't mention it but it's released
  20. So was going through my FE engine doing a favor for someone and I realized I never fully completed my Blown Setup, I mean it was close really close, so I finished it off and am printing a small batch of both variants now. Transmission is selectable I am talking about the hats more than anything on the variation.
  21. Sorry I don't see that in my future offerings.
  22. Both Daycab and Sleeper are listed on my website Semi Kits
  23. Motivational speech is not one of my products I offer
  24. The surfboard can be found at https://tx3dcustoms.com/products/modern-style-surfboard
×
×
  • Create New...