Exotics_Builder

Got a scratch on the roof from an accidental drop. So, stripping the body to repaint. I hate when that happens

There are three model kits available that replicate the 1965 Impala SS Coupe by Monogram, the 1968 Camaro Z/28 by AMT, and the 1970 Camaro Z/28 by AMT (my first 3 cars). These kits have remained on the shelves for years. The necessary parts to closely replicate these cars have been collected over time, with occasional adjustments being made. After completing the Revell 1969 Camaro Pace Car replica kit, I started building the 1965 Impala SS. My parents bought this Mist Blue Metallic car with a black interior and vinyl top in late 1964. It had a 327 cubic inch, 300 horsepower V8 engine with a Powerglide transmission. When I bought it from them, I added headrests and Firestone redline tires on Cragar SS front wheels and Chrome Reverse rear wheels due to budget constraints. To reflect my car accurately, the Monogram Coupe kit required modifications. I sourced a 327 small block with Powerglide and ram horn exhaust manifolds from the Revell 1964 Impala kit. Additionally, I needed a different accessory drive for power steering, as the Revell small block only had an alternator. The model came with air conditioning and power windows, which I did not have. So, I adjusted the firewall configuration and removed the dashboard A/C vents and replaced the power window switches with 3D-printed window cranks. I modified the manual transmission console to fit an automatic. For the vinyl roof, I added molding using Evergreen strip and prepped the body before applying Scale Finishes Mist Blue Metallic. Still a bit of work to go. I need to finish off the interior with Seat Belts and decals. I was fortunate to get a Last Detail decal set for the 65/67 Chevrolet Impalas. And I have a Model Car Garage PE set for the build. The engine is in the process of assembly. Paint needs completing along with the vinyl top and detailing needs to get under way. More progress pics on the way. The first photo is the car with my dad and my brother’s fiancé standing in front of it. That is the only photo I have yet to find of it. These were on slides, and many were lost over the years. The next 3 photos are of progress to date. More to come later.

Modifications: 3D printed Diolex wheels were cleaned, primered, drilled for air valves, and sprayed with Revell Chrome. The air valves were added after drying. Tires were sourced from my parts bin. Missing body-to-chassis bolts were installed using a pattern, with holes drilled, and Calibre 35 resin bolts used. The engine was assembled with additional wiring. Subsequently, a Replicas and Miniatures of Maryland 4-cylinder hop-up kit with downdraft Weber carburetors, fuel lines, and linkages was installed. Replicas and Miniatures finned brake drums were fitted and adapted for the wheels. Drum brakes were chosen instead of disk brakes to better align with the period of the vehicle. Although I am not particularly satisfied with the straight rod simulating the drive axles (without boots), I decided to leave it as is. The dashboard was detailed with instrument decals, Wizard O trim rings, and clear coat to simulate plastic covers. Additionally, a control knob and key lock for ignition were added. Different front seats from the parts bin were installed along with Gofer Racing stock-type seat belt hardware for both the front and back. Paper adhesive bandage tape was applied to the lower body to simulate the rough fiberglass texture of the actual car. Created rear MANX and front Shield emblem decals from no royalty vector image file of logos. Painted Testors Flaming Orange covered with 2 coats Tamiya Pearl Clear and finished with Testor Wet Look Clear. Mr. Hobby Black Primer was daubed onto the lower body to add more texture to the paper tape.

This is the Revell Escalade Ute. It may be a good alternative as well since on the truck chassis. But I'd need to research further

I have a stack of LS's in my parts boxes. Would love to get close to replicate this one I saw at Car Show last year

I do not yet know. I have a 3D print Duramax in the box or could use an LS. If I do curbside (easiest option by far) only the bottom half of the engine would be visible anyway. Here is the chassis/suspension the designer Andrey Bezrodny includes.

When I get to it. I've gotten the 3D printed kit from Andy Lesiak. It is curbside and I'm not sure it will be worth the effort to put in an engine bay. But the chassis/suspension with these prints (not Andy's fault it is what the 3D designer did) is not prototypical. I would like to be a bit closer to the actual vehicle with my model. The quality of Andy's prints is exceptional.

I intend to use as a base for a 2023 GMC 1500 Sierra Denali. Close, but needing work. The other kit I need to pull out and check is the Revell Escalade SUV (even though curbside).

Well, I'd toss the engine as it is not, in my opinion, very good. But the basics appear to be there.

Haven't checked this out in detail, but would not the AMT Cadillac Escalade Pickup be a better starting point? https://www.scalemates.com/products/img/6/0/0/1410600-63-instructions.pdf

Just this one as far as I know. Sitting in the stash, unbuilt.

Even though an MPC 69 Camaro (optional engine in some kits) and the 1969 Firebird, I got my engine a few years back from Replicas and Miniatures of Maryland. MCW Finishes appears to offer one. You might give it a try https://mcwfinishes.com/shop/ols/products/pontiac-ohc-6-cyl-motor-125-scale Here's mt Replica and Miniature version. The Model Car Garage PE Set has the Sprint hood script.

Well, these are what are respectively in original 63 Bonneville Convertible, 64 Tempest Convertible, and 65 GTO. My 64 Grand Prix kit does not ave anything like that and my 65 Bonneville and Grand Prix Prestige kits do not as well

Well, it may be as stated. But, I'm looking at a photo of an LS with a similar "bauble" and it looks more like the accumulator/dryer can for the A/C system

Nothing on the box or instructions

I'll check the two I have downstairs later today.

Well, the set from the Coupster parts kit is on its it way to him. Spoke about my concerns. Hope it lasts.

Yes TS-92 Metallic Orange and TS-75 Champagne Gold

Doh!!! Still hadn't had all my morning coffee when I read that.

Just arrived from the Postman

I'm putting the set from the Coupster in your Midnite Cowboy box now and taking it to the PO for mailing in about two hours. Look for it separately in the box.

The tires are not as small in diameter as compared to the wheels when you bring them loser. In the box, they looked a bit smaller. The centers of the tires need careful trimming from the cloddy center tab. They are not the greatest in tread and look. I still would recommend using something else, but here is what they are

Looking at the tires in the Coupster kit, I think they were originally the same as the Vantastic. And the tires in the box are smaller than the rim and look like street tires. I think, over time, they would split off as they aged. I think it is the material used in the tires. I have a bunch of tires in my stash and can check them against the kit wheels to see what might work. If I were building any of these kits, I definitely would not use the included tires. You're showing SATCO. Are they still in business? I thought they shut down years ago. I bought quite a few aftermarket tires from them.

Are these IMSA or Challenge cars? Or?

I checked the Coupster kit, and the tires are smaller than the rims which means they would be stretched out to go over the rim. The Coupster is a parts kit and I did not get a chance to mail off the Midnite Cowboy today. I could open the box and put the tires inside with the Cowboy kit if you would like? I'll then get it mailed tomorrow.