carsntrucks4you

This is a Nissan Gloria (A30/A130), 1967–1971. The correct answer were sent in by: Matt Bacon thatz4u Mittagskind otherunicorn DonW Ace-Garageguy Richard Bartrop Thom Fabrux Congratulations

Next I'll start scan some parts and then print them. I got today my Revopoint POP2 3d scanner

Today I received my Revopoint POP2 3d scanner.

Lets solve this quiz. It is a bit tricky because it is a truck from Germany that was manufactured in Cologne Ford-Plant from 1940 - 1951. The truck is based on the US Model 08T from 1940. Ford had built trucks in Cologne/Germany since 1932. During the war they were named B3000 (4 cyl.) , V3000S or V3000A (both with V8) . The first Ford that had left the Cologne plant after the war was a Ford V3000 . British armed forced had taken over the plant and had started production for their use and for reconstruction of the destroyed city of Cologne. During this time body parts were pressed at the VW plant which was also under British military administration in Wolfsburg and shipped over to Cologne. In 1948 the V3000 was renamed to Rhein while the B3000 was renamed to Ruhr. With this in mind it is wasn't easy for you to get the correct type of this truck. At the start of production the B3000 and V3000 looks like the American counter parts. Due to material limitations during the war the trucks got so called Einheitsfahrerhaus (squarish wooden cab) and Einheitskotflügel (simple round fenders). There was no difference in styling between the 4 cylinder and V8 models before and after the war. So again hard to tell what kind of truck it is. This particular truck is a 1948 Ford Ruhr it has a 4 Cylinder 3.2l 52 hp engine. Loading capacity is 1.5ton With this in mind an answer that says V3000 or Ford Rhein or Ford Ruhr was accepted. Any answers that contains beside year and Ford name plate only the GGW weren't correct, sorry. ChrisR otherunicorn Richard Bartrop mittagskind

? Again I',m too late. The answer on this quiz is 1953 Hotchkiss Grégoire. Sometimes I'm asking myself what the designer though when he did the first sketches of a car. That is my personal opinon. This car looks outof proportion, but that is a personal comment. The correct answer were sent in by: Matt Bacon Mittagskind Richard Bartrop Ace-Garageguy otherunicorn thatz4u DonW Congratulation

It is a bit quiet out there. I'll give you a hint. The company was known for der cars and later for their trucks. The company was shut down in 1994.

This car was the result of sharing ideas of build a new car. Bill Miller and Raffi Minasain liked the look of classic 60’s sports cars so we decided on a car with a familiar but fresh “look”. Retro before retro was “in”. theme became “what if Pegaso had built a car to compete with the very first super cars – the Ferrari Daytona and Lamborghini Miura.” Based on a Porsche 914 (not much was left over) and powered by a Buick V8. It is named Pegaso American Dual Turbo build in 1983. The correct answer were sent in by: Ace-Garageguy Mittagskind otherunicorn thatz4u Congratulation

I think more than glueing the walls to the frame

No thats ok for me. The only drawback was that I have to print the rear roof section again because it broke while cleaning.

For my Peterbilt 280 COE I need a van trailer. I had started with designing the trailer chassis based on an old Corbitt 24ft trailer chassis. The chassis was printed in 2 sections, a 35ft 2 axle chassis was also printed. Pictures of prints shows the first 3 section 24ft trailer prototype. For the side walls I used evergreen sheets. The round front was formed with hot water and a hot fan over a printed front section that was way to heavy for the printed frame. The roof section is also 3D printed. Print jobs where done on a Anycubic Mono X

This car is "The First Personal car from Ford of Great Britain" the Ford Consul Capri. Build from 1962 - 1964. This is one of the rare LHD cars- Overall the car was very expensive to produce and in the latter part of its production was running alongside the very popular Ford Cortina. Sales were disappointing and the Consul Capri was removed from sale after two and a half years with 19,421 sold, of which 2002 were GT models. 1007 cars were sold in 1964, the last year of production, 412 of them being GTs. The Consul Capri was discontinued in July 1964. The Consul Capri (335) is one of the rarest cars from Ford of Great Britain. The correct answer were sent in by: Mittagskind Ace-Garageguy Bainford Matt Bacon otherunicorn Richard Bartrop ChrisR Fabrux DonW stitchdup Earl Marischall thatz4u Congratulations

This weeks quiz will contiune until june 18. I was on vacation until today

After my vacation here is result ofthe last quiz. It is a 1937 Mack Jr. . In the 30's mack wants to enter the small commercial business with a pickup that was build by Reo. They are Reo trucks with Mack badging. From 1937 these trucks got their own wheels, new hood and grilles. The correct answer were sent in by: Bainford thatz4u Richard Bartrop Ace-Garageguy Raoul Ross otherunicorn Fabrux Congratulations

1988 TVR „White Elephant „ The White Elephant is a one-off 1988 TVR prototype - the only TVR ever to be powered by an Australian 5 litre V8 Holden Bathurst race engine The correct answer were sent in by: Ace-Garageguy thatz4u othetunicorn DonW Congratulations

I had tried several times Revell Germany acryl paints and these are worse. The result after painting is not compareable to Tamiya or zero piants. The enamel paints are ok.. Since I had switched to Zero paints and Tamiya I'm happy.

I not a fan of Revell paint products, most of these products a junk. But this chrome spray is very good, except for its price. This gives the best chrome effect in scale modeling. Like the other chrome paints you can't clear coat it and you have to be very careful when you grab the parts. you can rub it of or it dulls when touched.

This car is a 1955 Pegaso Z-102 Berlinetta Panoramica by Touring, chassis no. 0102 153 0128. Only 8 build out of 86 Z-102. The Z-102 was build from 1951 - 1958. This car was on display at the 2023 Techno Classis in Essen/Germany The correct answer wer sent in by: thatz4u Richard Bartrop Ace-Garagguy Bainford otherunicorn Matt Bacon DonW blunc Congratulations

Sorry can't change the Topic to finished. I'm well but I was to lazy and had other things to do.

This time it took a bit longer to finish this quiz. This kind of car is called a utility or ute as the Aussie say.It is a Holden HSV Maloo R8 with out the rear spoiler. It wasn't easy idendify which series of Maloo it is. Is it a VU (2001-2002) or a Y (2002-2004) or a Z (2004-2007). After a close inspection of the front spoiler and head lights it can't be a a VU or a Y so we end up with a Z-Series. the correct answer were sent in by Chris R Ace-Garageguy thatz4u The following members said it is Holden Maloo 2004-2006 get a recommended Otherunicorn gbtr6 Congratulaitons to all of you

This car was designed by Giugiaro for ItalDesign. The base was a VW/Porsche 914/6. It was first shown to the public in 1970 at the Turin Motor Show. The car is named Porsche Tapiro Concept (1970), The correct answer were sent in by: thatz4u Richard Bartrop Ace-Garageguy Matt Bacon otherunicorn DonW gbtr6 Congratulations

You mean this one? This is cab from Strato Models

Parts used: A&N Model Trucks: Kenworth W990 Daycab Kenworth W990 Daycab chassis Cummins engine AG690 tri-drive suspension Aussie style wide front rims Aussie stlye rims Wide tires heavy duty tread Rear tires heavy duty tread PapyHobby: 4 axle log trailer (Deloupe) Headache rack Plaskit: Trailer air ride suspension Air ride truck suspension 3D printed: Stacks Bunks For this project I get out an old PapyHobby 4 axle Logtrailer that I bought a few years ago. This is one of the worst kits that I ever bought. The trailer frame rails, bunks and stacks are FDM printed and this results in a quality that is to rough for 1725 scale in my opinion. The level of detailing and accuracy is very low.Not only that the quality of the kit is bad the suspension of that is include was incomplete, which means parts were missing. That was the reason why I put this it close to the garbage bin to through it away. But I didn't. With the release of the A&N Model Trucks Kenworth W990 day cab I got this kit out again. The anger was gone. I had printed new stacks and bunks on my SLA printer which is more accurate and in better quality. Got some trailer suspensions from Plastkit and now it is getting better and better. The Kenworth is as usual from A&N excellent in quality, part fitment and accuracy The first time I solder the chassis rails and crossmembers.

Sorry Sorry Sorry Ace-garageguy has also sent in the correct answer. I can't edit the original posting anymore.

This is 1 1969 - 1975 Fiat 128 Moretti Roadster Parallel to the introduction of the Fiat 128 Moretti release on the Fiat 128 based Targa coupe. There were no changes to to the running compare with the conventional Fiat 128. In 1970 Moretti released a Coupe without Targa roof. This car on the picture is a 1972 model. The correct answer were sent in by: otherunicorn thatz4u gbtr6 Ace-Garageguy Congratulation

What's up guys? Is this quiz to tough, to difficult? Do you know only cars in a 3/4 view. I'm wait for suggestions. The taillight was installed on car that was during that time know for there Luxurious cars. Lat the name of the manufacturer was used a car name