RestoModGuy Posted July 3, 2017 Share Posted July 3, 2017 (edited) I love the new Corvette C7 with only a few things I don't like, like the odd non-Vette taillights, do not like them, but I'll accept them. Looking at the new Grand Sport Editions released earlier this year, one is especially special, the Heritage Edition. A reverse color combo, white body, blue stripe and red fender hashmarks. I'm in love with this color combo, so here I am building one from the Revell Snaptite 2014 Corvette. The Grand Sport (GS) and Z06 have a few body differences from the stock Vette. One is the rear wells are flared 4-inches for wider tires and the rocker-air-ducts located in front of the flares. Also different is the side vents have a unique trim design for GS and different for Z06. First had to cut out the stock wheel well edges to maintain the marker lights, fairly easy to do and added the air-ducts detail Next to replicate the side vent GS design Body work done, shot the paint, ready to clear next... Looking pretty close so far... Edited July 31, 2017 by RestoModGuy update Quote Link to comment Share on other sites More sharing options...
afx Posted July 3, 2017 Share Posted July 3, 2017 Nice work. Quote Link to comment Share on other sites More sharing options...
Len Woodruff Posted July 3, 2017 Share Posted July 3, 2017 Great start. Keep it up and us posted. Quote Link to comment Share on other sites More sharing options...
maltsr Posted July 3, 2017 Share Posted July 3, 2017 Excellent! Quote Link to comment Share on other sites More sharing options...
#1Volsfan Posted July 4, 2017 Share Posted July 4, 2017 Wow!!! That's excellent work you did on the fenders and the paint. I also like the reverse color combo on the c7. Also are those the kit wheels you have blacked out? Can't wait to see this one finished! Quote Link to comment Share on other sites More sharing options...
aurfalien Posted July 4, 2017 Share Posted July 4, 2017 Hi,This is a HOT build. I love it! Quote Link to comment Share on other sites More sharing options...
superbike-shaun Posted July 4, 2017 Share Posted July 4, 2017 Great work,,,when i looked @ the in progress,i was sceptical you pulled of this very special edition! Quote Link to comment Share on other sites More sharing options...
EL LOCO Posted July 4, 2017 Share Posted July 4, 2017 Love the body mods. Nice work. Looking forward to the end result. Quote Link to comment Share on other sites More sharing options...
Len Woodruff Posted July 4, 2017 Share Posted July 4, 2017 The paint looks great. What colors/brand did you use? Quote Link to comment Share on other sites More sharing options...
Rocking Rodney Rat Posted July 4, 2017 Share Posted July 4, 2017 I like it. Nice work on the body mods... -RRR Quote Link to comment Share on other sites More sharing options...
MrObsessive Posted July 4, 2017 Share Posted July 4, 2017 Excellent work on those rear fender flares! That's a clever idea to cut out the side marker lights first, and then fair them back in to keep the original shape. I'll be watching this one! I still haven't quite warmed up to the latest 'Vette even though it's a very nice car. Something about it seems off, and I think it's the loss of the round taillights as you mentioned. I can almost bet that they'll be round again someday! Quote Link to comment Share on other sites More sharing options...
Zoom Zoom Posted July 4, 2017 Share Posted July 4, 2017 Bodywork looks great; love the Grand Sport.Did you know that Plamoz makes the correct wheels for it? They're "Cup" wheels that they made for the C6, but they're appropriate for the C7 as well. Your model is coming along so well I think it's worth the expense. I've used Plamoz wheels, no problem ordering from them and great quality.Corvette Cup/Grand Sport wheels Quote Link to comment Share on other sites More sharing options...
Len Woodruff Posted July 4, 2017 Share Posted July 4, 2017 Bob what do you recommend for tires on these wheels? Bodywork looks great; love the Grand Sport.Did you know that Plamoz makes the correct wheels for it? They're "Cup" wheels that they made for the C6, but they're appropriate for the C7 as well. Your model is coming along so well I think it's worth the expense. I've used Plamoz wheels, no problem ordering from them and great quality.Corvette Cup/Grand Sport wheels Quote Link to comment Share on other sites More sharing options...
Zoom Zoom Posted July 4, 2017 Share Posted July 4, 2017 Bob what do you recommend for tires on these wheels? The kit tires. BUT...cut off the oversized diecast-like "paddles" around the rim intended to hold the tire in place. If you try to take a tire off, guess what happens to those thin resin spokes? Yet one more reason I dislike the "diecastification" of our plastic kits. You might also want to wrap some thin tape around the rim so that the tread area doesn't go hollow when installed.Maisto is supposed to have a 1/24 Grand Sport coming, but all photos show it w/the Z06 wheels. Quote Link to comment Share on other sites More sharing options...
Len Woodruff Posted July 4, 2017 Share Posted July 4, 2017 Thanks for the info Bob. Quote Link to comment Share on other sites More sharing options...
RestoModGuy Posted July 5, 2017 Author Share Posted July 5, 2017 (edited) Bodywork looks great; love the Grand Sport. Did you know that Plamoz makes the correct wheels for it? They're "Cup" wheels that they made for the C6, but they're appropriate for the C7 as well. Your model is coming along so well I think it's worth the expense. I've used Plamoz wheels, no problem ordering from them and great quality. Corvette Cup/Grand Sport wheels Excellent, thanks for the link, had no idea these wheels were being made. I decided to order a set from Plamoz, thanks again Bob for the link, these wheels will be perfect for my build. Edited July 7, 2017 by RestoModGuy update Quote Link to comment Share on other sites More sharing options...
RestoModGuy Posted July 5, 2017 Author Share Posted July 5, 2017 (edited) Thanks for the nice comments, having fun with this build. Did a little more over the weekend, Polished the paint, some detail painting and worked on the wheels a bit. (Decided to not "create" my own wheels as in the picture and ordered proper GS style Cup Style wheels from Plamoz pictued above) the modified from stock fender vents to the GS, came out ok... A Corvette option is covers for the top rear fender vents, made my own and kinda like the look Made some Colorado vanity GRNDSPT plates Edited July 7, 2017 by RestoModGuy update Quote Link to comment Share on other sites More sharing options...
RestoModGuy Posted July 5, 2017 Author Share Posted July 5, 2017 The paint looks great. What colors/brand did you use? Thanks, it really has turned out nice, especially for a white paint job. I'm not a purist builder, so I just looked through what I had ready to spray, this started out as a simple tribute build. Paint is all Duplicolor - Polar Artic White - Electron Blue - Electric Red, lots of clear polished out. Quote Link to comment Share on other sites More sharing options...
Len Woodruff Posted July 5, 2017 Share Posted July 5, 2017 Thanks for that info Jim. Quote Link to comment Share on other sites More sharing options...
LOBBS Posted July 6, 2017 Share Posted July 6, 2017 Excellent work on the conversions necessary to bring the body up to Grand Sport/Z06 spec.Also thanks for the heads up on Plamoz. Several things in their inventory that I need for various Vette projects Quote Link to comment Share on other sites More sharing options...
Xx RUSTY xX Posted July 6, 2017 Share Posted July 6, 2017 That is amazing Quote Link to comment Share on other sites More sharing options...
kymdlr Posted July 9, 2017 Share Posted July 9, 2017 This is a beautiful build. Quote Link to comment Share on other sites More sharing options...
misterNNL Posted July 9, 2017 Share Posted July 9, 2017 Great body and paint work on this build.Thanks for sharing. Quote Link to comment Share on other sites More sharing options...
MeatMan Posted July 9, 2017 Share Posted July 9, 2017 Very nice! Quote Link to comment Share on other sites More sharing options...
RestoModGuy Posted July 9, 2017 Author Share Posted July 9, 2017 (edited) Thanks everyone for the nice comments. Worked on the interior, looking okay, so far... cut out the grab-handle on the side of the dash where it meets the console, and printed gauges Edited July 9, 2017 by RestoModGuy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.