oldnslow Posted February 9, 2018 Share Posted February 9, 2018 This option is new . Found this on pinterest in a 60 Plymouth wagon . . Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted February 9, 2018 Share Posted February 9, 2018 Hmmmmm.....somebody's engineering-logic-free attempt at what, exactly? Looks cool (maybe...if you really don't know anything about engines) but those manifold pipes with multiple up-and-over sharp turns play hell with keeping atomized fuel in suspension, make tuning more difficult, and introduce an additional level of unnecessary complexity if the valve cover needs to be removed. It would have been far wiser, if somebody just HAD to have really long manifold runners, to relocate the battery (if necessary) and put both carbs on THIS side. There's a logical REASON for a cross-ram on a V8: it provides for longer relatively STRAIGHT runners that otherwise wouldn't fit. This setup, on the other hand, is just me-too dorky. Quote Link to comment Share on other sites More sharing options...
Reegs Posted February 9, 2018 Share Posted February 9, 2018 1 hour ago, oldnslow said: This option is new . Found this on pinterest in a 60 Plymouth wagon . . Uhhhh, yeah, okay, I guess ... Quote Link to comment Share on other sites More sharing options...
espo Posted February 9, 2018 Share Posted February 9, 2018 In addition to the points made by Ace I think this may be a case of what used to be called "Over Carburation". IE. there is more fuel going to the engine than the engine can burn efficiently. This "Shade Tree Engineering" I think may be based on the engine option offered by Plymouth on their Valiant that was used in NASCAR's Compact Racing Series in the early sixties. The Chrysler Engineers designed a single four barrel Carburetor long Ram type Manifold. This placed a Carter AFB series Carburetor almost to the driver side inner fender. This was for their 225 cu in engine which was also offered at one time with an Aluminum Engine Block. I think I remember seeing this very car offered by a Dealer on E Bay some time ago. The Wagon was a pretty clean looking rig as I recall. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted February 9, 2018 Share Posted February 9, 2018 Here's a long-runner single 4-bbl manifold... ...and triple Webers. Much better solutions to the lotta-carb thing. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted February 9, 2018 Share Posted February 9, 2018 Here's a few more performance manifolds for the old slant-6. Quote Link to comment Share on other sites More sharing options...
Joe Handley Posted February 9, 2018 Share Posted February 9, 2018 Huh, the intake manifold on that turquiose engine kinda reminds me of the one for the '99/'00-'06 Jeep 4.0l I-6! Quote Link to comment Share on other sites More sharing options...
oldnslow Posted February 9, 2018 Author Share Posted February 9, 2018 Looks like he was copying the cross ram with 2 2 barrels just to make it interesting . It is for sale on e-bay , $29,000. Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted February 10, 2018 Share Posted February 10, 2018 The original Hyper-Pak from MOPAR Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted February 10, 2018 Share Posted February 10, 2018 and MOPAR stuffed it in there Quote Link to comment Share on other sites More sharing options...
espo Posted February 10, 2018 Share Posted February 10, 2018 45 minutes ago, Greg Myers said: The original Hyper-Pak from MOPAR 40 minutes ago, Greg Myers said: and MOPAR stuffed it in there That's the engine I was thinking of. For a Compact Economy Car in the early '60's these things would fly. Quote Link to comment Share on other sites More sharing options...
landman Posted February 16, 2018 Share Posted February 16, 2018 Any of that stuff offered in resin? Quote Link to comment Share on other sites More sharing options...
aurfalien Posted February 16, 2018 Share Posted February 16, 2018 10 minutes ago, landman said: Any of that stuff offered in resin? Hi, Ross Gibson made a 1/25 Slant 6 Hyper Pak. Last I saw, it was going for $30 somewhere... Quote Link to comment Share on other sites More sharing options...
Jantrix Posted February 16, 2018 Share Posted February 16, 2018 3 hours ago, aurfalien said: Hi, Ross Gibson made a 1/25 Slant 6 Hyper Pak. Last I saw, it was going for $30 somewhere... Looked for one in the usual places when I started my Willys, but there were none to be had. Quote Link to comment Share on other sites More sharing options...
aurfalien Posted February 16, 2018 Share Posted February 16, 2018 1 minute ago, Jantrix said: Looked for one in the usual places when I started my Willys, but there were none to be had. Hi, I just checked Model Roundup who had it last. I no longer see it but contact them. You could get lucky. Quote Link to comment Share on other sites More sharing options...
#1 model citizen Posted February 17, 2018 Share Posted February 17, 2018 (edited) The Revell '62 Dodge Lancer GT has a Hyper Pak intake manifold & 2 piece dual exhaust manifold, although there is no mention of it in the instructions. Oddly there is no carb or air cleaner for this set up. Edited February 17, 2018 by #1 model citizen Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted February 17, 2018 Share Posted February 17, 2018 When was the last time this kit was released ? Quote Link to comment Share on other sites More sharing options...
espo Posted February 17, 2018 Share Posted February 17, 2018 I would like to find a model of the early Lancer GT or the Valiant as long as it's a two door. Quote Link to comment Share on other sites More sharing options...
scottyguitar Posted February 19, 2018 Share Posted February 19, 2018 What caught my eye right off the bat was the air cleaners. They have Harley-Davidson twin cam air cleaner covers. I have a 08 Fatboy and it has the exact cover over the air cleaner. Quote Link to comment Share on other sites More sharing options...
#1 model citizen Posted February 19, 2018 Share Posted February 19, 2018 On 2/17/2018 at 9:27 AM, Greg Myers said: When was the last time this kit was released ? It was only issued once in 1962. I'd like to see it re-issued Quote Link to comment Share on other sites More sharing options...
#1 model citizen Posted February 19, 2018 Share Posted February 19, 2018 On 2/17/2018 at 1:20 PM, espo said: I would like to find a model of the early Lancer GT or the Valiant as long as it's a two door. The Lancer is a 4 door HT. Revell also produced '62 Valiant 4 door sedan. Both of these kits were issued in 2 versions, Metal-flake ( metal flakes in a milky clear plastic; the idea was to paint it on the underside) and a solid color plastic. My Lancer is molded in tan & the Valiant in what I will call sea-foam green. (I don't know if they were molded in different colors like the early JoHan kits.) SMP issued 2 door Valiants in '61 & '62 (and a '60 4 door). AMT produced '63-'65 Valiant 2 doors. All were issued as annuals. The SMP's were curb sides. AMT had 2 versions, one being a Jr Trophy series and likely came without engines. I don't remember if the "Senior" versions had engines. Some were issued as Styline kits. Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted February 19, 2018 Share Posted February 19, 2018 14 hours ago, #1 model citizen said: It was only issued once in 1962. I'd like to see it re-issued Good source for that manifold. Quote Link to comment Share on other sites More sharing options...
Can-Con Posted February 19, 2018 Share Posted February 19, 2018 On 16/02/2018 at 3:15 PM, aurfalien said: Hi, I just checked Model Roundup who had it last. I no longer see it but contact them. You could get lucky. IIRC, Ross Gibson passed away a few years ago. Like they say, if you see a resin product you want, get it then because you never know when it will disappear. Quote Link to comment Share on other sites More sharing options...
espo Posted February 20, 2018 Share Posted February 20, 2018 On 2/18/2018 at 8:30 PM, #1 model citizen said: The Lancer is a 4 door HT. Revell also produced '62 Valiant 4 door sedan. Both of these kits were issued in 2 versions, Metal-flake ( metal flakes in a milky clear plastic; the idea was to paint it on the underside) and a solid color plastic. My Lancer is molded in tan & the Valiant in what I will call sea-foam green. (I don't know if they were molded in different colors like the early JoHan kits.) SMP issued 2 door Valiants in '61 & '62 (and a '60 4 door). AMT produced '63-'65 Valiant 2 doors. All were issued as annuals. The SMP's were curb sides. AMT had 2 versions, one being a Jr Trophy series and likely came without engines. I don't remember if the "Senior" versions had engines. Some were issued as Styline kits. Thank you for the information. I had one of the AMT issued 4door Valiants that I built when new. The problem was when I went to strip the paint a few years ago the Plastic that AMT used at that time didn't react well with the Purple Pond and it turned to mush. I had no idea of all the alternative models out there, so I guess I'll have to keep looking. You mentioned the JoHan clear/metal flake issue and I had one of the Chryslers that I painted red on the inside. Less than desirable results there. Thanks again for the info. Quote Link to comment Share on other sites More sharing options...
#1 model citizen Posted February 21, 2018 Share Posted February 21, 2018 On 2/20/2018 at 8:31 AM, espo said: Thank you for the information. I had one of the AMT issued 4door Valiants that I built when new. The problem was when I went to strip the paint a few years ago the Plastic that AMT used at that time didn't react well with the Purple Pond and it turned to mush. I had no idea of all the alternative models out there, so I guess I'll have to keep looking. You mentioned the JoHan clear/metal flake issue and I had one of the Chryslers that I painted red on the inside. Less than desirable results there. Thanks again for the info. You're welcome. Just to clear 1 point up; the clear metal flake bodies were produced by Revell. They were made with the same tool as the solid color plastic kits. Could it be the model you tried stripping was a promo made from a different type of plastic? While my experience with stripping early AMT models is limited, I've never had any issues.(mostly small parts) I have stripped a '56 issue Revell model recently and let it sit for days with no problems. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.