bobthecarmodeler Posted March 24, 2018 Share Posted March 24, 2018 As you can see by the pic next to my out of the box yellow Bronco, this blue beast is anything but stock. Purchased items for the modifications include- Olson Brothers – Roadster doors and flares Fireball Modelworks- Weighted Mud King XT Tyres, Five slot mags, 3.5” suspension lift kit and 9600LB winch kit. Some scratch-built mods include – 2” body lift, body mould removed, tailgate removed, steering linkages and dash converted to RHD, front and rear bars made from brass, roll cage and sliders also brass. And donated from a 2014 Mustang kit are the seats, air cleaner, radiator and fans, Coyote engine and transmission. I couldn’t decide on leaving it clean or mudding it up, so I compromised with a little bit of dirt down the left-hand side as if it was driven with two wheels off the edge of the road along the soft muddy shoulder. Quote Link to comment Share on other sites More sharing options...
jeffs396 Posted March 24, 2018 Share Posted March 24, 2018 VERY nice! Quote Link to comment Share on other sites More sharing options...
Casey Posted March 24, 2018 Share Posted March 24, 2018 Isn't there a worldwide law which states all round rollbar mounted lights must be KC HiLiTES? Nice work on this one, Robert. It absolutely has "the look". Quote Link to comment Share on other sites More sharing options...
ChrisR Posted March 24, 2018 Share Posted March 24, 2018 Awesome! Quote Link to comment Share on other sites More sharing options...
martinfan5 Posted March 24, 2018 Share Posted March 24, 2018 Very cool Quote Link to comment Share on other sites More sharing options...
Classicgas Posted March 24, 2018 Share Posted March 24, 2018 Quite a modification. How did you do the body mods? Quote Link to comment Share on other sites More sharing options...
espo Posted March 24, 2018 Share Posted March 24, 2018 Two beautiful builds with a great contrast between stock and what we all would rather have. I like your idea of mud on one side only so that you can also see just how nice it looks when cleaned up. Quote Link to comment Share on other sites More sharing options...
stavanzer Posted March 24, 2018 Share Posted March 24, 2018 Love the 'Roo Bar! That colour is sharp too. What a great build. Were the Olsen Roadster Doors difficult to install. I want to use a set on my Bronco, but have not bought any yet? Quote Link to comment Share on other sites More sharing options...
bobthecarmodeler Posted March 24, 2018 Author Share Posted March 24, 2018 (edited) 16 hours ago, Classicgas said: Quite a modification. How did you do the body mods? Lee. body mould was sanded off. Lower rockers were rounded by sanding as well. Wheel arches enlarged with a Dremel to accept resin flares. Doors and tailgate were removed using the old cotton saw method. Robert Edited March 25, 2018 by bobthecarmodeler incorrect name Quote Link to comment Share on other sites More sharing options...
bobthecarmodeler Posted March 24, 2018 Author Share Posted March 24, 2018 58 minutes ago, alexis said: Love the 'Roo Bar! That colour is sharp too. What a great build. Were the Olsen Roadster Doors difficult to install. I want to use a set on my Bronco, but have not bought any yet? Alan, Roadster doors were quite a good fit after cutting the original doors out with cotton. only had to sand a couple of spots of the resin inserts that overlapped behind the rear quarter panel to make the outside flush. Rober Quote Link to comment Share on other sites More sharing options...
mikemodeler Posted March 24, 2018 Share Posted March 24, 2018 Quite a nice looking pair you have there Mate! Love the stock and off roader versions, nicely detailed! Quote Link to comment Share on other sites More sharing options...
Ron Hamilton Posted March 25, 2018 Share Posted March 25, 2018 Oh WoW!!!! Quote Link to comment Share on other sites More sharing options...
afx Posted March 25, 2018 Share Posted March 25, 2018 Very nice Robert. Quote Link to comment Share on other sites More sharing options...
ATHU Posted March 25, 2018 Share Posted March 25, 2018 Looking good!! Great build!! Quote Link to comment Share on other sites More sharing options...
stavanzer Posted March 25, 2018 Share Posted March 25, 2018 Thanks, Robert! I need to just pull the trigger and order some Olsen Stuff, and some more Fireball stuff for my Bronco. Quote Link to comment Share on other sites More sharing options...
PARTS GUY Posted March 25, 2018 Share Posted March 25, 2018 very cool build. Both the Olson and Fireball resin parts are very good. The Olson hood is excellent. Quote Link to comment Share on other sites More sharing options...
Silver Foxx Posted March 25, 2018 Share Posted March 25, 2018 Nice work on this Rob , looks great . Quote Link to comment Share on other sites More sharing options...
slusher Posted March 27, 2018 Share Posted March 27, 2018 Looks great! Quote Link to comment Share on other sites More sharing options...
crazyjim Posted March 27, 2018 Share Posted March 27, 2018 Terrific build(s). Quote Link to comment Share on other sites More sharing options...
Jim N Posted March 27, 2018 Share Posted March 27, 2018 Both of them look great! Super detailing on the off roader. Quote Link to comment Share on other sites More sharing options...
thatz4u Posted March 27, 2018 Share Posted March 27, 2018 pretty good eyesight there mate, to letter the valve covers !!! Love them both Quote Link to comment Share on other sites More sharing options...
Davoski Posted March 28, 2018 Share Posted March 28, 2018 This is fantastic, Bob! Where did you source the Cibie Super Oscars? I need about 16!! Quote Link to comment Share on other sites More sharing options...
RAMBENNA Posted March 28, 2018 Share Posted March 28, 2018 SWEET nice job, looks great Quote Link to comment Share on other sites More sharing options...
bobthecarmodeler Posted March 29, 2018 Author Share Posted March 29, 2018 On 28/03/2018 at 11:17 AM, Davoski said: This is fantastic, Bob! Where did you source the Cibie Super Oscars? I need about 16!! Lights are from Fireball Modelworks Quote Link to comment Share on other sites More sharing options...
bobthecarmodeler Posted March 29, 2018 Author Share Posted March 29, 2018 Thankyou very much for all the comments guys Robert Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.