traditional Posted May 19, 2018 Share Posted May 19, 2018 Back in 1983, my brother, Cliff, and I purchased a full-size1961 Chevrolet Biscayne 2 door sedan and began a 2 year total 'body off ' restoration. This car has a radio and heater delete option, is equipped with a 'tri-power' 348 'W' block engine, an aluminum cased Borg Warner T10 4 speed transmission, a 'posi' rear axle, and a factory tachometer (mounted at the 10:00 oclock position on the steering column) . As a passionate model builder, a 1/25 model of our car has always been on my back burner and has finally come to fruition over this past winter and late spring...my model building season of choice. Although there may be simple resin versions available, no kit or toy manufacturer produces a 1/25 or 1/24 '61 Biscayne so I began with a TESTORS 1/25 kit of an Impala hardtop, a bit basic but appropriate starting material. including the obvious absence of most exterior trim, a Biscayne is remarkably different from an Impala hardtop in roof, door, and trunk structure, front, side, and rear glass form, as well as incorporating an entirely different interior...headliner, door panels, seats, dash trim, etc. Since I always like to fabricate operating features into my models, for durability, the entire roof, door and window frames and their hinges, hood and trunk hinge detail, opening gas filler door, and much of the steering, all coil suspension springs, etc have been fabricated in soldered brass. The entire array of interior side and interior upper roof panels, visors, armrests, seats (hinged backrests on front assemblies), and dashboard modifications (including opening glove box) have been fabricated in styrene, and the added windshield trim, door release handles and window cranks, brake lines, engine wiring and plumbing, etc.were all done using varying gauges of plated and black jewelry wire. In April, I traveled to my brother's home to use his all season paint booth where I applied base coat/clearcoat 'factory' Seafoam Green to the various body assemblies, with Humbrol, Testors and Tamyia paints being used for assorted additional details. Though this model was really time consuming, it is a major delight to finally have the planned model completed....one that has certainly been on my mind for close to 35 years. Quote Link to comment Share on other sites More sharing options...
bbowser Posted May 19, 2018 Share Posted May 19, 2018 Nothing else to say but WOW! Incredible piece of work, thanks for sharing. Quote Link to comment Share on other sites More sharing options...
Jmaracing Posted May 19, 2018 Share Posted May 19, 2018 That’s amazing. Great job. Quote Link to comment Share on other sites More sharing options...
carrucha Posted May 19, 2018 Share Posted May 19, 2018 Cool conversion. Well detailed and finished. Quote Link to comment Share on other sites More sharing options...
peekay Posted May 19, 2018 Share Posted May 19, 2018 Beautifully done! Quote Link to comment Share on other sites More sharing options...
Classicgas Posted May 19, 2018 Share Posted May 19, 2018 Stunning! Quote Link to comment Share on other sites More sharing options...
cobraman Posted May 19, 2018 Share Posted May 19, 2018 Add another Wow ! Quote Link to comment Share on other sites More sharing options...
Ron Hamilton Posted May 19, 2018 Share Posted May 19, 2018 An absolutely great build. Quote Link to comment Share on other sites More sharing options...
Geno Posted May 20, 2018 Share Posted May 20, 2018 Cliff, you and Larry NEVER cease to amaze. Beautifully done my friend. Hope to see you both soon. Quote Link to comment Share on other sites More sharing options...
landman Posted May 20, 2018 Share Posted May 20, 2018 1 hour ago, cobraman said: Add another Wow ! And another one. Quote Link to comment Share on other sites More sharing options...
Hmann68 Posted May 20, 2018 Share Posted May 20, 2018 Super well done! Outstanding! Quote Link to comment Share on other sites More sharing options...
PARTSMARTY Posted May 20, 2018 Share Posted May 20, 2018 Simply put-"PERFECT" Quote Link to comment Share on other sites More sharing options...
Tom99 Posted May 20, 2018 Share Posted May 20, 2018 That is awesome!! Quote Link to comment Share on other sites More sharing options...
bytownshaker Posted May 20, 2018 Share Posted May 20, 2018 As always a beautiful build. Quote Link to comment Share on other sites More sharing options...
ewetwo Posted May 20, 2018 Share Posted May 20, 2018 That is wonderful! Quote Link to comment Share on other sites More sharing options...
oldnslow Posted May 20, 2018 Share Posted May 20, 2018 That is gorgeous . Quote Link to comment Share on other sites More sharing options...
BigTallDad Posted May 20, 2018 Share Posted May 20, 2018 Absolutely STELLAR work! I commend you! It's too bad the kit-supplied tail-light lenses stick out so far, and all four are red. The inner two lenses also had back up lights Quote Link to comment Share on other sites More sharing options...
traditional Posted May 21, 2018 Author Share Posted May 21, 2018 4 hours ago, BigTallDad said: Absolutely STELLAR work! I commend you! It's too bad the kit-supplied tail-light lenses stick out so far, and all four are red. The inner two lenses also had back up lights Back-up lights were standard on only the Impala in '61. On the Biscayne and Belair they may have been optional, but they certainly weren't present on our Biscayne. You will see them on some restorations, but seldom on period photos of '61 Biscaynes Quote Link to comment Share on other sites More sharing options...
tmb727 Posted May 21, 2018 Share Posted May 21, 2018 The level of detail and all of the effort you put in to make it your own is amazing. Beautiful work. Quote Link to comment Share on other sites More sharing options...
BigTallDad Posted May 21, 2018 Share Posted May 21, 2018 7 hours ago, traditional said: Back-up lights were standard on only the Impala in '61. On the Biscayne and Belair they may have been optional, but they certainly weren't present on our Biscayne. You will see them on some restorations, but seldom on period photos of '61 Biscaynes That makes sense. If the radio and heater were options, the b/u lights would also be an option. Quote Link to comment Share on other sites More sharing options...
Smitty Posted May 22, 2018 Share Posted May 22, 2018 (edited) On 5/20/2018 at 11:00 PM, traditional said: Back-up lights were standard on only the Impala in '61. On the Biscayne and Belair they may have been optional, but they certainly weren't present on our Biscayne. You will see them on some restorations, but seldom on period photos of '61 Biscaynes Thanks for the info on the tail/backup lights Cliff. I find that kind of information interesting, and helpful. The model looks terrific. I'm totally impressed with how correct the roof looks. Even the paint finish in the trunk looks spot on. Overall this is a very fine tribute to your real Chevy. Edited May 23, 2018 by Smitty Quote Link to comment Share on other sites More sharing options...
Dave Darby Posted May 22, 2018 Share Posted May 22, 2018 Uber nice conversion and execution. Quote Link to comment Share on other sites More sharing options...
Lovefordgalaxie Posted May 22, 2018 Share Posted May 22, 2018 Very nicely done!!! Quote Link to comment Share on other sites More sharing options...
bill lanfear Posted May 22, 2018 Share Posted May 22, 2018 Excellent fabrication and execution! Quote Link to comment Share on other sites More sharing options...
drodg Posted May 22, 2018 Share Posted May 22, 2018 Wow. I had to look a couple times to see that it was not a purchased diecast. Great Job. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.