ewetwo Posted May 27, 2018 Posted May 27, 2018 I bought a bottle of Testor’s clear glue for the windows and headlights. I’ve never used it before. At first is came out as a thick white paste. Then it started coming out as a clear liquid. I looked at the bottle and there is a white block of stuff in the bottle. Is this suppose to be there or is it bad. I just bought it at Micheal’s last week. Thank you.
Miatatom Posted May 27, 2018 Posted May 27, 2018 Might need to be mixed or has gone bad. Get some Formula 500 Canopy Glue. I got mine from Hobbylinc.
Ace-Garageguy Posted May 27, 2018 Posted May 27, 2018 ALL the white "canopy" glues are chemically the same as "Elmer's" white glue...PVA, which is polyvinyl-acetate. They ALL should be white, of uniform viscosity with no clumps, and they ALL dry clear. They are ALL water-soluble before they dry, and what YOU have is some that's settled and almost dried out, probably from sitting on the shelf for years. The "clear" stuff you see is mostly water that's separated. You SHOULD be able to stir it and shake it back into an even consistency, possibly needing to add a few drops of water. My particular go-to is this:
SfanGoch Posted May 27, 2018 Posted May 27, 2018 Gator Grip Hobby Acrylic Glue is great stuff too. In addition to attaching glass, you can use it to mock up assemblies to check for fit and whatnot.
Snake45 Posted May 28, 2018 Posted May 28, 2018 I've had great luck lately with Aileen's Tacky Glue, available at Walmart. It seems stronger than Elmers (and way cheaper than Micro Kristal Klear), but can still be removed from styrene or paint if you really need to.
ewetwo Posted May 28, 2018 Author Posted May 28, 2018 thanks everyone. A lot of options here. I did take it back to Micheals and they gave me a new one. If was bad. It was one solid cube inside.
espo Posted May 28, 2018 Posted May 28, 2018 I have used a product called Gallery Glass that I got at Michael's. This was suggested by someone on the Forum and has worked well. For Headlights I still prefer just good old Future as it will usually flow behind the Lens and show the detailing in the Headlight bucket.
Pete J. Posted May 29, 2018 Posted May 29, 2018 I've tried a lot of the glues mentioned here and always come back to Formula 500 canopy glue. It gets tacky a little quicker the the others I have tried, so you don't have to sit there squeezing the part in place until your fingers cramp. You have to go to a R/C shop to get it, but then I use several things from the R/C end of the hobby so it is not all that surprising that I would find this useful.
peteski Posted May 30, 2018 Posted May 30, 2018 Bill states that all these adhesives are chemically same as the Elmer's white glue. But doesn't' the Formula 500 glue adhere much better to smooth surfaces than Elmer's? Elmer's can easily be peeled off smooth surface. Elmer's when dry is not crystal clear. It has slightly milky look, while Formula 500 dries crystal clear and glossy?
935k3 Posted May 30, 2018 Posted May 30, 2018 (edited) 2 hours ago, peteski said: Bill states that all these adhesives are chemically same as the Elmer's white glue. But doesn't' the Formula 500 glue adhere much better to smooth surfaces than Elmer's? Elmer's can easily be peeled off smooth surface. Elmer's when dry is not crystal clear. It has slightly milky look, while Formula 500 dries crystal clear and glossy? It's actually Formula 560 canopy glue made by Pacer(Zap a Gap). I find it stronger than other white glues and I use it for allot more than clear parts. Edited May 30, 2018 by 935k3
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now