Cpt Tuttle Posted October 31, 2019 Posted October 31, 2019 Some years ago I saw this beautiful 34 and my first thought was that I had to build something similar. A carbon copy is not what I am aiming for, but rather a model inspired by this car. Unfortunately, the Thom Taylor version of the Monogram convertible is all that I have, not the best starting point but I still think that it is possible to save it. The hardest part seems to be to find some hood sides from an earlier version, I really don't like the ones in the kit and want some stock louvers.... But they appear to be rare in Sweden. I'm in the stage of collecting parts and planning now but since my builders block went away, I probably start very soon anyway.
misterNNL Posted October 31, 2019 Posted October 31, 2019 Great inspiration project. Some cars don't need wings and things to be cool!
mrm Posted October 31, 2019 Posted October 31, 2019 This would be cool. And I don’t think that Tom Taylor’s vert is a bad starting point. All you need is a Revell ‘32 Ford sedan kit, that you can graft the louvers from. It will also supply you with a much nicer and more realistic suspension for your project and a choice of two very nice engines. If you find a set of wheels and tires from the original Revell ‘32 Roadster, you’ll end up with the rake of the car on your picture too.
Cpt Tuttle Posted October 31, 2019 Author Posted October 31, 2019 Hmmm, now that was some interesting info actually.....
Cpt Tuttle Posted November 2, 2019 Author Posted November 2, 2019 I decided to try using 1937 pickup louvers on the hood sides, one of the best parts with building a hot rod is after all that you can do whatever you want, even if I still prefer the look of the stock 34 hood sides....
Cpt Tuttle Posted November 7, 2019 Author Posted November 7, 2019 Decided on a red frame since I like the contrast between red and black. Not that it will be very visible on a car with fenders anyway.
alan barton Posted November 8, 2019 Posted November 8, 2019 (edited) Mattias, if you can dig up a copy of the AMT 36 roadster/three window coupe kit, the roadster cowl and door tops can be grafted onto the Monogram 34 cabriolet body quite effortlessly and you will then have the roadster contours that you desire. It will also give you a believable windshield frame. The 34 and 36 Ford windshield posts are remarkably similar, it is just that the 36 ones are a bit bigger in all dimensions. In this case, the difference between 1/24 and 1/25 works in your favour. The cabriolet details around the waistline are quite clunky by comparison. I have done this conversion but unfortunately wont be able to shoot a photo for a couple of weeks. Trust me, it works! Cheers Alan Edited November 8, 2019 by alan barton extra info
Cpt Tuttle Posted November 9, 2019 Author Posted November 9, 2019 OK, no fit issues with the hood then?
alan barton Posted November 9, 2019 Posted November 9, 2019 I'll have to check that when I get home. Didn't strike me as unworkable at the time. Cheers Alan
Koellefornia Kid Posted November 9, 2019 Posted November 9, 2019 Nice project! ´33/´34 Fords always were my favorite rods, wo I´ll be watching...
Cpt Tuttle Posted November 10, 2019 Author Posted November 10, 2019 Grafted on the 36 parts, yeah, you're right, they are a great fit indeed. It turned out that the hood was a bit long and wide, so by carving a bit in the back I made it fit against the 36 cowl. Thank you very much for the tip, I bought a giant pile of 36 parts some years ago, but this idea never struck me! The 4 bar suspension was missing from this kit so I found one in the parts box, a bit long rods maybe but they will work anyway I guess. Though they were gold (yuk) so they got some Testors chrome silver. Wheels from AMT 41 Ford, rear tyres from the kit since I could not find any better ones actually, front tyres unknown from the parts box....
stavanzer Posted November 10, 2019 Posted November 10, 2019 Cap'n I really like the way this going. The Red/Black contrast is sharp. Keep it up!
Cpt Tuttle Posted November 17, 2019 Author Posted November 17, 2019 Painted the body, but I am a bit disappointed by the shine, so I will sand it down and give it some more clearcoat.
David G. Posted November 17, 2019 Posted November 17, 2019 Looks like you're off to a good start. David G.
Mr. Metallic Posted November 19, 2019 Posted November 19, 2019 On 11/8/2019 at 5:10 PM, alan barton said: Mattias, if you can dig up a copy of the AMT 36 roadster/three window coupe kit, the roadster cowl and door tops can be grafted onto the Monogram 34 cabriolet body quite effortlessly and you will then have the roadster contours that you desire. It will also give you a believable windshield frame. The 34 and 36 Ford windshield posts are remarkably similar, it is just that the 36 ones are a bit bigger in all dimensions. In this case, the difference between 1/24 and 1/25 works in your favour. The cabriolet details around the waistline are quite clunky by comparison. I have done this conversion but unfortunately wont be able to shoot a photo for a couple of weeks. Trust me, it works! Cheers Alan Thanks for this info. I've looked at the Thom Taylor kit a ton of times since it was released years ago. I always looked at that cabriolet body and threw it right back in the box. I just couldn't get excited about that body style. Now I have ideas forming in my brain with the easy conversion idea you provided. Thanks!
alan barton Posted November 21, 2019 Posted November 21, 2019 (edited) Glad to be of help, Mattias and Craig. I'm sure that everyone on this forum has had at least one "Now why didn't I think of that ?" moment while browsing these posts. Happy to be the guy providing the inspiration for once! Taking it a step further ( and I haven't yet) I guess you could graft the 36 door tops to the 34 cabriolet cowl top and with a bit of filling and sanding you would get the correct door shape plus a positive fit for the hood. So many ideas, so little time! Cheers Alan Edited November 21, 2019 by alan barton
Cpt Tuttle Posted January 2, 2020 Author Posted January 2, 2020 Starting to look more like a nice hot rod now, and less like a bunch of boring plastic parts, I guess..... Yeah, just a mock up, but still.
Cpt Tuttle Posted January 3, 2020 Author Posted January 3, 2020 Painted the interior parts one of my favourite colours to use for interiors, Tamiya "hull red". Probably quite a close match to the shade seen on the inspiration too.
Oldcarfan27 Posted January 21, 2020 Posted January 21, 2020 On 1/2/2020 at 7:02 AM, Cpt Tuttle said: Starting to look more like a nice hot rod now, and less like a bunch of boring plastic parts, I guess..... Yeah, just a mock up, but still. Before you get too far on that hood, shouldn't the grille slope back a little more? Looks too vertical too me.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now