Rob Hall Posted January 27, 2020 Share Posted January 27, 2020 (edited) 8 minutes ago, alexis said: IIRC, Rob the same "iffy' small block V-8 that Revell used in the Chevy Square-Body Chevrolet Trucks. Like the Billy Carter Pickup. No, this LUV is the Monogram 1/24th kit, not the Revell one. Googling turned up the original box art, it shows the engine on the side of the box, can't tell what it is from this angle..I'd assume a 4cyl. Edited January 27, 2020 by Rob Hall Link to comment Share on other sites More sharing options...
mikemodeler Posted January 27, 2020 Share Posted January 27, 2020 I'm in! Would love to have that LUV and Elky and if that Jeep is a stock kit, count me as a buyer. Link to comment Share on other sites More sharing options...
Exotics_Builder Posted January 27, 2020 Share Posted January 27, 2020 Hmmm... Link to comment Share on other sites More sharing options...
stavanzer Posted January 27, 2020 Share Posted January 27, 2020 Yep, the Same Kit was also released as the "Mojave Mule" 4x4 with the neat "Off Road Research" graphics. This kit just jumped to the top of my list! Link to comment Share on other sites More sharing options...
Rob Hall Posted January 27, 2020 Share Posted January 27, 2020 Ah, looks like a V8..so definitely not stock. Link to comment Share on other sites More sharing options...
martinfan5 Posted January 27, 2020 Share Posted January 27, 2020 (edited) Well hopefully the aftermarket world will step up and do up a correct I4 engine and stocks wheels for the Luv, I would "luv" for that to happen Edited January 27, 2020 by martinfan5 Link to comment Share on other sites More sharing options...
Rob Hall Posted January 27, 2020 Share Posted January 27, 2020 (edited) 6 minutes ago, martinfan5 said: Do we know what the new parts are? Some may be visible in this pic of the kit and box art I saw posted in an FB group yesterday. Front bumper, wheels and tires look like stock items instead of the off road style in the previous issue..looks like maybe a stock rollbar/rollcage.... Here is what a stock early-00s Wrangler Rubicon would look like... Edited January 27, 2020 by Rob Hall Link to comment Share on other sites More sharing options...
martinfan5 Posted January 27, 2020 Share Posted January 27, 2020 2 minutes ago, Rob Hall said: Some may be visible in this pic of the kit and box art I saw posted in an FB group yesterday. Front bumper, wheels and tires look like stock items instead of the off road style in the previous issue..looks like maybe a stock rollbar/rollcage.... Thanks Rob Link to comment Share on other sites More sharing options...
Plowboy Posted January 27, 2020 Share Posted January 27, 2020 Something I noticed on the Luv is that it has the split air dams like the stepside has. When I get one, I'll do away with the fender flares and air dams. Link to comment Share on other sites More sharing options...
Goose1957 Posted January 28, 2020 Share Posted January 28, 2020 (edited) Great, another Jeep kit to add to the list (and after seeing the Italeri new release thread). I'm kidding, I can't wait for the stock version. I must have about a dozen of the modified kits and snap kits. I need a stock one to model my daily driver. The modified one has too many modifications to model my Jeep. Thank you Revell, bring it out tomorrow, lol. Jeff Edited January 28, 2020 by Goose1957 Spelling error Link to comment Share on other sites More sharing options...
Mark Posted January 28, 2020 Share Posted January 28, 2020 The LUV is probably a fair start towards a stock version. Are the pickup bed inner wheel houses correct? The kit pickup bed has them running from front to back instead of being only behind the wheel opening on each side. Losing the custom fender flares will take some doing, nothing out of reach for anyone who has done much in the way of conversions. As for the engine, maybe check the rapid prototype guys, someone out there might be a LUV fanatic who wants a stock model and has a 1:1 engine to work from to develop one in scale. As an aside, not many people remember, but the '82 (first year only) S-10 was available with that engine. Link to comment Share on other sites More sharing options...
highway Posted January 28, 2020 Share Posted January 28, 2020 7 hours ago, Rob Hall said: Some may be visible in this pic of the kit and box art I saw posted in an FB group yesterday. Front bumper, wheels and tires look like stock items instead of the off road style in the previous issue..looks like maybe a stock rollbar/rollcage.... Now this has piqued my interest even more with the Rubicon kit even more, because from the previous pic only showing the front corner that was making it appear it was going to be a factory stock offering, I'm now curious to find out if it will now be a 2 in 1 kit. Regardless I know I would like at least one for a factory stock build to go along with the previous issue I already have, but having the stock and off road parts included I could see some very interesting variations being built out of this kit, and I know in my case any using the factory wheels and tires those Mickey Thompson Baja Claws wouldn't go to waste! Link to comment Share on other sites More sharing options...
Plowboy Posted January 28, 2020 Share Posted January 28, 2020 2 hours ago, Mark said: Are the pickup bed inner wheel houses correct? The kit pickup bed has them running from front to back instead of being only behind the wheel opening on each side. No. The full scale has wheel wells just like any other pickup. Thinking that modification may had something to do with the topper. It would be a good modification on the full scale also. They were a single wall bed. So, if something slid around in the bed, you'd get a dent poking out. Link to comment Share on other sites More sharing options...
DukeE Posted January 28, 2020 Share Posted January 28, 2020 OK, here's the relatively stock snaptite Jeep, and versions of the Luv. Stepside nasty, at least better than goofy Revell thing. Normal side truck looks ok, bumpers, all but flares, front spoiler seem OK. I tossed in a built one, as it really looks like you could clean it up a bit. Bed wheel wells look like they go all the way to tailgate? Link to comment Share on other sites More sharing options...
niteowl7710 Posted January 28, 2020 Share Posted January 28, 2020 That's the Build n Plays Wrangler, the only thing about it and the Tomb Raiders Jeep share are the fact they're Jeeps. Link to comment Share on other sites More sharing options...
DukeE Posted January 28, 2020 Share Posted January 28, 2020 (edited) 12 hours ago, niteowl7710 said: That's the Build n Plays Wrangler, the only thing about it and the Tomb Raiders Jeep share are the fact they're Jeeps. That, a nearly identical chassis, interior sl different because hardtop, and 5 bolt vs 6 bolt bead locks. Same tires. Yep, you nailed it. Edited January 28, 2020 by DukeE nearly added Link to comment Share on other sites More sharing options...
Rob Hall Posted January 28, 2020 Share Posted January 28, 2020 48 minutes ago, DukeE said: That, an identical chassis, tires, interior sl different because hardtop, and 5 bolt vs 6 bolt bead locks. Yep, you nailed it. I see some similarities to the chassis and interior, not identical though. Link to comment Share on other sites More sharing options...
stavanzer Posted January 28, 2020 Share Posted January 28, 2020 I have tried to test fit the top from the Build'n'Play to the Snap TR Wrangler. At least for me, the top came nowhere near fitting. Size issues and other fit problems. I might try again though just to see if I was wrong. Does anybody have both kits? Link to comment Share on other sites More sharing options...
hpiguy Posted January 28, 2020 Share Posted January 28, 2020 I have copies of the 29 and Jeep Rubicon right now and have been given clearance to build the 29 and make the video public (it's a 2n1 and will be getting two seperate videos as each one), but have to wait to issue the video on the Jeep until they say so. They both look great. We'll see soon enough what is all new in each. Link to comment Share on other sites More sharing options...
Recommended Posts