charlie8575 Posted November 13, 2020 Share Posted November 13, 2020 On 11/3/2020 at 9:07 PM, Plowboy said: Thanx Rob! Those help! Is there any way one of them could measure from the top rear of the door to the corner of the quarter window? That would help a ton! Something else I noticed on the rear window is the top corners need to be rounded. If anyone sees anything wrong, please speak up! I won't get butt hurt over it! I'm not going for perfect. But, I want it to be pretty accurate as far as the body goes. I'm not going to sweat the interior much. One way you could do that is by measuring a known point on the exterior, and go from there. Pick a part of the car that we know the measurement of. The wheelcovers are about 15" in diameter. Measure those in the photo. We know that 15" is 0.6" in 1/25. Using that standard, you can take the various measurements you need, and get it reasonably close. You look like you've got a really good start at it. I'll enjoy seeing the finished results. Charlie Larkin Quote Link to comment Share on other sites More sharing options...
Plowboy Posted November 16, 2020 Author Share Posted November 16, 2020 Finally back in primer ready to sand and paint! I also have the interior and headliner in paint. It's Tamiya AS-15 Tan. I'll go over it with Tamiya TS-80 Matte Clear, then add some sheen on the seats and panels with Future. The paint should be here tomorrow. It's TS-1 Red Brown. I may shoot a coat of clear pearl over it before clear. Just have to see what it looks like once it's on there. One goof I made was I didn't try the hubcaps on the wheels before I painted them and discovered too late that the nubs that would hold them on stuck out past the hubcaps. I have a set of wire wheels coming that I think can be made to look like a wheel cover. We'll see. Quote Link to comment Share on other sites More sharing options...
wrenchr Posted November 16, 2020 Share Posted November 16, 2020 Roger your work is amazing!! Quote Link to comment Share on other sites More sharing options...
doorsovdoon Posted November 16, 2020 Share Posted November 16, 2020 That's looking great, very nice work. Quote Link to comment Share on other sites More sharing options...
slusher Posted November 17, 2020 Share Posted November 17, 2020 I know it’s going to sharp when you paint it, looks great in primer... Quote Link to comment Share on other sites More sharing options...
TooOld Posted November 17, 2020 Share Posted November 17, 2020 Excellent body work Roger ! I think the Red Brown paint will look sharp when your finished ! Quote Link to comment Share on other sites More sharing options...
rickcaps55 Posted November 17, 2020 Share Posted November 17, 2020 On 11/3/2020 at 8:38 PM, Repstock said: I hope this helps WoW.! i can't believe how awesome this one came out i want to do both the 69 and 70 yours is great very nice. Quote Link to comment Share on other sites More sharing options...
rickcaps55 Posted November 17, 2020 Share Posted November 17, 2020 18 hours ago, Plowboy said: Finally back in primer ready to sand and paint! I also have the interior and headliner in paint. It's Tamiya AS-15 Tan. I'll go over it with Tamiya TS-80 Matte Clear, then add some sheen on the seats and panels with Future. The paint should be here tomorrow. It's TS-1 Red Brown. I may shoot a coat of clear pearl over it before clear. Just have to see what it looks like once it's on there. One goof I made was I didn't try the hubcaps on the wheels before I painted them and discovered too late that the nubs that would hold them on stuck out past the hubcaps. I have a set of wire wheels coming that I think can be made to look like a wheel cover. We'll see. That is great awesome it's really coming along very nice build. Quote Link to comment Share on other sites More sharing options...
TransAmMike Posted November 17, 2020 Share Posted November 17, 2020 Not to sound ugly here, but for a pretty blah car it's pretty cool. Looking good Richard? Quote Link to comment Share on other sites More sharing options...
slusher Posted November 17, 2020 Share Posted November 17, 2020 Roger I had to look at the Tamiya red brown on eBay. Red Brown looks like a Ford factory color. Made me think of the Ford Burt Reynolds drove in White Lightning... Good looking color.. Quote Link to comment Share on other sites More sharing options...
Plowboy Posted November 20, 2020 Author Share Posted November 20, 2020 Thanx guys, I appreciate the feedback! I shot the Red Brown (two coats) today and it really laid down smooth. So, I went ahead and shot a coat of clear pearl over it to give it a metallic look. Once this is cured well, I'll shoot two or three coats of clear over it. I forgot to foil the Galaxie 500 script on the trunk before paint. So, I'll have to paint it by hand. I'm also going through several different sets of wheels and tires for it. I have these, a set of slightly deep steel wheels that the hubcaps fit, a set of AMT wire wheels that kinda look like a wheel cover and a set of Hellas painted gold with chrome highlights. If I can't nail down something from that group, I'll give up! Right now, it looks like a big turd! Hopefully, it'll come together in the end. Quote Link to comment Share on other sites More sharing options...
Brutalform Posted November 22, 2020 Share Posted November 22, 2020 On 11/10/2020 at 10:23 AM, Plowboy said: No, it's a four door. I just converted this one over to a two door. Sorry for the confusion. And you did one heck of a job on it! Looks fantastic, Roger. Quote Link to comment Share on other sites More sharing options...
Scott8950 Posted November 23, 2020 Share Posted November 23, 2020 looking awesome Roger. Quote Link to comment Share on other sites More sharing options...
Erik Smith Posted November 24, 2020 Share Posted November 24, 2020 Really great work. My kind of car, turd brown and whitewalls. Quote Link to comment Share on other sites More sharing options...
thatz4u Posted November 24, 2020 Share Posted November 24, 2020 Roger, it's looking good, can't wait to see it finished.. Quote Link to comment Share on other sites More sharing options...
Plowboy Posted December 13, 2020 Author Share Posted December 13, 2020 This one's almost done! May have it done today. Here's the interior. I didn't do a whole lot to it as I didn’t feel it was worth the effort. No window cranks, faint engraving etc. Here's the body in clear with the wheels and tires. Thanx to those that followed along and helped with photos and comments! Much appreciated! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.