Phildaupho Posted October 8, 2022 Share Posted October 8, 2022 (edited) I am building a tribute model to what is considered the first full custom car in Vancouver BC Canada. In 1951 Jack Williams customized a two-year-old '49 Ford 4-door. To create a 4-door I used two AMT '49 Ford Coupe bodies. I cut out the side windows and removed the back portion of the roof from both bodies. The front window frames from one of the bodies would become the back window frames on the 4-door. Both front and rear windows needed to be shortened to the lengths of the re-scribed side doors. The roof was lengthened using the second roof section. The A and C pillars were chopped a scale 3-inches, but I was surprised when the side window heights remained almost stock I guess this was due to the material removed when the window frames were cut from the bodies. The back side window shape is a long way from being accurately stock but was the closest I could get without cutting up another body like maybe a '57 Chev 2-Door Post. I used the running gear from a previously built shoebox for the mock-up. Another unique feature of the car was that it was powered by a Cadillac V-12. I am going to try to fabricate something representative by mating parts from two AMT '51 Chev 6-cylinder engines. This car still exists locally, and I hope to see it again soon. Edited December 22, 2022 by Phildaupho 9 Quote Link to comment Share on other sites More sharing options...
Modelcarjedi Posted October 8, 2022 Share Posted October 8, 2022 Cool project ! Quote Link to comment Share on other sites More sharing options...
Misha Posted October 9, 2022 Share Posted October 9, 2022 That’s quite the project Phil! Be following your slice ‘n’ dice with great interest. Great to see another local replica build in your talented hands. Cheers Misha Quote Link to comment Share on other sites More sharing options...
chris chabre Posted October 10, 2022 Share Posted October 10, 2022 thats a good looking 4 door... I DO NOT say that often haha Quote Link to comment Share on other sites More sharing options...
Koellefornia Kid Posted October 10, 2022 Share Posted October 10, 2022 Great project and nice work so far! Really like the inspiration car! Quote Link to comment Share on other sites More sharing options...
Phildaupho Posted October 21, 2022 Author Share Posted October 21, 2022 On 10/8/2022 at 6:07 PM, Misha said: That’s quite the project Phil! Be following your slice ‘n’ dice with great interest. Great to see another local replica build in your talented hands. Cheers Misha On 10/10/2022 at 6:42 AM, chris chabre said: thats a good looking 4 door... I DO NOT say that often haha On 10/10/2022 at 10:36 AM, Koellefornia Kid said: Great project and nice work so far! Really like the inspiration car! Quote Link to comment Share on other sites More sharing options...
Phildaupho Posted October 21, 2022 Author Share Posted October 21, 2022 Thanks guys - I have a small update. At the front of the model, you will see the Maple Leaf Modelworks 3-D printed 51 Meteor grill. It did require a fair amount of trimming for it to fit the opening. Also visible are the frenched headlights, smoothed bumper and rounded hood corners. The Buick side trim is from Replicas & Miniatures. At the rear of the model, I have opened up the taillight mounting area so the lenses can be frenched. The rear bumper has also been smoothed and will have a custom over-rider with openings for the exhaust. 6 Quote Link to comment Share on other sites More sharing options...
slusher Posted October 22, 2022 Share Posted October 22, 2022 Very nice work really looking like the inspiration picture! Quote Link to comment Share on other sites More sharing options...
stavanzer Posted October 22, 2022 Share Posted October 22, 2022 Both Monogram and Johan kitted Caddy V-16s. I'd offre one, but I sold those kits off. Quote Link to comment Share on other sites More sharing options...
espo Posted October 22, 2022 Share Posted October 22, 2022 Great looking body work. Changing this too a four-door was done very smoothly. Quote Link to comment Share on other sites More sharing options...
Phildaupho Posted October 31, 2022 Author Share Posted October 31, 2022 Jack Williams installed a 1937 Cadillac V-12 in his 49 Ford Custom. Initially he tried two carbs per side but reverted to one per side. He moved the radiator ahead of the forward bulkhead for extra clearance. After I found out a Cadillac V-12 was not unlike two Chev inline 6-cylinder engines mounted at 45 degrees a friend offered me two Galaxie 48 Chev engines. My V-12 uses the valve covers from the AMT 51 Chev, transmission from the AMT 49 Ford and front assembly and air cleaners from the AMT 49 Merc optional MOPAR engine. I plan to mount the distributor at the forward end of the valley to feed inboard spark plugs which may not be correct but that is how I am going to do it. 5 Quote Link to comment Share on other sites More sharing options...
slusher Posted November 1, 2022 Share Posted November 1, 2022 That’s a lot of engine in that Ford! Should be a fast one.. 1 Quote Link to comment Share on other sites More sharing options...
Misha Posted November 1, 2022 Share Posted November 1, 2022 That’s really wild Phil! Great engine construction. Cheers Misha 1 Quote Link to comment Share on other sites More sharing options...
ea0863 Posted November 1, 2022 Share Posted November 1, 2022 So cool! Looking forward to the finished build 1 Quote Link to comment Share on other sites More sharing options...
Zippi Posted November 1, 2022 Share Posted November 1, 2022 Nice work on the 49 Ford Shoebox. I'm liking this one. 1 Quote Link to comment Share on other sites More sharing options...
LDO Posted November 2, 2022 Share Posted November 2, 2022 Would a shortened V-16 work? I have several unbuilt 1930s Cadillacs with V-16s. I’m not big on displaying engines. If you could use one, let me know. Quote Link to comment Share on other sites More sharing options...
Phildaupho Posted November 2, 2022 Author Share Posted November 2, 2022 On 10/31/2022 at 6:50 PM, slusher said: That’s a lot of engine in that Ford! Should be a fast one.. 21 hours ago, Misha said: That’s really wild Phil! Great engine construction. Cheers Misha 21 hours ago, ea0863 said: So cool! Looking forward to the finished build 15 hours ago, Zippi said: Nice work on the 49 Ford Shoebox. I'm liking this one. Thanks guys - When the real car had the V-12 it was always hoodless because a hood could not be closed due to the size of the engine. That will not be the case with the model so it will also be able to be displayed as it looked when the Cadillac engine was replaced. Quote Link to comment Share on other sites More sharing options...
Phildaupho Posted November 2, 2022 Author Share Posted November 2, 2022 9 minutes ago, LDO said: Would a shortened V-16 work? I have several unbuilt 1930s Cadillacs with V-16s. I’m not big on displaying engines. If you could use one, let me know. Thanks Lee - Yes, a shortened V16 would work great. Thanks for the offer but as you can see, I have made a V12 that I am pretty satisfied with. Quote Link to comment Share on other sites More sharing options...
Bullybeef Posted November 3, 2022 Share Posted November 3, 2022 (edited) Man that’s quite the undertaking Phil, the symmetry in that engine bay is awesome. Edited November 3, 2022 by Bullybeef Quote Link to comment Share on other sites More sharing options...
MeatMan Posted November 3, 2022 Share Posted November 3, 2022 Cool! Quote Link to comment Share on other sites More sharing options...
Phildaupho Posted November 3, 2022 Author Share Posted November 3, 2022 7 hours ago, Bullybeef said: Man that’s quite the undertaking Phil, the symmetry in that engine bay is awesome. Thanks, Bil. Getting everything to fit is a challenge as it must have been with the original 6 hours ago, MeatMan said: Cool! Thanks Dennis Quote Link to comment Share on other sites More sharing options...
bobthehobbyguy Posted November 4, 2022 Share Posted November 4, 2022 Cool project. I'm curious how did you create the block for the v12. Quote Link to comment Share on other sites More sharing options...
bobthehobbyguy Posted November 4, 2022 Share Posted November 4, 2022 (edited) Duplicate post Edited November 4, 2022 by bobthehobbyguy Quote Link to comment Share on other sites More sharing options...
Phildaupho Posted November 4, 2022 Author Share Posted November 4, 2022 2 hours ago, bobthehobbyguy said: Cool project. I'm curious how did you create the block for the v12. I used 2 Galaxie 6 cylinder blocks with bell housings cut off. I made a couple of templates of the front engine dimensions and another of the front of the oil pan. I set them at 45degrees to establish the cuts I would needs to make. Both ends of the block were blanked off with sheet plastic. Once the blocks were cut they were glued together and onto the oil pan with the manifolds outboard on both banks so the right side bank is a reversed 6cylinder. Quote Link to comment Share on other sites More sharing options...
Phildaupho Posted November 18, 2022 Author Share Posted November 18, 2022 I got to closely examine the real car yesterday and actually go for a drive. Very cool. It has been flathead powered for decades. The immaculate chrome was redone 50 years ago. It obviously has not been restored but is in incredibly good condition - especially the body. 6 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.