Spottedlaurel Posted February 27 Share Posted February 27 4 hours ago, Ulf said: This one ? Those caps would be perfect! Now to find that kit a sensible price..... It's nowhere near the top of the list at present, and maybe I'll build it with some other hub caps until the XK-120 comes along? Quote Link to comment Share on other sites More sharing options...
Sledsel Posted February 28 Share Posted February 28 9 hours ago, ewetwo said: Picked this stuff up today. Galaxy must be old because it’s 2 metal axels and the plastic body is white. Not red or green plastic. The truck has had some stuff started but done well. They came as a package deal so I don’t know about the truck. Your black and chrome pieces are for the 73 Cougar FYI Quote Link to comment Share on other sites More sharing options...
ewetwo Posted February 28 Share Posted February 28 (edited) On 2/28/2024 at 12:50 AM, Sledsel said: Your black and chrome pieces are for the 73 Cougar FYI Yes. I figured it out. I think the majority of an engine is there. And the side pipes. The Trans Am is a FunDimensions 1979 Trans Am Promo kit car.The Ford Galaxie is in the soaker tank as the paint was really bad. See the paint will come off. Update. The paint came off the Ford. Edited February 29 by ewetwo Quote Link to comment Share on other sites More sharing options...
PierreR89 Posted February 28 Share Posted February 28 Got 2 C15 engines today, one i have planed to use in a truck that i am going to build someday and are slowly gathering parts for. The other will be added to my collection of truck engines. My goal is to have one of each that came in different truckkits and are offererd in the aftermarket. 1 Quote Link to comment Share on other sites More sharing options...
Carmak Posted February 29 Share Posted February 29 On 2/26/2024 at 11:49 AM, Sledsel said: a few years ago I was looking thru Ebay listings and found a 66 Mustang and 66 Galaxie kit for a cheap starting bid. There was one pic with the listing showing 2 partial builds in a box and all you saw was the tops (hood, roof, trunk) that's it. I put in a bid upon noticing it was not a 66 Galaxie, it was a 68. My opening bid won and I received 2 fairly complete kits. Galaxie was all there, light gluing and no paint on anything but the custom seats were in it and stock seats/console was not included. I started a build and put it away for lack of seats. Low-and-behold I was looking at ebay last week and found a set of 1969 Galaxie seats. Looked at my 69 kit and they are molded in... Hmmmmm, well, needless to say, the seller listed '68 seats as '69's and had a low "buy it now" I got them!!!!!!! . And I found this at a flea market this weekend Round2 opened up all of blocked gates on the most recent issue of the 69 Galaxie which included many parts for the 68 Galaxie. If you watch the HPIGUY review/build you can see there are extra suspension and interior parts in the 69 kit that were parts of the 68 kit. The seller was partially correct that they came from the 69 kit but your good eye spotted them for what they were. Quote Link to comment Share on other sites More sharing options...
Sledsel Posted February 29 Share Posted February 29 2 hours ago, Carmak said: Round2 opened up all of blocked gates on the most recent issue of the 69 Galaxie which included many parts for the 68 Galaxie. If you watch the HPIGUY review/build you can see there are extra suspension and interior parts in the 69 kit that were parts of the 68 kit. The seller was partially correct that they came from the 69 kit but your good eye spotted them for what they were. I just watched it and was shocked to see that, the suspension and exhaust pieces. I guess I'll pick up a current release of the 69 even though I already have several earlier releases. Thanks for the info tho. Guess I am not so stoked anymore for my seats! Quote Link to comment Share on other sites More sharing options...
A modeler named mike Posted February 29 Share Posted February 29 Arrived today.. The Batmobile has been one of my favorite vehicles since watching Adam West and Burt Ward on ? as a kid. HOLY SMOKES that was a long time ago. 2 Quote Link to comment Share on other sites More sharing options...
CA Whitecloud Posted February 29 Share Posted February 29 Love these micro-applicators. And some other bits. 2 Quote Link to comment Share on other sites More sharing options...
CA Whitecloud Posted February 29 Share Posted February 29 5 minutes ago, A modeler named mike said: The Batmobile has been one of my favorite vehicles since watching Adam West and Burt Ward on ? as a kid. Me too. 1 Quote Link to comment Share on other sites More sharing options...
A modeler named mike Posted February 29 Share Posted February 29 20 minutes ago, CA Whitecloud said: Me too. Sweet!! Thanks for sharing Calvin.. I have a remote control Batmobile that I used to use to chase our grandkids around the house when they were toddlers. That too was long ago. 1 Quote Link to comment Share on other sites More sharing options...
CA Whitecloud Posted March 1 Share Posted March 1 Belated birthday haul all the way from Japan. I've never heard of Aoshima kits until now. 6 Quote Link to comment Share on other sites More sharing options...
ewetwo Posted March 1 Share Posted March 1 21 hours ago, CA Whitecloud said: Love these micro-applicators. And some other bits. What do you use with these to make parts stick to them. I've never seen them until recently here on the forum. Quote Link to comment Share on other sites More sharing options...
CA Whitecloud Posted March 1 Share Posted March 1 (edited) 1 hour ago, ewetwo said: What do you use with these to make parts stick to them. I've never seen them until recently here on the forum. Hi David, you are referring to these. They come with a sticky pad to refresh the tips. I have not used them much yet. They should be handy with PE parts. The previous post shows micro-applicators. Like a tiny swab thay have an absorbent tip. Anytime I would usually grab a toothpick I'll try these. They are great for dabs of glue or paint. If your eyes are good enough they do great on things like dashboard knobs. Edited March 1 by CA Whitecloud 2 Quote Link to comment Share on other sites More sharing options...
A modeler named mike Posted March 1 Share Posted March 1 Delivered today. A complete kit! My gotta have list is starting to get smaller ? maybe? 9 Quote Link to comment Share on other sites More sharing options...
ewetwo Posted March 1 Share Posted March 1 2 hours ago, CA Whitecloud said: Hi David, you are referring to these. They come with a sticky pad to refresh the tips. I have not used them much yet. They should be handy with PE parts. The previous post shows micro-applicators. Like a tiny swab thay have an absorbent tip. Anytime I would usually grab a toothpick I'll try these. They are great for dabs of glue or paint. If your eyes are good enough they do great on things like dashboard knobs. I'm ordering some tomorrow. Unless my local shop has them and he might as he deals mostly with trains. 1 Quote Link to comment Share on other sites More sharing options...
Keef Posted March 1 Share Posted March 1 Picked up some clearance items from Hobby Lobby 2 Quote Link to comment Share on other sites More sharing options...
RSchnell Posted March 1 Share Posted March 1 Got my '60 F-100's and a few other kits. 5 Quote Link to comment Share on other sites More sharing options...
HomerS Posted March 2 Share Posted March 2 February adds..... Cadillac appears to be complete...molded in a beige/dirty white color Monogram Cadillac and Rolls sealed 5 Quote Link to comment Share on other sites More sharing options...
Sledsel Posted March 2 Share Posted March 2 7 hours ago, Keef said: Picked up some clearance items from Hobby Lobby Gotta say thanks for the heads up! I went to HL and got the Jimmy and a Big Rig trailer and some round sanding sticks all on clearance. Quote Link to comment Share on other sites More sharing options...
Sledsel Posted March 2 Share Posted March 2 7 hours ago, Keef said: Picked up some clearance items from Hobby Lobby Gotta say thanks for the heads up! I went to HL and got the Jimmy, a Big Rig trailer and some round sanding sticks all on clearance. Quote Link to comment Share on other sites More sharing options...
MeatMan Posted March 2 Share Posted March 2 (edited) I picked up the new Revell 64 Impala Lowrider kit. I'm not planning on making it a lowrider, but I want it "in the weeds". I have been working on the AMT 64 kit and have done a lot of work on it but there is so much to do to get it where I wanted so I just gave up. The Revell kit is so much better to me. The trunk is already opened, the frame is separate from the body pan and the height is adjustable, and the interior has separate door panels. I've bought and designed a lot of parts for it and now I can finally build the 64 the way I've wanted to. Btw, I'll be trading the LR wheels & tires if anyone's interested. They're nice if that's what you're into. Edited March 2 by MeatMan 1 Quote Link to comment Share on other sites More sharing options...
Can-Con Posted March 2 Share Posted March 2 1 hour ago, MeatMan said: I picked up the new Revell 64 Impala Lowrider kit. I'm not planning on making it a lowrider, but I want it "in the weeds". I have been working on the AMT 64 kit and have done a lot of work on it but there is so much to do to get it where I wanted so I just gave up. The Revell kit is so much better to me. The trunk is already opened, the frame is separate from the body pan and the height is adjustable, and the interior has separate door panels. I've bought and designed a lot of parts for it and now I can finally build the 64 the way I've wanted to. Btw, I'll be trading the LR wheels & tires if anyone's interested. They're nice if that's what you're into. Dennis, could you post a pic of the new decal sheet please? I'm hoping it has decals for the centers of the Cragars. I's do a trade with you but it looks like it would cost both of us over $20 each just for the shipping. ? 1 Quote Link to comment Share on other sites More sharing options...
RSchnell Posted March 2 Share Posted March 2 Ollie's haul for today. Was surprised they stocked more kits! 3 Quote Link to comment Share on other sites More sharing options...
atomicholiday Posted March 3 Share Posted March 3 Flea market find. Lots of tires, engines, and other miscellaneous stuff. 2 Quote Link to comment Share on other sites More sharing options...
MeatMan Posted March 3 Share Posted March 3 On 3/2/2024 at 10:30 AM, Can-Con said: Dennis, could you post a pic of the new decal sheet please? I'm hoping it has decals for the centers of the Cragars. I's do a trade with you but it looks like it would cost both of us over $20 each just for the shipping. ? Yes, they do have the centers, and a nice lace decal I might add. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.