Geno Posted November 4, 2017 Share Posted November 4, 2017 I'm in love with this build Steve, most excellent work by the way. Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted November 30, 2017 Author Share Posted November 30, 2017 Slow progress continues. The interior is getting very close to finished. The dash is done! I used parts from the Revell '66 GTO kit, including the steering wheel & column, grab bar & pedals. All of the dash knobs were drilled out & replaced & the dash pad had a speaker grille & defroster vents added. Hopefully the next update will be soon when the interior is complete. Steve Quote Link to comment Share on other sites More sharing options...
Can-Con Posted November 30, 2017 Share Posted November 30, 2017 Looks really good Steven, you're really going all out with this one. Mine's kinds stalled as I'm using my free time buffing the paint out on my 1/1 project. It's getting a bit too cold to work on it now so I'll be back to the 1/25 projects soon. Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted November 30, 2017 Author Share Posted November 30, 2017 49 minutes ago, Can-Con said: Looks really good Steven, you're really going all out with this one. Mine's kinds stalled as I'm using my free time buffing the paint out on my 1/1 project. It's getting a bit too cold to work on it now so I'll be back to the 1/25 projects soon. Mine has been pretty much stalled as well Steve. I manage to find a few minutes here & there in between installing lighting & tile in the kitchen. Almost done with that, so I'm hoping to get a little more time at the bench while I wait until after the holidays to start tearing up & installing new floors! Steve Quote Link to comment Share on other sites More sharing options...
Perspective Customs Posted December 5, 2017 Share Posted December 5, 2017 Looking really good Steven. The dash alone is a work of art. I love your wood grain technique. Quote Link to comment Share on other sites More sharing options...
Smitty Posted December 7, 2017 Share Posted December 7, 2017 That's pure magic Steven. That dash is like jewelry. I was wondering what you use to mask your seats when you do a multicolored treatment? Eric Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted December 7, 2017 Author Share Posted December 7, 2017 8 minutes ago, Smitty said: That's pure magic Steven. That dash is like jewelry. I was wondering what you use to mask your seats when you do a multicolored treatment? Eric Most of the time I just use Tamiya tape & occasionally a little BMF for the tough spots. Steve Quote Link to comment Share on other sites More sharing options...
Anglia105E Posted December 7, 2017 Share Posted December 7, 2017 Your dashboard for this build is really quite something Steve, and I wish I could achieve that level of detail with my 1950's Rolls-Royce dashboards. The 1967 Pontiac Bonneville is so close to the car I am interested in, which is a Canadian right-hand drive Pontiac Parisienne from 1968. As you probably know better than I do, the Parisienne was a 4-door and I just wondered if it is possible to buy a 4-door kit as well as the 2-door kits that you have? I used to own and drive a 1968 Pontiac Parisienne and I would like to build a 1:24 scale or 1:25 scale model of that car. Mine was pale yellow with a brown vinyl roof and the registration plate was FCK33. Maybe I could do a 2-door to 4-door conversion, although that would be quite a challenge. David J Watson ( England ) Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted December 7, 2017 Author Share Posted December 7, 2017 4 hours ago, Anglia105E said: Your dashboard for this build is really quite something Steve, and I wish I could achieve that level of detail with my 1950's Rolls-Royce dashboards. The 1967 Pontiac Bonneville is so close to the car I am interested in, which is a Canadian right-hand drive Pontiac Parisienne from 1968. As you probably know better than I do, the Parisienne was a 4-door and I just wondered if it is possible to buy a 4-door kit as well as the 2-door kits that you have? I used to own and drive a 1968 Pontiac Parisienne and I would like to build a 1:24 scale or 1:25 scale model of that car. Mine was pale yellow with a brown vinyl roof and the registration plate was FCK33. Maybe I could do a 2-door to 4-door conversion, although that would be quite a challenge. David J Watson ( England ) The '67 Bonneville was done by MPC in 2 door hard top & convertible configurations in 1967 only, so it's a pretty rare kit as is. Same with the '68. As far as I know, there are no 4 door resin kits available so you would have to do a complete conversion of your own, that is if you can bring yourself to cut up a kit that can potentially bring $200.00. Steve Quote Link to comment Share on other sites More sharing options...
Anglia105E Posted December 7, 2017 Share Posted December 7, 2017 Thanks very much Steve, and I had a feeling the Bonneville kit was a rare one. The potential price of $200.00 is £150.00 GBP so it would take a brave man to have a go at a conversion that wasn't guaranteed to work! I will have a look round for MPC kits from '67 and '68, while I am sourcing Rolls-Royce Silver Cloud kits from Minicraft, Entex, Academy, Masterkit and Revell, maybe try a few resin body shell producers. I have moulded and cast two body shells successfully so far for this car that is 1955 -1959 only. I suppose the '66 GTO you mentioned is a different body altogether? David Quote Link to comment Share on other sites More sharing options...
peekay Posted December 7, 2017 Share Posted December 7, 2017 That's a wonderful looking dash Steve. Even blown up to 3-times actual size, which can be very unforgiving. Quote Link to comment Share on other sites More sharing options...
gtx6970 Posted December 7, 2017 Share Posted December 7, 2017 3 hours ago, Anglia105E said: Thanks very much Steve, and I had a feeling the Bonneville kit was a rare one. The potential price of $200.00 is £150.00 GBP so it would take a brave man to have a go at a conversion that wasn't guaranteed to work! I will have a look round for MPC kits from '67 and '68, while I am sourcing Rolls-Royce Silver Cloud kits from Minicraft, Entex, Academy, Masterkit and Revell, maybe try a few resin body shell producers. I have moulded and cast two body shells successfully so far for this car that is 1955 -1959 only. I suppose the '66 GTO you mentioned is a different body altogether? David Like mentioned the 66-68 Big Pontiac annuals can be a little tough to find and expensive when you do. ( I just bought a decent 1967 Bonneville conv builder and paid just over $100 for it. With a cracked but easily fixed windshield frame. ,,,not for sale ) That said ,,, and for your intended purpose. A re- builder would obviously be the best route. And with the mods your intending. A less than mint body would be ideal. And considerably cheaper and easier to find . Do Like I do and set up search parameters on ebay to be notified when something is listed . Thats how Ive found the vast majority of my old annuals stash over the past few years. As far as the GTO, Yes its a completely different body style and size. But less expensive to come up with Quote Link to comment Share on other sites More sharing options...
El Caballo Posted December 7, 2017 Share Posted December 7, 2017 We had a '67 Executive wagon, I loved that thing. Quote Link to comment Share on other sites More sharing options...
Anglia105E Posted December 7, 2017 Share Posted December 7, 2017 Thanks Bill, Good advice and I shall have a look on Ebay over here to see what is listed, but can't afford shipping from USA or Canada, which can be twice the cost of the kit. David Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted December 8, 2017 Author Share Posted December 8, 2017 I've finally finished something on this project! The interior modifications include: The steering wheel, steering column, grab bar, & shifter gate section of the console came from the Revell '66 GTO kit. The console mounted tach was swiped from an old Johan kit. The dash pad was modified by adding a speaker grille & a pair of defroster vents. The window cranks & door latches were cast from Laser Bond & chromed with Molotow pen. Floors were covered with embossing powder & door lock buttons were added. All dash knobs & locks were drilled out & replaced. Other than that, it's all just paint & foil. Steve Quote Link to comment Share on other sites More sharing options...
Anglia105E Posted December 8, 2017 Share Posted December 8, 2017 Fantastic result on your interior Steve and I bet you're really pleased with that. You can focus on other areas of the build now I guess. I am finding myself using the Molotow Liquid Chrome pen more than BMF these days, even though I am a firm believer in BMF. David Quote Link to comment Share on other sites More sharing options...
Ron Hamilton Posted December 8, 2017 Share Posted December 8, 2017 Stunning!!!! Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted December 8, 2017 Author Share Posted December 8, 2017 49 minutes ago, Anglia105E said: Fantastic result on your interior Steve and I bet you're really pleased with that. You can focus on other areas of the build now I guess. I am finding myself using the Molotow Liquid Chrome pen more than BMF these days, even though I am a firm believer in BMF. David Thank you David. I only use the pens where it's not practical to use foil. I still have reservations about the durability of the Molotow ink. Steve Quote Link to comment Share on other sites More sharing options...
Slotto Posted December 8, 2017 Share Posted December 8, 2017 That is the most realistic interior I have ever seen! Quote Link to comment Share on other sites More sharing options...
kelson Posted December 8, 2017 Share Posted December 8, 2017 Exceptional work on the interior!!. Quote Link to comment Share on other sites More sharing options...
Perspective Customs Posted December 8, 2017 Share Posted December 8, 2017 54 minutes ago, Slotto said: That is the most realistic interior I have ever seen! Seriously! Quote Link to comment Share on other sites More sharing options...
PARTSMARTY Posted December 8, 2017 Share Posted December 8, 2017 That interior is simply amazing!!! Quote Link to comment Share on other sites More sharing options...
Snake45 Posted December 9, 2017 Share Posted December 9, 2017 23 hours ago, Slotto said: That is the most realistic interior I have ever seen! I believe, me too. Quote Link to comment Share on other sites More sharing options...
br67 Posted December 9, 2017 Share Posted December 9, 2017 Nice job there Steve Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted December 10, 2017 Author Share Posted December 10, 2017 I think that I have the engine figured out. I'm using the Revell '66 GTO basic engine assembly with the intake & valve covers from the MPC '69 Firebird kit. The air cleaner is an old annual kit piece from "who knows where" with a scratch made snorkel. Just need to find a half way decent carb. Steve Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.