Jump to content
Model Cars Magazine Forum

Luc Janssens

Members
  • Posts

    3,459
  • Joined

  • Last visited

Everything posted by Luc Janssens

  1. 1952 Hudson Hornet, by SpeedyO.K, I'll give it a go. 1.) What subject and why? 1952 Hudson Hornet This was one of the most significant cars of it's era. An engineering feat in it's "Step-Down" advertising and design. One literally stepped down to enter this automobile while the others were riding high. (Hmmm..a factory low-rider!) This factor offered excellent handling with it's lowered center of gravity. 2.)Target audience would be skill level two to advanced. Parts breakdown would be along the lines of AMT's 49 Merc. Remember, Hudson’ s were simple but effective cars. One could make the argument for marketing this kit as a convertible and include two optional tops to build a standard coupe or Hollywood hardtop version. That alone offers three building options from one tool. 3.) Chassis. These were uni-body cars and as such would be modeled along the lines of much later MOPARS. Posable steering, separate exhaust and suspension lowering options are a must. 4.) Drive-train. Separate parts for drive-shaft, differential and springs. 5.) Interior. Floor-pan, separate side panels and rear seat. Stock and custom dash. stock and custom seats, scale fuzzy dice for the rearview. 6.) Body. A clean and crisp one peice molding with separate hood. Bright work options to create'48 to '52 models. Custom parts include full fender skirts, lake pipes, frenched headlights,'59 Caddy tail lights, etc. Again ala '49 Merc kit. 7.) General. The engine in this kit offers one of the most powerful flathead 6 cylinders ever manufactured. Twin H (dual carb) production engines were 308 cubic inches and could and did give Rocket 88 Oldsmobiles fits. Wheels would be stock steelies with options for stock or custom wheel covers. Tires would be period wide whitewalls with optional later low profile tires. 8.) If the bean counters (get the shotgun, Ma!) object, I'd say chuck all the custom parts and just give me the basic kit! My imagination will take care of the rest. Maybe this will make my thoughts clearer.
  2. 1975-’ 76 Ford Gran Torino Sport, by D. Van 1) what subject would you kit, and why? 1975/76 Ford Torino 2 door. This is the famous Starsky & Hutch car. But it also is the first car NASCAR driver Bill Elliott drove in a cup race. The car also fits the new ‘ Mainstream’ theme of American cars. Very few Fords where modeled during this time frame. 2) Set your target audience, decide on skill level, parts breakdown and overall design. Wide target audience. This would mean a kit along the lines of the Revell ‘ Wheels of Fire’ Chevy Monte Carlo. I would like to see a 3 piece chassis with nice detail and separate simplified front and rear suspension clips. Body would be a showroom stock trim. An interior with separate side panels would make using it as a stocker would be simplified. 3) Do you want to include optional parts? name them, and why? Wheels and tires. Factory style Slot wheels with period BFG tires. Maybe a S&H stripe in decal and/or die cut stick on - or both as Polar Lights have done. 4) Are there alternative versions possible from that tool?, and if so, what parts can be used for both versions? I would sell it as a 3 N 1 kit. S&H Torino, Period street machine using a mix of stock and S&H parts and some stock wheel covers to build a mid range showroom Torino. The NASCAR guys would use the kit as a starting point as a Cup car. The bodies were very close to stock at this time but another chassis would need to be used for a contest model. If the modeler wanted a passable curbside stocker could be built using kit parts and some suitable wheels. 5) How do you want the packaging? I would see a box with box ART. A box showing a S&H Torino on a city street power sliding into a side street with a showroom stock Torino parked nearby. It would not need to be labeled a S&H Torino but rather a special edition Torino as labeled by Ford. 6) The bean counters went all over your little project and it seems the kit you're proposing slightly exceeds the budget, luckily you are in the planning stadium, so what do you loose, and why? About the only trimming that could be done would be losing the stock wheel covers or going to a one piece chassis. I would tend to go for the chassis first as the wheel covers are needed for the optional building versions. Going with only the decal or the sticker would help cost but not enough to make or break the project.
  3. 1981-87 Oldsmobile Cutlass Supreme 442, by Von Digger & Bill Austin A: 1981-87 Cutlass by Von Digger 1) what subject would you kit, and why? I would do a 81-87 Oldsmobile Cutlass Supreme. I have never seen a kit for this car and I am sure that it would make a very interesting build. 2) Set your target audience, decide on skill level, parts breakdown and overall design. It would be a skill level 2 and want to target builders from 18-35 years of age since from personal experience I have found that the cars appeals to all of them. - Chassis: I would want a chassis pan with the frame and chassis pan with molded in fender wells, and gas tank. - Drive-train: A Oldsmobile V-8 with A/C, P/S pump and Alternator and all the associated brackets backed by a 200r4 overdrive transmission. The rear end would be a standard corporate 10 bolt rear. - Interior: An Interior pan with moulded door panels. From there a seperate dash, steering wheel, a choice of either a bench or bucket seat, center console, oh yeah and a seperate back seat. The locators for all the interior pieces will be either snap style or fairly easy to glue to. - Body: For the subject that I chose to do, the main part of the body spans all the years in question. I would include the 2 different header panels so that it could be built as either an 81-86, or an 87. The 87 version had composite headlights and not the open lights like the previous 6 years. I would also include the headlights on the chrome tree as well as the 2 different versions of the tail lights. 81-84 had a chrome strip going through the center of the tail light from top to bottom, while the 85-87 had a Oldsmobile symbol in the center of the light. - General: nothing more than I can think of off the top of my head 3) Do you want to include optional parts? name them, and why? - Drive-train upgrades: I would include the parts to turn the 307 V-8 into a 350 Rocket Block for a possible street machine version. - Body add-on's: Possibly a 72 styled 442 hood with the twin ram air option. There have been a few aftermarket companies that made this hood for the 1:1 cars and they look attractive. - Interior options: As stated above, I would include factory buckets and a center console with a floor shifter. - Wheels & tires: I would include a set of aftermarket style wheels and "bigs and littles" for a street machine version. - Decals: Since the regular Cutlass had next to no real markings and what little markings they did have they also shared with their high end models, in which case would add the graphics to make it either a 442 or a Hurst olds. 4) Are there alternative versions possible from that tool?, and if so, what parts can be used for both versions? As stated above the main body can be used for all versions since the body remained unchanged in 7 years. 5) How do you want the packaging? -Box art: The car sitting in front of a dealership in stock form. Or the street machine version sitting at the local hangout. -Info on the box: I picture of the real car on the top of the box, with pictures of a build up on the sides. -Box vs. parts layout: I would want the model put in an average size box. -Packaging of the parts. I would want all the different trees packaged separately. The molded in color parts, chrome parts, clear parts and decals all in a protective bag, and or sleeve. 6) The bean counters went all over your little project and it seems the kit you're proposing slightly exceeds the budget, luckily you are in the planning stadium, so what do you loose, and why? First of all I would loose the optional hood. That would be basically another part to make a mold for, albeit small, but still costly and timely. Next, I would mould the center console into the floor-pan of theinterior and get rid of the bench seat. This would combine a few parts in one as well as delete a few other parts from the mix. Lastly I would probably drop the 442 option from the decal sheet and leave only the Hurst Olds option. B: 1987 CUTLASS by Bill Austin Why: There is no kit of the 1981-1988 Cutlass coupes available. It was a very popular automobile with some popular performance models, including 442’ s and Hurst/Olds versions. It is a favorite for restorers and low-riders, coming in a wide range of interior types: fairly basic, vinyl or leather buckets, and even the plush “pillow” seating of the Broughams. The 1987 was the last of that body style to be a 442, and it had the flat-face headlight modules instead of the four individual headlights of the earlier models. Target audience: 442 fans, Cutlass fans, Oldsmobile performance fans, muscle car fans, low-rider fans, and (with future models in mind) Hurst fans. Skill level: 2 Parts and design: A kit at the general level of the Revell ’ 87 Buick GN and ’ 87 Monte Carlo SS Aero-back kits, with the nose piece a separate part like the 1:1 car to allow easier future or aftermarket conversion to a different year model with a different nose piece and grille inserts. The interior should have separate seats and sides to allow for inexpensive changes for future release variations. The parts that would be different in future releases should ideally be isolated on separate trees from the remainder of the kit, minimizing tooling costs for variations. It would have the 442 H.O. Olds 307 cu. in. V8, the 4 speed manual transmission, the steel sport wheels, performance tires, bucket seats, console, and emblems. It would have decals for the body accent stripes (in several original colors, if possible), 442 labels, engine compartment labels, and dash layout. The kit would use white plastic to avoid bleed-through problems when painted. The clear parts tree would be in a separate bag to avoid scratching. Optional parts: I would include slapper bars, with wide and skinny tires that fit the stock wheels for a mild drag or street custom version, but would keep costs down by not including any other major optional parts in this kit, but rather design it from the beginning to be released later as a separate kit with different options like the AMT ’ 66 442 W30 and ’ 66 442 Convertible kits were. If costs allowed, some of them might be included in this kit (see versions below). Alternative Version Number One: 1985 Cutlass Supreme Brougham. This kit would have the early nose style with the four individual headlights and the appropriate separate grille grid inserts, the V6 engine, an automatic transmission with column shift, the “pillow” seats interior with the split bench front seat, wire wheel covers, white wall tires, and the body would have the partial (back only) vinyl roof and chrome rocker panel trim either as part of a revised body or as add-on parts. This should be a favorite of the low-rider fans and if costs allowed, it could include parts for a lowered or adjustable suspension. See all-out “hopper”version below. Parts from this kit and the first kit would allow mixing and matching for a great variety of combinations. Alternative Version Number Two: A “Special Edition” release, the 1983 Hurst/Olds 15th Anniversary coupe. It would mainly have parts from the previous two kits, but it would have the automatic transmission with a console and the “lightning rod” shifter. It would have appropriate grille inserts for the four individual headlights nose, a bucket seat interior, and the steel sport wheels. The decal sheet would have all the stripes, labels, etc. of the Hurst/Olds. If the automatic transmission and console were included in the original ‘ 87 442 kit and the ’ 83 grille inserts in the original ’ 85 kit as optional parts and the parts trees of those kits were properly allocated, there would not have to be any new tooling for this kit, just a different assortment of existing parts trees. The only new thing needed would be a decal sheet with the Hurst/Olds stripes and emblems. Alternative Version Number Three: An all-out low-rider “hopper” version of the Supreme Brougham, with an opening trunk, speakers, hydraulics, etc. The chrome tree might be done in “gold” for this one, with low-rider style wheels and tires. This might even be one of those that actually hops. Some wild “scene” graphics on a decal sheet would be a nice item, too. Alternative Version Number Four: A Speedway/ NASCAR type race car variant. I think A.J. Foyt drove a Cutlass of this body style for a while. This would be easier for a kit maker that already has an appropriate race car kit and would only need to use the body, with appropriately redesigned nose and tail pieces like the 1:1 race cars and a decal sheet with the needed graphics. Packaging: Each kit should have a beautiful picture of a 1:1 car on the top and ends that can be built from the parts in the kit, a picture or two of a built model on one side, and on the other side a list with pictures of the key parts included in the kit but not visible in the main pictures: engine compartment, interior, chassis, and optional parts. This would encourage multiple kit purchases to get the exact combination of features/options someone wanted. The instruction sheets should be clear line drawings and TESTED for correctness, including parts numbers and build sequence. Exact information for decal placement should be included. If the bean counters want to cut back something: Leave out the extra tires and slapper bars in the first kit. If that is not enough, use generic tires instead of correctly branded ones. If that does not do it, forget about separate interior sides and have just the front seats separate. Wait on final tooling of the second kit until the first kit sales are established, but have the parts trees contents allocated to allow the versions discussed above.
  4. 1965 Mercury Comet Cyclone, by Jeff Corey Chassis- Platform style uni-body chassis with separate suspension and exhaust parts. Drivetrain-289 K-code Super Cyclone 4bbl equipt'd small block Ford and optional Cobra style B/FX webers. Optional engine would be a 427 Cammer for an all out match race early funny car. Interior- Would be factory stock buckets w/ console, separate door panels and dash. Perhaps a basic roll bar hoop set-up for the option racin' build version.Body-The Cyclone body style was a very clean design that lacked alot of extra stainless or molding trim, this would make it a BMF'rs dream, plus would keep the chrome tree parts cost down to a minimum with only front and rear bumpers and a few assorted other parts done in bright chrome. The hood would be searate with the racy twin snorkel openings in the leading edge. Red styrene lenses for the taillights. A small PE fret with Cyclone scripts and flags and grill trim would be nice if affordable in the mix but if not then the body molded versions would suffice. Wheels & Tires- A set of snap in whitewalls and also an insert in black for the black wall look, period correct bias ply polyester cord tires and a set of cheater slicks for the racing version. Wheels would be the cool simulated chrome reverse caps the Cyclones used with open lug nut holes that a plate of lug nuts would attach from the back side to give the effect just like the real car used. A set of Cragar S/S or American Racing Torque Thrusts would give it some nice street or strip presence for contender look. Decals- Some under hood decals for the "Cyclone 289", and a dash gauge insert. Some Rotunda Ford parts service items like battery, etc would be welcome. General- This would be a nice kit to do along the lines of the new kits comin' from Polar Lights of the GTO and '65 Coronet and would tie into that era of muscle car very nice. A 2n1 with a skill level 3 if the PE was included but if the costs run too high then a drop to level two with the appropriate deletion of building versions and extra parts. Packaging would be in a sturdy box, not donut boxes please! Full color shot and and alternative drag version photo on one of the end’ s. Car will have to be red for eye catchin' appeal to the consumer. Instruction sheet features well done graphic drawings with color specs. If deletions need to be made to make the budget, I would drop the Cammer engine, slicks, the PE fret. Mold the hood shut and go with a basic curbside with an separate engine plate like an AMT promo used for the underside. And in closing, if there is anyway that this budget can include the services Of John Mueller to make it all happen and get it right on in the look and proportions that is a must! If his work on the new PL GTO & Coronet are any indication of his new vision, I'd want him in on this one as well!
  5. Not sure on this one.....cuz dunno much about Hot Rods, you be the Judge 1929 Ford Roadsterby Darin "Ashvillemodeler" 1) what subject would you kit, and why? 1929 Ford roadster. This is a very popular street rod subject, and the current AMT issue cannot be built into a modern street rod with out extensive modifications and extra parts 2) Set your target audience, decide on skill level, parts breakdown and overall design. This would be marketed as a 1:25 scale skill level two kit. It would be very detailed but easy to build. It would be made with the floor pan separate from the frames and the interior would have separate seats, and side panels. The roadster specific parts would all be on the same tree as to make it easier to change body styles in later issues. The fenders would be separate from the body. A traditional street rod suspension. Tubular dropped axle, and a chrome Halibrand quick change rear end. All stock trim would be included along with some billet accessories This would be a street rod only model. the overall parts count wouldn’ t be higher than the current Revell rat rod but would be of higher quality, and IMHO more desirable 3) Do you want to include optional parts? name them, and why? The engine in the kit would be a cobra style small block Ford with Webber carbs, because there isn’ t a modern version of that power plant in any current kits. (just about any other induction system is available in scale so kit bashing different set ups would be easy.) you would have a choice of either a 4 speed manual or a modern ford automatic tranny. There would be an optional ’ 32 ford frame, designed with cross braces that would allow the same exhaust and accessory placement as the 29 frame. There would be an optional independent rear suspension (chrome plated) that would be stand alone, meaning that it could be built separately on its own cross member and dropped into the frame. Not only would that make it easier to install in the kit but would also allow it to be used on other models with out rendering the donor kit un-buildable. There would be three sets of wheels and tires. One set of well done Kelsey-Hayes wire wheels with photo-etched wires, with big and little 50 style rubber. There would also be a set of “Lil’ John Buttera Style” Champ 500’ s with BF Goodrich comp T/As. Third there would be a set of modern Billets with low profile 17 & 18 inch tires. Also included in the kit would be two optional grill shells a track nose and deuce grill. There would be a second set of head lights similar to the ones on the Doane Spencer deuce. There would be three different hood sides, stock, custom louvered and smooth. 4) Are there alternative versions possible from that tool? Well lets see....29 woody. A sedan, a sedan delivery, a cabriolet, phaeton, four door sedan , pickup, roadster pickup, a phantom B-400 just to name a few. Not to mention someone could take the original kit and build it at least ten different ways. 1. track roadster 2. rat rod 3. Lil John butteras silver roadster 4. a 29 on duece rails 5. a full fendered resto rod 6. a modern high tech low boy 7. a 50’ s style highboy 8. an 80’ s style billet rod 9. a lakes modified 10. 60’ s style full fendered rod 5) How do you want the packaging? (box art, the packaging of the parts etc..) the glass and the chrome would be packaged separately and away from the other parts. The wheels and tires would be packaged separately Tamiya style the box art would be spectacular with art work on the front commissioned by Tom Fritz. The ends of the box would be photo’ s of the assembled model on one side pane there would be a photo gallery of the different options and on the other side there would be a description of the contents and an actual size side view of the model (like MPC used to do) When and only when you have an answer to all these questions, try to solve this one ;^) 6) The bean counters went all over your little project and it seems the kit you're proposing slightly exceeds the budget, luckily you are in the planning stadium, so what do you loose, and why? After crying whining and pitching a fit...I would loose the photo-etched pieces but leave the parts designed in such a way that it would be easy to convert back later. And send the art to Bob at “model car garage” and if I absolutely had to I’ d give up the optional tranny.
  6. 1970 Plymouth 'Cuda Coupe by Viper Dave 1) what subject would you kit, and why? I would like to see a correct 70 Cuda coupe. It would be a 3-n-1 or 4-n-1.kit. The Cuda was Chryslers first attempt at a real pony car. They had the Barracuda before but is was a warmed over Valiant. It was also the top of the Muscle car era. You could get everything from the 6 cyl to the 6 Pac and then the HEMI. Anyone who was raised in that time of automotive history remembers the Hemi. The 71 Cuda has been out for a long time but the 70 was really the best one to do. I will have to say I am a little bias because of being able to work on and drive the Dan Gurney 25Trans am Cuda. The AAR Kit that was out was a joke. Nothing looked right on that kit. I think it is time for an ADULT kit for the serious builder. 2) Set your target audience, decide on skill level, parts breakdown and overall design. This kit would be a level 3 kit for adults. It would be for the serious builder and could be built several different ways. a) The stock Hemi Cuda coupe. 4 speed, Rally wheels, Hockey stripes and Shaker hood 2 Stock AAR Cuda. 340 4 speed correct stripes with the correct spacing of the strobes. Correct different front and rear tires. c) Dan Gurneys #48 AAR Cuda Trans am racer. Minilites, racing seat, roll cage, and the engine breather system d) Drag racing version. Either the Hemi or 340 engine could be used. The Kit would be done with the interior build on the chassis with Side panels, firewall and seats separate. The parts would be designed so that other versions could be done later and the parts that needed to be changed would be on the same tree. 3) Do you want to include optional parts? name them, and why? Optional parts would just be those to make the 4 versions. 4) Are there alternative versions possible from that tool? Later versions like a convertible and Gran Coupe could be offered. 5) How do you want the packaging? (box art, the packaging of the parts etc..) The box top would show a different version on both ends on one side. The box top would show the versions of the real cars. Chrome and clear parts would be in clear plastic bags and the tires and decals would be packaged separate too. 6) The bean counters went all over your little project and it seems the kit you're proposing slightly exceeds the budget, luckily you are in the planning stadium, so what do you loose, and why? If it went over budget then the drag racing version would be dropped and later put in the revised versions.Final impression. This kit would be priced around the $20 range and would be aimed at the Adult modeler and be marketed that way. The instructions would have pics of real cars like some I have seen before. Thank you Viper Dave
  7. 1968-'72 Ford F-150 by Talk Show Mercenary 1) what subject would you kit, and why? 1968-72 Ford F-150 shortbed fleetside 4x4 pickup. These trucks are one of my favorite Ford truck body styles, yet model kits representing them are sadly lacking from the shelves! I would elect to do the shortbed 4x4 to make this model rather unique, and because that's the way I'd want a 1:1 example to be configured! 2) Set your target audience, decide on skill level, parts breakdown and overall design. The target audience on this kit would be wide ranging. Everyone from pickup modelers, to 4x4 and off road enthusiasts, commercial modelers, Ford nuts, and anyone looking for a late 60s/early 70s tow vehicle to haul around their favorite 1/25 scale race car, boat, or whatever! Kit design would dictate a detailed four wheel drive chassis and suspension, and a detailed 300 cubic inch inline six with manual transmission. Not that a V8 wouldn't be cool, but including the beloved 300 Ford six banger in this kit would guarantee sales to even more modelers who wish to rob this popular powerplant for other modeling projects! A nice rendition of the tough Ford engine would include power steering pump detail, separate oil pan, oil filter fuel pump, manifolds, carb, air cleaner and starter castings to make the mill worth the wait to eager hobbyists! The body would include a bed formed much like the modern AMT pickups have been, being a whole casting minus tailgate and tail lights, which would be separate pieces. The interior would feature hanging brake and clutch pedals, and a separate gas pedal to mount on the floor, rather than a 'drawing' of the pedal cast into the carpet! A stock bench seat and big steering wheel would also be included, as would a column mounted manual shifter, and a floor mounted transfer case shifter. The truck would sit at stock height and would include stock wheels with all terain tires. Underhood detail would include radiator, horn, master cylinder, heater box, wiper motor, and steering shaft/box castings, as well as upper and lower radiator hoses and plastic heater hoses. 3) Do you want to include optional parts? name them, and why? I'd like to include a slew of optional goodies in this particular kit. The popular off road options, such as raised suspension pieces, aftermarket wheels, bigger tires, push bar, off road lights, CB radio and antenna, roll bar, gas can, spare tire, CJ style hood scoop, exhaust header, four barrel intake manifold and carburetor, mud flaps and tool box. Such items would allow for several building options, and would help to sell this kit to a more diverse crowd. 4) Are there alternative versions possible from that tool? A two wheel drive version, as well as stepside and longbed variants could easily be added to the line-up by adding different bed, frame and suspension castings to the existing tool. 5) How do you want the packaging? (box art, the packaging of the parts etc..) This box would be slightly oversized to accommodate all those optional parts, and to allow the attractive box art illustrations to grab the buyer's eye! The front of the box should show a painting of a 1:1 F-150 4x4 in an off road setting that harkens back to the early 70s, and photos on the sides of the box should show built-up prototype models with underhood and chassis views included. Parts would be packaged in clear plastic bags with detailed instructions and a large decal sheet with early 70s style bumper stickers and other decals to give modelers a chance to build a retro 4x4! 6) The bean counters went all over your little project and it seems the kit you're proposing slightly exceeds the budget, luckily you are in the planning stadium, so what do you loose, and why? I'd lose SLEEP...trying to decide what to cut! I suppose I'd sooner whack some of the optional parts and maybe the vintage looking decals, but I wouldn't cut corners on the detail of the chassis, engine, body or interior!
  8. 1987-'93 Ford Mustang LX Sedan by John K. Dezan 1) what subject would you kit, and why? This one hit me last night while watching TV. I'd kit the '87-'93 Ford Mustang LX 5.0 sedan SSP a.k.a. police package car. This car is still popular with muscle car enthusiasts even though it's been gone for 10 years. It's also the Ford that chased Porsche's for a living. 2) Set your target audience, decide on skill level, parts breakdown and overall design. Target audience is the muscle car enthusiast, Ford fan, Mustang person and the police car/light commercial builder. That presents a wide swath of skill levels so I'd doing along the lines of the Lindberg '97 Crown Victoria. A snap kit with better than average engraving but it would have to have an engine under the hood which Revell has done with it's snap Vipers and the Caprice/Impala. The kit would have to have all the appropriate police equipment for the agency offered and most Mustangs didn't have a lightbar so that's a few less parts than the average police car kit. 3) Do you want to include optional parts? name them, and why? I can't think of any. 4) Are there alternative versions possible from that tool? Alternates? You betcha! The car could easily be offered as a civilian LX 5.0 simply by leaving out the police gear and then you could go after the muscle car guys by offering alternate wheels & tires along with some aftermarket parts like a Borla exhaust and or a K&N FIPK. 5) How do you want the packaging? (box art, the packaging of the parts etc..) A CHP mustang at speed on a Cali. speedway chasing a Porsche like it's supposed to do. 6) The bean counters went all over your little project and it seems the kit you're proposing slightly exceeds the budget, luckily you are in the planning stadium, so what do you loose, and why? I suppose that we could loose the police goodies and simply offer it as a civilian LX 5.0. The model aftermarket has all the stuff that's need to turn it into a police car. John
  9. 68-'72 Chevy Nova by John K. Dezan 1) what subject would you kit, and why? I propose a brand new tool of the '68-'72 Chevy Nova. Why you ask? AMT's tool is ancient and those separate fenders are giving me headaches! If they're causing me problems, can you imagine the trouble they could give to young people just starting out? Now. The Nova was offered in several basic versions all of which could be easily offered from this one tool. AFAIK, the only real difference between the various years is the seat patterns. Which would I start with? A '70 Yenko Deuce. Some of them had fenders lovers and all of them had the hood mounted tach which means a total of three year specific parts aside from the interior. Then there's the engine which would have to have all the proper brackets and etc. Decals must be support whatever version is chosen. A Deuce isn't a Deuce without it's stripes after all. 2) Set your target audience, decide on skill level, parts breakdown and overall design. Target audience would be anyone who can or would like to put a kit together. In other words, skill level 2 with a parts count of 120-150 parts. Mold lines should be placed where they can be easily removed(edges of the parts) and I'd like to see the sprue moldings for the wheels not on the edges of the outside rim. AMT did this one their “95 Ram pickups and I applaud them for doing so. 3) Do you want to include optional parts? name them, and why? Oh boy! Optional parts. The optional parts would depend on just which variant of the car that's done. There were three different hoods available on the model interesting Novas - The base hood, the SS hood and the "Stinger" hood. Engines are another possibility. It all depends on which car is chosen to start with. 327, 396, 427 and the '70 LT1 were all available from either the factory or the supercar tuners like Baldwin Motion, Yenko and Harrel. Photo etch for the various scripts would be real nice but it would probably add to much to the price of the kit. Model Car Garage to the rescue! 4) Are there alternative versions possible from that tool? Plenty of alternate versions are possible from this one tool as I stated earlier. It can be offered as a mild '68 327 to a '68 Harrel/Gibb 427 to a '69 SS396 to a Yenko or BM '69 427. Tochange our intrepid Deuce into a '69 Yenko 427 would require new seats from and rear for the interior and a new engine which Revell already has the tooling for from their excellent '68/'69 Corvettes although they would have to give us a proper air cleaner as neither the tri-power nor the L88 style would be correct for this version of the engine. The '69 BM 427 could then be made simply by changing the hood from the base hood to the "Stinger" style. Yet another '69 could be made in the form of a SS396. Change the hood to the SS version and voila! A '68 Gibb/Harrel 427 is virtually identical to the '69 BM 427 except for the interior. 5) How do you want the packaging? (box art, the packaging of the parts etc..)</font></b> Box art should show a nicely restored version of whatever car is in the box. I have no complaints with how Revell is laying out the sprues so I'd leave that up to people who know more than I. 6) The bean counters went all over your little project and it seems the kit you're proposing slightly exceeds the budget, luckily you are in the planning stadium, so what do you loose, and why? My plan is very tightly focused so I don't see any parts except for the optional photo etch that I don't see how any thing else could be left out without compromising the kit. The adult enthusiast will buy the kit to do many more things with especially if he can get support from the aftermarket like the photo-etch scripts. For example. The Canadian Acadian was basically a "Northern" Nova and could be built from any of the basic kits.
  10. Another one from 2002 03 Ford Focus SVT (by Yoda) 1) what subject would you kit, and why?'03 Ford Focus SVT; "Tuners" are hot now, and with the factories involved we may be looking at a new horsepower race. I'll bet on being in on the ground floor... 2) Set your target audience, decide on skill level, parts breakdown and overall design. My target market....Wally's purchasing agent! Seriously, why not an old-fashioned kit of a modern subject? Simple, one-piece chassis with metal axles, but with opening hood and engine like the old AMTs (no Hole In The Block though- isn't FWD great?) Clear lenses for all lights, everything you'll see on the built will be well-detailed but the overall kit will be simple. Molded in (non-bleeding) color, ages 10 and up. Engine and chassis molded in black. 3) Do you want to include optional parts? name them, and why? "Custom" version #1 would be the Euro ST120, complete w/RHD dash. I think those headlights, grille and bumper will show up on a lot of custom Foci in the US, and it'll also be a hedge in case Ford gives our Focus a similar restyle. I'd include all the usual tuner parts- fresh air intake, big exhaust, extra wheels, choice of 2 body kits, but unlike R-M's Integra I'd make the stock wheels the correct size and throw in the extra tires. And the decal sheet will be huge! 4) Possible alternative versions for the tooling. Alternate versions- how about a wagon? Or a ZX5-that might be doable with inserts alone. Then there's the Focus RS.... 5) How do you want the packaging? (box art, the packaging of the parts etc..) Packaging- Illustrated "cover", with sides showing a (well) built kit. 6) Over-budget issues: Cuts- only one body kit, no RHD dash (but I'd keep the other Euro stuff for the above given reasons), one set of tires if I really MUST, but then I'd make the custom wheels the same size as stock. '03 Ford Focus ZX3 (by John K. Dezan) 1) what subject would you kit, and why? I'd kit the Ford Focus ZX3. It follows the current Revell kit trend of "Hot Hatches" and the 1:1 car is popular with the younger generation that likes to "tune" their cars. This is a growth area and the model companies have been slow to catch on so there's plenty of room for growth in this area. 2) Set your target audience, decide on skill level, parts breakdown and overall design. Target audience is the late teens-early 20 some things that are drawn the "Hot Hatch" segment. These are the people we need to draw into the model car hobby for our future success. They've got to have kits available of what they consider cool. Skill level 2 with the target being the recent Revell Acura Integra in parts count. The parts should be engineered with as few mold lines as possible. If you can't eliminate them, than place them where an inexperienced modeler isn't likely to notice them or when they can be easily removed. The body should be molded as cleanly and evenly as possible. The less work (clean up of mold lines and sink holes) the target audience has to do the better Clear parts should be molded evenly perhaps with full side windows just to be different. Chrome isn't a big part of the Focus so it should be kept to a minimum - head and tail light buckets, side view and rear view mirrors reflectors and possibly a set of wheels. 3) Do you want to include optional parts? name them, and why? Optional parts should include a set of aftermarket tires and wheels. Perhaps a set of Enkei or Motegi wheels with some low profile rubber that would typically be seen on a day 2 Focus. A K&N FIPK under the hood would be nice as would an optional ground effects package. There are more parts and ideas but the first idea has to sell before we'll get into those. If we offer three sets of wheels then there should be three sets of tires too. The decal sheet should feature the logos of the current aftermarket car parts suppliers - Borla, Pioneer, Recaro etc. versus Champion and the ones that the older generation can identify with. A set of heavily tinted windows could also be included as most "tuned" hot hatches have their windows tinted. 4) Possible alternative versions for the tooling. Alternate versions include the Focus SVT and a full on "Tuner" version possibly with a tie-in with an aftermarket supplier like Wings West. Alternately, the Wings West Focus Avenger could be included as the optional bodywork in the original ZX3 kit. These versions should be released as soon as financially possible. Although the "Tuner"/"Hot Hatch" segment is hot right now, we can't say when Ford will restyle the Focus. This body style will continue to be popular for some time after Ford restyles that car but that isn't likely to last forever. 5) How do you want the packaging? (box art, the packaging of the parts etc..) Box art should feature a photo of the actual car on the top. However, if we were to do the Wings West car, then it should be on the top. Alternate versions can be featured on the other sections of the box. These should be built up models showing the other ways that you can build the kit. All parts should be bagged. The stock ZX3 in bright yellow would make for a striking box art car. The Wings West Focus is totally outrageous and should it be featured on the box top it should be as a drawing with the car smoking it's front tires from a stop. 6) Over-budget issues: Over budget? Ditch the aftermarket stuff . Modelers are a inventive sort who could and would buy Integra kits to scavenge parts out of to customize their Focus (Foki?). We can always put them into the SVT version. John
  11. The following proposal was made in 2002, and was announced to be kitted a few weeks ago. 1965 Ford F-100 (by Bob Core and Will S.) 1) what subject would you kit, and why? 1965 Ford F-100 (short wide box). Last of the old pickup platforms that hasn't been kitted in the last 20 years.(well, there's the '57 thru '60 F-100 and it would work as well). 2) Set your target audience, decide on skill level, parts breakdown and overall design. The core (NPI) model hobbyists would buy it; the Wally-World crowd likes old pickup trucks; the rod/cruiser crowd also digs them (lowered with Aspen / Volare front ends). Skill 2, part count and engineering on par with the Revell '64/'65 Chevy pickup kits. Single version kit as well. 3) Do you want to include optional parts? name them, and why? No optional parts for the truck itself, but maybe a few accessories to put in the back like crates or yard tools, Throw in some bush bars and a rifle rack. Heck, even a Remington Pump Shotgun for the rack. The kinds of things someone would have put in the back of a new pickup in 1965. Maybe a circa 1965 Quarter Midget (simple, though!) and loading ramps to pay homage to the go-cart included in the old AMT annuals. 4) Possible alternative versions for the tooling. After the initial run, blow out a really well detailed 4 WD setup to put underneath it. The whole 9 yards. Axle, X-fer Case, shafts, white wagon style wheels with off road meats. This kit could become the Opel Blitz of half tons. short and long bed versions, with a custom flareside and lowered suspension, as well as a rep stock long bed. Kit-bash to your heart's content! (Pro-Street, In-the-weeds Street Machine, '60s custom, Bonneville push truck.) 5) How do you want the packaging? (box art, the packaging of the parts etc..) See number three.
  12. Wayne, I'm gonna post those which made it as a model kit....did the 250K Question made it happen, dunno, your guess is as good as mine.... Here's the first one, a proposal made by Tom Mooty back in 2001 87-'93 Ford Mustang LX ( by Tom M.) Actually I am torn between two subjects and if the scenario were real I would probably build models of each and clinic them before investing the money. My top two at this time are the’70 GTO and the ’87-’93 Mustang LX notch. I suspect the Mustang would “clinic” better than the Goat, so I will assume for the purpose of this exercise that the Mustang is my choice. Therefore, my choice is: 1) Modern muscle over classic muscle, and I picked the LX for its appeal to the younger set as well as to adult modellers. Also, I think it is a subject that lends itself to several drastically different building options such as police interceptor and Pro-Street/Pro-Touring. 2) My target audience is the 12-40 year old modeller of moderate skill. This subject matter has some chance for distribution through the generic-Mart channels so I need to keep my retail price under $10.00 and my parts count under 120. No fiddly fits or complexity just for complexity’s sake. 3) Absolutely. At least two sets of wheels/tires, a factory stock set of ten-slot alloys and a big-N-little set of Drag-Lites and appropriate rubber. I see the three biggest niches for the initial release as rep-stock, street machine/drag, and police interceptor. Those wheel/tire combinations will satisfy all three markets. I also want to include a Vortech supercharger set-up and a platform-style interior that allows inclusion of an optional generic 6-point cage and rear-seat delete. 4) Later versions could include a dedicated police cruiser (maybe a pre-decorated one in generic black and white) and a Saleen. Further down the road could be a modified reissue with the hatch body if the platform interior was properly designed to accommodate this option in the future with minimal revisions. 5) I think a photo from one of the Mustang shootouts would look killer on the box top, preferably two coupes at the 30’ area of the track, front wheels in the air. A stock-appearing notch with a “VORTECH” windshield decal could be photo-shopped into the background, parked with people watching the race. Side panels would have photos of the actual kit’s building options. After the Finance Dept. reviewed my tooling bill and told me to cut some features, I would grudgingly axe the 6-point cage and consider making the big-N-littles from styrene instead of buying a new tire mold. I might consider making the decal sheet smaller, also. Omit the generic police shields and 911 decals, and consider dropping some of the speed equipment decals as well
  13. Hello Wayne, At the time (2001-2004) I ran it on the Hobby Heaven board, one of my closest friend worked at a model company, and printed it all out, so the R&D team could asses it. The format was created by me, with much help from a retired model kit designer, a Kat, who also is a close friend. I will list a couple of projects which made it as a model kit, but I can't acknowledge if the 250K question was the instigator or confirmed those subjects were good picks. Also at the time the automotive hobby market (in the USA) was very much dictated by Walmart, versus now, where there's much more a balance between hobby enthusiasts and the "weekend modeler" (WM), and while the ROI is still largely carried by the latter, enthusiasts get more say in the picking and also help making the content of subject much more appealing...which I'm sure the WM will appreciate. As said I will post some of the past proposals later this weekend...uh...make that sometimes next week, I'm just back from a classic car show in Brasschaat.... Luc
  14. Wayne, There have been times, I felt the same, maybe it is because we gave up, fighting for something we would really like, that is... voice your opinion on an until now, overlooked subject... Am I trying to get you on board? Youbetcha! Thanks Luc Janssens
  15. You look at it as it were a job, it isn't, this a challenge, a show case of ideas to let the world know what we as car modelers want and how. Will something come from it, great ideas always get picked up, and also think ballot stuffing isn't that much of an issue on FB, don't see anyone creating extra profiles for such purpose, Ha! It's good that you are concerned and maybe a bit cautious, before committing to something which will be time consuming, when researching and writing your proposal. Please give it a try. Thanks Luc Janssens
  16. No pain no gain Bill. BTW Gregg isn't paying you for your input here, so why you don't share your expertise with fellow modelers and come up with something which I'm sure will be fantastic. I dare ya, ha! Serious, Bill...give it a try.... Thanks Luc
  17. Jonathan, The reason I do this is because there are some great ideas floating around, which most of the time get lost whenever a poll is organised, because you only see listings of possible subject matter, like a '78 Chevy Malibu, for instance but never the idea or vision the person had when he wrote it down, like for instance a drag racer, with.... Also when reviewing new kits i see people write why did they again put a SBC in it and not a Firedome (or so), then you see too bad they didn't included that option, and hey that's an aftermarket center console in that kit, can't those people at model company x,y, z do their homework!!! So here is your chance to take control, and write down an essay of something you always wanted and try to sell that idea to the model companies, who I'm sure will read this and will compare with data they have. Also you don't have to know everything there is to know about a certain subjects, fellow modelers will step in and correct mistakes and add their view maybe expanding the marketability of your proposal. To end with this isn't sole for USA cars, lets make this a WW thingy, FB was meant to unite people. Anyway have got to go, now....
  18. 4) Packaging and support Boxart: I really like the way Sean Svendsen handled the Model King box designs of the '70 Wildcat and Camaro Funny Cars. He really knows how to present a built model, so I would put him in charge of that, but I also like the art work of Jairus Watson and know he would do a good job of a CHP unit burning sideways (showing off the "Wolfs Head" graphics on the door) through a sharp curve on Mulholland drive, in hot pursuit of some bad boys, Hmm...maybe I have to flip a coin The size of the box would be like the "Accurate Miniatures" Corvette kits, to show off the artwork and the neatly displayed contents when removing the box top. Packaging of the parts: chrome, clear parts, tires, packed separately in poly bags, same for the white plastic parts, decals by Cartograph covered with a protective paper and bagged too. Instruction sheet: I like the approach AMT/ERTL took in the mid 1990s, which was very detailed and every part was clearly identified. Consumer support: On our company website I would post a whole range of photos taken when the engineers of product development were measuring up the cruiser, together with anecdotes, facts and fiction of the subject and the agency it served with. Also a photo composing as per instruction sheet sequence would be available on line together with tips on how to build a perfect model. 5) Budgetary constraints I would lose the metal transfers, and engrave the side molding into the cavity of the body sides, is a too simple solution for the cash problem, therefore I would get in touch with a die cast manufacturer (like Highway 61) to see if the project is of interest to them too, because the majority of model car collectors are not modelers, if they're interested the R&D costs would drop considerably, and could start a long term partnership 6) Post a photo of the subject Photo courtesy of HMM For more photo's of this beautiful restored vehicle, please check out the Hemmings Muscle Machines article via link below. https://www.hemmings.com/magazine/mus/2007/05/1969-Dodge-Polara-CHP/1451907.html Note: The book "Dodge, Plymouth & Chrysler POLICE CARS, 1956-1978" by Edwin Sanow and John Bellah, Motorbooks International was used for reference.
  19. 3) Design of the kit & tool: Finding a pristine example will not be a problem in this case, because Hemmings "Muscle Car Machines" Magazine recently did a restoration feature on one. Likewise for someone to measure and photograph it, because it's in Tom Montgomery's (Former Amt/Ertl kit designer) back yard! Body: Four-door body of course with fine and sharp engraving (Don't you love the window surrounds on a late 60s Jo-Han annual?) and without heavy molded-in features. For example, a dome light which can lead to a sink mark in the roof, which the modeler has to fill and sand. Small ridges and holes where to drill in the roof for roof mounted emergency lights will do. Because this car has seen service in many agencies, it would be handy to either offer the side moldings as separate metal transfer pieces (like Galaxie LTD's 1948 Chevrolets). This may not be feasible and could be a possible giveback when running into budget issues, but since it's a thin molding to begin with, it probably can be sanded off with relative ease when molded-in. The body closings will only consist of the hood dressed up with a separate lip* and hinges, in case the builder wants to show off the engine. The following items round up the body assembly: firewall, inner fenders (as with Amt '68 RR), radiator brace, side mirror(s)*, door handles*, front bumper* with separate grille* (to ease the detail painting) with clear headlamp lenses, rear bumper*, tail lamp-surrounds* with a perimeter flange to reinforce them and provide a gluing surface to mount them into the body and provide a stop for the rear bumper, and clear tail lamp-lenses of course (* indicates chrome part). Interior: The plain-Jane base level trim all around interior, would be a sort of snap-fit platform style, minimizing the risk of getting glue in unwanted places. Consisting of a floorboard with a two piece dash, steering wheel and column with molded-in selectors, separate pedals, two piece bench seat, separate rear seat with package tray (flashed over holes for mounting the two CHP flashers), separate door panels to allow for easy detailing. Police radio set-up for the transmission hump. It can be similar to the Jo-Han Plymouth set up, as that was very accurate. However, having separate pieces for the radio, siren control and switches would be great so that different set-ups can be configured by the builder. Two detailed microphones are needed; there was only one in the Jo-Han kit which was incorrect for the set-up. Chassis and drivetrain: Breakdown similar to AMT's 1957 Chrysler 300 or their 1960 Galaxie kit, 440 4bbl (what else!) with Torqueflite 727 Auto Trans. This police engine was rated at 375 HP. Kit should include two air cleaners, one stock and one low restriction. The low restriction is the police unit, and is similar in design to the one in the Lindberg 1964 Dodge 330 kit. It's actually referred to in the Dodge literature as an "unsilenced" air cleaner. Separate chassis, heavy duty rear end, dual exhaust, and front and rear sway bars round out the chassis. Wheels: two sets...one needs to be correct steel wheels with dog dish hub caps of correct vintage. I'd include a base series full hubcap as an option for those doing a standard sedan. Tires need to be a beefy vintage blackwall, Goodyear Polyglas or similar. The ones AMT has been using for years are actually pretty good. Accessories: Here's where it gets tricky. The Jo-Han Plymouth was actually a great kit for the roof lights alone. They were extremely accurate and looked the part. This kit should be done with that in mind, optional roof light set-up* for multiple agencies. Spotlights* for both sides are a must. Two styles of beacon lights, one like the Jo-Han, which is a Federal model 176H and one a flat top 4 beam (Federal 184, Dietz 211 or similar). The roof bar with twin beacons would be nice too. That's a Federal model 11, with optional chromed siren speaker in the center. I'd use the rounded speaker (like the speaker on the Adam-12 car) instead of the flat wide style in the Jo-Han kit. Since electronic sirens were just becoming popular, it would still need an old mechanical siren for under the hood as another option. To round it out, about six flashers of different sizes, 2 small, 2 medium, 2 larger, all single faced. These could be used for rear deck flashers, front grille flashers, optional light bar flashers, etc. Now the most important necessity for all of these lights: MOLD ALL OF THEM IN CLEAR PLASTIC. Not red, not blue, not a mix... CLEAR. This allows the builder to tint them accordingly to the agency that's being represented. The push bar would be a preformed pre-painted metal assembly, to keep it in scale and robust Agency decals: I'm sure licensing and permissions are in order here. But it shouldn't be too bad, considering Hawk/Lindberg is issuing about 6 different state agencies in their reissue of the 1996 Crown Victoria. A CHP version is a must, this would negate the need for roof lights, too, as they ran most of these with no roof lights and dual spotlights, the driver's side being red. The CHP would also have two flashers, one red and one amber, on the back package shelf, both on the left side, facing rear. However, the 1969 Polaras were used all over the country, and offering different versions or including different agencies in the one kit (like the Jo-Han Plymouth) would be great, one thing will be certain the deacsl will be done by Cartograph of Italy. About the tooling now, when planned and designed right, it canbe used for a plethora of C-body MoPar kits, from 1969 up to '77 as the chassis were virtually unchanged except for the yearly addition of annual emissions upgrades (or downgrades, if you will). Therefore the tooling lay-out isn't one big chunk of steel with removable inserts but a cluster of several and smaller tools A-Parts, Floorboard and chassis with suspension, axles & wheels. B-Parts, Engine and accesoiries. C Parts, Interior and body add-ons. D-Plated parts. E-Clear parts. Tires Taking this route, along the way one or more smaller tools in combination with others can be used in further siblings like for instance a '74 Monaco, one of the stars in the classic movie "the bluesbrothers", and seen in many many cop shows seen on TV like CHiPs
  20. Pilot proposal '69 Dodge Polara police car 1) Select the type of customer you wish to reach: The enthusiast modeler, As with big rig builders, police car modelers are rarely blessed with new subjects, and the few released were either simplified designs and retools or marketed towards youth, sometimes including questionable and costly extras. Only one kit sticks out and then it's an old tool whose current existential status is unknown, namely the old Jo-Han Plymouth Fury, which was on the market for decades. I firmly believe that police car modelers will lay the green on the counter for a detailed cruiser because they almost always had to rely on aftermarket companies to make a convincing model. 2) Choice of subject matter: The 1969 Dodge Polara is widely known as one of the all-time favorite cruisers amongst officers who were active during the 60s-70s. It is also listed as the fastest cruiser of the time, even surpassing the 94-96 Caprice LT1s. The 1969 Polara equipped with a 440 4bbl was officially clocked at 147mph in tests. It was basically a 4 door muscle car, which sat on top of the food chain eating GTOs, Chargers, Challengers, 'Cudas, Chevelles, Camaros and Mustangs for breakfast, lunch and dinner. Just the kit we need for keeping the tablecloths of America's contest tables free from tire burns! In fact, anyone who collects and/or builds muscle car kits must have at least one, just to keep his collection intact.
  21. 4) Packaging and support How do you want to present your product? The design of the box is the first thing the buyer sees, and may make or break a decision to purchase the kit. Packaging of contents, as well as the layout of the instruction sheet are also issues that may reinforce the buyers decision of having bought the kit. 5) Budget issues, after reviewing your proposal, it seems the kit you're proposing is slightly over budget. Luckily you're still in the design stage, so what aspect or parts of the kit do you alter, lose and why? It may seem like a cruel question, but it can help you focus on the essence of the proposal and get rid of the clutter which seemed like a great idea, finding out it only beefs up the price and could scare off some potential buyers. 6) Post a photo of the subject Post a photo either from your collection or taken from the web (when doing the latter, please credit the source). The 250 000 dollar / 250K question. Format created by: Luc Janssens, ©2001-2017
  22. Guidelines: 1) Select the type of customer you wish to reach. This will help you define the skill level, parts count, breakdown and price range. - Youth (and parents- grandparents who most likely will buy for little Johnny..) - Weekend (Novice) modeler - Enthusiast modeler 2) Choice of subject matter: You've selected your customer, now we need to find out what they want. - What's the current or expected long term automotive trend in the group you selected (Racing, Muscle, exotic, drag...)? - Which yesteryear's kits are (or were always) strong sellers and could benefit from a complete redo? (Amt vs Revell '64 Impala for example) - Are there still "missing links" in a successful series? (like 2nd gen GTO’s for example) - And last but not least do you think they're willing to pay extra copyright & trademark fees (not only from OEM but also from 3rd parties like tire, wheel and speed equipment companies, also racing sponsors, and media groups) because it can add up quickly when you go all the way. 3) Design of the kit & tool: Now that you have chosen the subject matter for the target group selected, one can start designing the kit. It must not only meet the skill level (easy, moderate, challenging) of the target customer, helping (not fighting) him or her to create something they can be proud of. It also sets the price bracket in which you will have to operate deciding on parts count, the choice as to parts breakdown depends not only on the skill level but the subject matter too. Here are two examples: - Skill level: molded-in headlamps are out of place in a kit marketed towards enthusiasts - Subject matter: Engines is very important in a drag racing car, but not in a Van where dress-up features are more desired. To tackle this, it's best to talk with fellow modelers (on or off Tom's board), go through your stack of kits or display case(s) lined with built models and write down what features you liked or disliked when assembling them. If you have any, take a look at your (old) promos and die-casts too, because they were/are designed for easy and fast assembly by non-modelers on a production line. I took the liberty of writing down some key elements which (for me at least) define the characteristics of an excellent kit, no matter what skill level: - Ease of build, no matter how many parts. - Parts break-down not only chosen in function of molding restrictions and possible future siblings, but also to avoid possible sink mark areas and optical distortions (on clear parts), the degree of detail you wish to incorporate, helping the painting process (like the separate grille inserts of the Amt (ex-MPC) '74 Roadrunner/GTX) or the mating of various subassemblies and also by trying to make the assembly dummy proof, by carefully (again to avoid ghost sink marks) chosen (perimeter) ridges, holes and pins. - Crispness of the molded parts, so clean-up is minimal and applying finishing materials like BMF becomes child's play. - Sprue attachments, designed not to damage the appearance of the parts when cut off the tree. This is especially important for plated parts. - Ejection pins, is it possible to position them on hidden surfaces, or on the sprues, maybe by beefing up the affected part(s) sprue attachment(s). - Parting lines, be creative and don't let them run too close to areas where they can affect the overall presence of the model, like too close to molded-in scripts, or try to hide by using the shape of the piece to its advantage, especially when dealing with plated parts. Keep in mind that outright criticism of an existing kits flaws or shortcomings may not be appreciated by its manufacturer when reading your proposal. So try to use constructive criticism. Likewise, pointing out strong points of a model's design or engineering aspects may facilitate the acceptance of your proposal. For us, this may be just a hobby, but for many it is a business and a way to make a living.
  23. For those not on Facebook, this is what it's all about Thanks! So the bank agreed to loan you $250,000 to spend on an all new 1/25 Car tool. If the investment is paid back in the agreed time, let's say 3 years, an extra $500,000 is coming your way for further releases. If you fail, say goodbye to the extra $500 000, and say hello to your new best friend, the repo man! (Insert crazy laugh here) If you accept the challenge, then read the introduction, guidelines and pilot project below, and you will be all set. Introduction: What is the $250,000 or 250K question and where does this number come from? The 250K question is a one of kind survey, which, with the help of friends, yours truly fired up in 2001. Its purpose is to find out what you, the automotive modeler would do, when given a budget to create an all new model kit and make a profit from that venture. The number was taken from a statement made by a former ERTL president in the late 90’s as to how much it costs to tool up an all-new car model kit. The number went South shortly after product development went East, joining the already relocated production facilities, but word on the street is, that it's on the rise again, and almost on par with North American counterparts. After a 15 year absence I felt that the time was ripe to start it up again, but not as a contest on one forum, but on Facebook, where like’s will show how much the projects are supported by the automotive model kit builders community. Now this little essay is more than listing dozens upon dozens of possible new subjects, but don't let this scare you a way, because this is so much more rewarding, and lets the manufacturers and distributors who often lurk these pages see in a positive way, what you the modelers want and how. So hop on board and create your 250K proposal. To help you on your way I created some guidelines and with the help of Tom Sheehy even wrote a pilot entry, so I’m very certain that when you're finished reading all this, the ink will steadily flow out of your pen or drive you spouse nuts when you're constantly hammering the keyboard of your home computer, tapping the keys of your tablet or mobile whatever....
  24. Bill....I'd like to see the positive sida about FB, there's a lot of knowledge over there, if you look past the political bickering and the fake news. My glass is half full, do hope yours is too
×
×
  • Create New...