MikeMc

I'm just lovin this whole hot rod!!I'm doing up the sedan version and wanted the frame on the ground...so a big Z took care of it. I love your pics on the rear end and how you increased the width....Now block and fill that top!!

So they are not as thick as the detailer??

Keep it coming Chris....looking great!!

rear vinyl.......real

Repeat until firm!!!!!

Way to go Randy!!! Good lookin stang!!

Perfect hot rod.!!!....and Walt if it cranks but doesn't fire, check that coil wire!!!

Pay attention please.... You need a photobucket or fokti account to post here....but not in the gallery. If you upload from the bucket not your computer and use the IMG line it is easy. So stop biting look up Clays post that will tell you the whole shebang!!! I looked at your albums large images...someone who uses fokti will tell you about the IMG line....I use the bucket not fokti!!

Hehehehehehehehehehehehehehe

heres a 66 with a boss instead of the SOHC

Sure thing Jon......This is MAD Chris Also stocks em SMBC Kris is also making the HEI types and Magnetos (Don't tell them I sent you It will cost more )

I will spend the $5.00 for one of Kris Morgans Masterpieces........ I have drilled, used tubing, detailmaster kit, sprues.........always back to MAD

R & M for unwired MAD for wired ones Both are top shelf!!!

after shaving emblems etc.paint a thin coat of liquid cement over it, let dry do 1 more time. Now a thin coat of filler or thick primer over it , let dry and then block it out...no ghosting!!

John a picture will help us...small chips can be filled with glazing putty..larger ones will need styrene scraps. I would not try the acetone melting you may make a bigger oops!!

You and me George!!!!! that Harry....he's good!!!!

Why do you want to plow snow???

Great job....Donns system will work you have to do it all!!

gotta agree with ZoomZoom f8 sucks...gimme f64!!!

Use a K&S spring style tube bender .if you want to freeze water in the tubing then bend to your perfect angle...warm up and polish!!

Jus saw this, Jay, yeah, I'll PM ya on how I did it. It wasnt hard atall really. Just a razor saw some straight pins an a pin drill. Oh yeah an some VERY sparingly use of the ol Superglue! An yeah,Bill, I HAVE been known ta build a model or two! But is it finished yet????I wamma see it!!!

Ahhh transmotion(need your name) you are asking a lot of needed questions and all good ones. Rather than bore you with my writing skills you should scroll down to Tips ,tricks and ideas you can search here or just scroll down and you will find a wealth of ways to do your painting. We all have a slightly different way of shooting paint...most work well, so you need to find a style that you will be comfortable with...then practice, practice, practice!!!! good luck!

Was that built by Binford Tools????

I love it!!! But Jason sign up your dad and let him show those goodies.......Really....he can play with us too

The EASIEST way is to not clean them at all. If you turn the can upside down and spray out you do not need to clean them at all!! Oh thats what the directions said...........