MikeMc

TOP SHELF DENNIS!!!!!!!!!! Wonderful...keep it coming!!

Send Bill a PM or EMail......He will answer any questions for you!

It is listed as convection...looks like a good buy! Burnt Metal.............

Thank YOU for the great build!!!

Ran into a minor problem.....I cannot get any naughahide as they are federally protected now Came up with some old skins I found out back...........And Jairus never gave any colors on this kit........

Hey Brian.....follow Brians advice......if you load pictures as attachments you will have this issue.....get a photobucket.....its free and worth it!

Either will work......The goal is 105 degrees F If it has a fan it has to be temp adjustable. If it is convection a dimmer switch wired in will allow you to dial the correct temp in. The fan types do not work well with the dimmer setup as the fan now runs slower.....The key is to adj the temp between 100 and 110 F

Bill G....Mr "O" did an article last year on hinges and jambs.....I will dig it out!

Fan or convection??

Rob, the green pad is rough...you need the real fine steel wool "000"?? LIGHTLY scuff it. Keep it coming!!

Great reason to use Testors Diamond Dust as a base.......lets see it Tim!!

Heh Rob.....I think you've done very good with Virgils salt tech...I think the avacado is the perfect color for this era. IMHO..try a little misting of an acrylic rust way reduced..so you hit the whole car and then a light rub with steel wool and I think it would explode! and look at his tissue paper tut HERE...I think the seats and headliner might work for this one...

Unique as always Mr Most!!!

I heard that from Jairus and I could not get a pen that was the correct diameter vs window size so a length of tubing from the scrap box.

That is gonna be sweet when finished!! Stance is just right!!!!

The BOMB is doing well , thank you.....there is a link in this post or look on the workbench!

The headliner article is over the top...worth the wait

Where is Nick with a commercial when you need him............. YO DUKEFAN69!!!! OH Well!!!

Lookin great Tom!!!! And you don't need no stinkin spare.....

1 coat grey primer, 2 coats TS6 Kit chrome, decals, lenses, 4 brush coats of future....it IS the kit!!!!

Thanks Jim....The paint does "glow"...Thats Tangelo Pearl from HOK..Has a soft yellow glow in the lights.....Check my photobucket for the 69 Camaro !! When I shot the 3 coats of color and clear that makes that pop just a bit more...I cannot wait to polish this one out!!!

Lotsa work getting done...thought I should update this. The color has been on and curing for a bit now. Hit it with 3 coats of Tangelo mixed into 75% SG100 intercoat clear...this gives the pearl more depth. Then it was on to the clear 6 coats of clear and now its baking at 105 for 4 hours. So got the interior started with some TS6 and will get texture, gloss and some upholstery soon.Here is a picture of the dash...was perfect till I moved the lens when I was futuring it .....(don't tell )

Even though its (ugh!) Red it is well done!!!!......no mail slot in the rear!!! Its just me ...can't stand red anymore

To start out get the "odds and ends" assortments....all sorts of goodies, get the round one also!! I also recomend Tenax cement..... http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXF884&P=ML http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXF734&P=ML

Between You and Dave It looks 100% now....and with the small pieces I think you'll have all angles covered!!