-
Posts
3,436 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Everything posted by bobss396
-
1958 Ford promo or kit?
bobss396 replied to fordf-100's topic in Model Building Questions and Answers
My bad, is there an address for AMT on them? I have seen some promos with something other but Troy Michigan on them. -
And I thought I had a bad case of OCD... I am a pure amateur next to some of you guys. But it is a great reference without a doubt.
-
Nice build! I had always wondered why a relatively obscure driver like Pond was chosen for this kit. Drivers like Donnie Allison or Benny Parsons would have been my choices over Pond.
-
Another great kit that has held up over the decades. Back on the 1st issue, it was revolutionary with steerable wheels and a tail gate that worked. I have built a few over the years and it was always a nice build at the end. Lots of foil on yours... whew... looks mint.
-
1958 Ford promo or kit?
bobss396 replied to fordf-100's topic in Model Building Questions and Answers
It may be an SMP kit, precursor to the AMT line. I know of a club member that scored a pair of them recently. I'll have to ask him later in the month. I see them on eBay once in a while. Modelhaus used to be the only source for lights and chrome for those. -
It is a good tip, I use plastic knives too. I used to root around for scrap pieces, etc. Spoons are dirt cheap and you can use them to eat ice cream after...
-
I was shooting AMT paints around 1968 or so... I still have some models from back then. Like the south end of a northbound alligator... bad... There is one modeler in the club, quite opinionated on paint work, spouts a lot of rhetoric I have heard before and his paint work is... not acceptable to me. He gets unintended effects I have never seen before. I keep it simple, almost all rattle cans unless I'm, shooting nail polish. I would crank the pressure down to about 15-ish. Hand speed with that stuff is crucial. It has to look WET when it goes on. With anything I paint, I walk the ragged edge of a sag or run rather than something grainy that I'll have to sand the BLAH_BLAH_BLAH_BLAH out of. I believed what I used to read on old forums... "mist" coats... right... that ship has long since sailed. You'll get it, just keep plugging away.
-
I know a few "good" modelers that would call that a great paint job...
-
I have this habit of sitting too far from the table. I like to sit back and sand parts so the mat keeps cleaner. Sooo... how many times do you find yourself dropping parts on the floor? For me, too many times a day. The area is carpeted and I keep a flash light close by. About once a week I get down and look for supplies I have dropped, then I vacuum up the dust and anything else.
-
How Stable Is The Plastic Used In 3D Printing?
bobss396 replied to oldcarfan's topic in Model Building Questions and Answers
Most of my wire wrap stock is around .016-.018". I find it to be just right for me. I drill distributor holes to .020-.022" and the plug holes in the heads to around .026" since they get paint build up. Or I have to chase them after paint. Lately I have been drilling them even bigger, so I can slip the plug boot wires into the heads, gives the wires more support. -
I wound up in a heated email battle with the Model King over this very kit. He even sent me a 2nd kit that was as bad as the first, I still have them un-built. I will be taking them to an upcoming show where I will be a vendor.
-
Too bad that Donnie's career was cut way short. Both brothers were amazing racers. The fact that they raced all year around even back in Florida made them great. The story of the '64 Chevelle is a good one. Bobby petitioned NASCAR to allow him to use a HM front stub and it was denied. He wound up drawing one out of the shop concrete floor and made his own. https://www.chevyhardcore.com/features/bobby-allison-racing/
-
What kit is that? I really need to get out more...
-
I avoid using enamel paints like the plague. I believe my last was some NASCAR spray cans that worked well enough. On softer paints, I'll start with a #3200 grit. I use only spray cans, too lazy and a lack of a dedicated model painting area. In the past 15 or so years I have used almost exclusively Tamiya TS sprays, Duplicolor, Mopar (eBay), the old Black Gold products.
-
1965 Oldsmobile 442(from an AMT '64 Olds 442) - FINISHED
bobss396 replied to crowe-t's topic in WIP: Model Cars
Wow, skill level 745... lots of work went into this one. -
I paint outside too. Even in winter, dash out, paint and dash back in. The only paints I have a blush issue is with Duplicolor spray cans. As a kid, I used a big cardboard box that sat with one side cut out, on top of the washing machine. I may have to do that come real cold weather. My main concern then would be the dryer lint.
-
These old kits are a pile of work for sure. Few other than us appreciate the HOURS that go into making a single piece look right.
-
I had given some thought to getting a dedicated model building shed. Even an 8' x 8' would do it. Run a few electric lines from my pool outlets and I would be in business.
-
How Stable Is The Plastic Used In 3D Printing?
bobss396 replied to oldcarfan's topic in Model Building Questions and Answers
We did a lot of 3D printing at work. At first, mainly prototype parts before we had them machined up. Fits and tolerances were excellent. We later graduated to making assembly tooling as well, we found the parts we could use as-is with no further machining. Threaded holes, we bonded in threaded inserts. Some of the inserts like Dodge Serts we pressed in. I buy a lot of 3D parts. My main gripe is that distributor holes and also those in master cylinders are often too small for even a .016" wire. I use a lot of braided lines that measure .020", good luck opening those holes even by .002-.004". In thin sections, the material is quite brittle. It would be easy enough to design-in a larger hole for easier assembly and establish a glue-line. This shows that many parts makers are not the actual consumers. -
How was the glass fit? I got one kit, looked at it and put it back in the box. I would have had to re-make the rear window opening from scratch, I don't recall how bad the windshield fit was. I built one as a kid, also the gasser style.
-
I had met Bobby at a DIRT modified race at Flemington NJ in 1983, he signed a bumper sticker for me, I should still have it. His car was a Miller beer replica of his WC cars. I met Davey when I was running at Islip in 1984, I got to talk with him a bit. Too tragic that he is no longer with us.
-
I knew a few guys in my club some years back, they swore by Plastic Wood. I thought it was too coarse to use. Does it sand out smoothly? I'm using Bondo or 3M spot putty, less is more of this product. How much does the PW shrink?
-
Johan ‘70 Cadillac ElDorado pro touring (low and aggressive)
bobss396 replied to Steve H's topic in WIP: Model Cars
I just read the whole thread. Nice choice on the chassis, I would never thought of using a WC chassis under a non stock car build. Making it up as you go along, that is the fun part.- 220 replies
-
- johan
- pro touring
-
(and 1 more)
Tagged with:
-
I had to stop yesterday, my table was out of hand in a big way. I have 5 projects going at once... My main area is about 3 foot by 18", behind that I have supplies, projects boxed up. I cleaned everything off and went out to buy a bigger mat, 11" x 17" at Hobby Lobby. I have a smaller one I keep files and sanding sticks on. BUT... it is a vast improvement for me. I tend to build in total chaos. Just like my 2.5 car garage crammed with cars, parts, tools and machine shop equipment. I'm going to get a better (non leaking...) shed so I can move some stuff out to it. At work, my office was known for being a disaster zone. I always had a lot going on.
-
Source for 1:24 or 1:25 tow hooks?
bobss396 replied to PHPaul's topic in Model Building Questions and Answers
I will report back when they arrive. The 3D ones were too much like work to get them to be acceptable to me.