MarkJ

Excellent job , Hondo. So glad that Stoney is making decals for these kits.

Thanks guys. I guess I will be doing a Ford next year. Rusty went from a Ford Blue Deuce to a Dodge and now Brad will be going back to a Ford. Just to think Brad will be in the same camp with Edwards irks me. I bet Brad's not to happy with the move since his dad always drove Dodges during his ARCA career.

Niko, that must have been two winters ago because thats when Kurt was driving the blue deuce and it still had the ugly braces on the front splitter.

I totally agree with you Dave. Since these amt cars are the most accurate modern cars available.

Finally finished. Pictures are in the Nascar section of the forum.

Finally got this one done. The decals took longer to make than the model did. 2010 AMT Earnhardt Jr. 1/25 scale snapkit. Tamiya ts-50 paint. Evergreen styrene strips, rods, and sheets to make the front splitter, rear spoiler and shark fins. Squadron white putty to fill in the gaps. All decals created by me except for the Sunoco, Goodyear, Nascar race car decal on the a-pillar, and the aero decals on the wheels. These came with the kit. I also had to modify the quarter glasses to look like Dodge quarter glasses. I wanted this model to resemble the Pocono car because that's where Brad beat Kyle Busch to the finish line.

I definitely will be watching this one. I owned a 76 Laguna s-3 that I ordered from the factory but i ordered it with the 350 2bbl instead of the 400 4 bbl. It was a dog needless to say. I ordered it without the stripes because the ones that came in with the stripes never looked right. I have a model of the 75 malibu that i need to do. The one that needs the fender openings made smaller. I think it is also a model king kit.

The decals turned out pretty good but the bleed through is pretty bad even though they are white sheet decals. I have decided to print three more sheets and do another layer to improve on the bleed through problem.

Finished decaling today. All I lack is installing the roof antenas and sealing the decals with future this Thursday. After that I will take the final pictures and call this one done.

Just to show the difference between a 1:24 scale decal and a 1:25 I found an old goodyear decal from a 1:24 scale sheet and put it above the goodyear decal that I will use that came in the amt snap kit I am using to build this model. Pretty big difference. An enterprising decal maker that does 1:24 scale decals could reduce his sheets and print them as 1:25 scale. He could offer both sizes to his customers.

Thanks ,Randy. I really appreciate the compliment.

The only reason I use the Testors sheets is because they are readily available at Hobby Lobby and with a 40% off coupon they are not to expensive.They are however pretty hard to work with . That is why i put multiple images on the sheets. If I mess up I don't have to print a whole new sheet. If you build a white car you can use clear sheets and you don't have to cut the image out exactly on its edge.

Matt, I created them with an Adobe Photodeluxe 2.0 program and printed them out on an HP 4500 Office jet printer.I got the images from pictures from the internet. I used Testors white decal sheets and will cut out the images as close to the edge as possible. I will touch them up with some decanted paint, as necessary, and then seal them with future.

Finally got the three decal sheets done. Hopefully I can get them on next weekend.

I'm about half way through creating the decals for the model. I started at the nose and am slowly working my way back. There are so many decals on the modern cars. I did come up with a faster way of sizing the decals so that shoud help.

Excellent job.

I realized that the yellow rockers ,front spoiler and lower rear bumper were not a solid color yellow so I will have to make a decal for them so I needed a white base for the decals. I also touched up some other items.

Awesome job bringing it back to life. Excellent work.

I heard it was Almendinger. Hopefully he will be a better team mate then Kurt was.

Got the model done except for the antennas on the roof, the fuel filler and some detail painting. Only big thing left is finishing the decal sheets.

Amt chose to put black lines thru the Goodyear lettering which the real cars don't have. I took a sharpened tooth pick and touched up the letters. I will seal the tires later with some clear dull coat lacquer.

If you haven't built one of these kits yet this is what the finished interior/chassis looks like. With a little bit of paint you can make it look a lot better when the body is installed over it. To get the 1/4 glasses to fit, first you put some masking tape behind the window opening. Then cut it out with a #11 xacto blade. Then you stick the tape to the back of the 1/4 glass and cut the excess plastic off making it a little larger than the opening. You then take sanding sticks and slowly remove material till the glass fits in the opening. All thats left is putting a new border around the glass.

Got it painted. Looks darker in real life.

As I post this I had just finished shooting the blue and it turned out ok. These are the ready for paint pics. Hopefully I can get the painted pictures posted tommorow.

Yes, i found many photos at Brad's website but the one at Carlisle was huge and big pictures dont pixalate as badly when you reduce them to fit the model. they have more pixels per inch to start with.