Edsel-Dan

Hi all, I have a New Favorite Music Group, but they are From Hilversum/Amsterdam area of Nederland/Netherlands/Holland. I would love to understand what they are singing, but do not read/write/speak Dutch yet. Any help would be greatly appreciated. They are a Childrens Group, Kinderen Voor Kinderen, if that matters. There are a few others from there I like too. Many Thanks,

I took lessons YEARS ago. Lost all that when my brother took all the guitars! I would like to learn to play one or 2 songs though. Mostly "Smoorverliefd"

First thing I do is ask the seller if they take US Postal Money Order as I do not have pay-the-bay. If they say No, I do not watch that item, or any of their others ever again. If they say yes, I will bid. I ususally put the max I can afford then. But if I am first bid, I may put a low bid in. I may later go and increase my bid if I really want it. I have 3 Aurora ALF kits I got for under $40.oo shipped.

I like that one. If Juha Airio mastered it, I would Not expect some one to call it only passable like most of their other castings But, I have no idea what they may have done to the master before casting

Bobby Allison drove Bud Moore's 77 T-Bird, Not Torino!! the other mag showed one of the Lindberg 1/32 scale built as the Nascar!!

I would love to see the 71 Satellite & 73 Matador in 4dr sedan!! I want that 68 Belvedere. 67, & 69's too!! I might try to graft the roof from a Jo-Han 68 Fury onto the Mono/Rev 67 GTX. The design was very similar. I measured a 67 Coronet a few years ago. I would love to see more 4dr kits! Even Station Wagons!

MPC offered the 78 & 86 Vette Pace cars, AMT/MPC also had the Purple 98 & Radar Blue 95 in Snapfast & Promo I don't remember if they did the 95 or 98 as full kits. Cady offered the Viper decal sheet with both the 92 Roadster & 96 Coupe decals as one set. I don't recall ANY Viper kit had the Pace car decals!! AMT did put Official car decals in the Stealth that Was to be the 92 Pace car and gave us Both 92 Roadster & 96 Coupe PROMO's Only as pace cars I have a large collection to finish/build/restore I was hoping Galaxie would offer the Convertible body on their many years ago announced 41 Chevy series, but will have to accept a Coupe to chop open. 31 Jo-Han Cadillac Cabriolet/Roadster (Convert to V12) cady decals 33 Chrysler AMT/MPC 32 Imperial Roadster cady decals Testor's/Italeri Grill spoke wheels 46 Lincoln Lindberg issue with Cady decals, 53 Ford Lindberg Pace car kit 55 Bel Air convert, Monogram kit 59 Buick AMT Invicta coupe chopped/Monogram 59 Impala windshield frame, Cady decals (Looking at replacing interior too) 60 Olds 98 Miller Memorabilia resin/Bondo casting Cady decals, Mono 59 Impala chassis/windshield frame 61 T-Bird, was going to modify Modern AMT 62 into 612, but now have ORIGINAL 61 Convert 2 cady decals 62 Studebaker Lark Daytona Jo-Han Snap kit Cady decals 64 Monogram kit & cady decals 66 Comet Promo hardtop. will replace with convert as soon as I can 67 Camaro AMT 68 with MPC/AMT 69 Windshield frame Cady Decals 69 MPC kit fram set, Revell kit 70 Jo-Han 442 Coupe Revell 72 body Cady decals 71 AMT 70 Challenger, cady decals, need 71 grill/bumpers/interior 72 Rev 72 Cutlass H/O kit cady & kit decals 73 Jo-Han Eldorado cady decals 74 Jo-Han Cutlass snap kit coupe Cady Decals 78 MPC Vette, built, Monogram kit(2) 79 MPC Mustang built cady decals 81 Monogram HighPerfomance GNX Cady decals 82 MPC Camaro built 84 Monogram Mustang Cobra kit 85 Monogram Camaro kit, AMT Promo 86 MPC Vette kit 92 AMT Viper Promo 95 Monogram Vette kit (3-1 Complete) 98 Monogram Vette kit I have some pics in my photobucket.

I too agree, You are doing great in your English. I too can understand your worry. I am trying to learn Dutch, but only have a bunch of Songs to use!

I started this one back when AMT re-issued it. Need to dig it out again. I do like that clean Stock Classic!!

I try, but Very little Luck in my area. in 15-20 years of trying, I have found less than 10 models. Bigfoot 1 was first find. unbuilt, only $1.50 sealed inside too!! Glue Bomb 77 & 79 Trans Am's about $1.oo for the 2. My last find, late April a 68/9 GTO for only $5.oo Sealed I have a friend who goes to Many more every week and has found a little. First was an Original Monogram 1/32 Mack CF Pumper. Last week no kit, but an NWSL "Chopper", Toll rack, Paint Shaker, 1/35 scale ruler, etc

I use to be able to get an occassional MCM in th e'Hobby Stop" in Seaford, Del. but didn't see them or the Other one the last time I was able to got there. I have a B&N 32 miles north of me ans 15 miles closer than the Hobby Stop. I will start going there to look for the mag!! Why doesn't the publisher collect unsold issues to sell in the back issue order form??

The Ohio State Trooper Original issue of Lindberg's 97 CV Did call it a Snap. "Super Snap Ultra" to be exact. I have 4 of them in boxes, and a built one for resto/parts. Biggest item on the recent issues I don't like, The holes for the MX lightbar do not match the Original Vision/Vector V lightbar pin location. The MX lightbar is not as good in my opinion as the Vision/Vector/V in the Ohio kit. I have the Alabama, Illinois, CHP, versions, but my Generic decided to climb under my foot and went "Crunch"

So far, I have only received one purchased kit only wrapped in paper over the kit box. A Heller/Lee copy of Imex/Arii's 58 Cadillac convertible. I got lucky in the box was not crushed, or mutilated in any way. I too save all receiving boxes. Plus, I watch the Recycle bins here in town. When I see good boxes, I take them. Due to the quantity of kits I have, I re-enforce the kit box itself with corrugated cardboard inside, bag loose parts, agid surround with bubble wrap/Foam sheet. layer peanuts or foam sheet/bubble-wrap. Be advised though, The Post Office may accept paper as packing, but UPS will VOID insurrance if paper is the packing. I asked once in a UPS shipper's office.

Not in 81 they weren't using Torinos. The 81 T-Bird IS a Nascar kit Only. Otaki/Arii still occasionally offers the 72+ 'Bird kit. But as a Japanese market only kit, it is rather expensive here.

The Polar Lights kit is a separate tooling than the Aoshima/AMT kits. I have one of the P-L kits. It has metal axles and a Chrome plated body. Aoshima has re-issued the series at least once. there are as many as 4 kits. Original movie with the Folding wheels & Mr Fusion as well as the lightning rod. Second movie with Wide Whites, and Third movie with Rail wheels I have recently seen smaller 1/43 scale kits showing up from them too. Wish AMT would contract to offer this one again.

I like this one too! i have one of those 1/32-1/48 scale Decotora Van kits. I am looking at what I need to do to build it Stock. I think all those parts are in there, just not called out in the instructions.

I have an unbuilt in the MPC 74 issue 72 Longbox Stepside kit If anyone is interested in casting it. The bike in the Bigfoot-1 is more of a Minibike, not a Dirt bike. I have one. It's the same as in the 6-wheel Ford Econoline van kit.

I want one of these. Is this done in Single section sides, top, bottom like the Old AMT 40 ft box van?? I have an Italeri Box van & a Heller Canvas top trailer, and both are Split section, 2 pieces for each side, top & bottom plates. Not easy to hide those seams!!

here they are: http://jleslie48.com...port/index.html http://jleslie48.com...rane/index.html http://jleslie48.com...dels_other.html Another Cab, and accessories, not to mention some other interesting models. These Semi's are FREE!!!! That Crane is Filly Functional with Careful building!!

Since mo0st resin manufacturers suggest you soak the parts in Wesley's Bleeche White Tire cleaner, that is what I have used for stripping paint from resin.

I have one myself. Bought new back when. Don't like the way Rev did the Jetstream/Jetstrobe lightbar. The seam would have been better through the center of the top & bottom making a front/back like the chrome reflector/flasher center parts I would like to do both versions I know of. The kit supplied Jetstream & one with a "Vision/Vector" Flying V lightbar. I have seen pic's of both. Does this car still run?? or exist?

Shawn, Should we give these guys the link to Chriess' Paper semi trucks???

Hi all. Is there a reason why I now get an error when I try to go from a Subject area to "Model Cars" in the Forum?? This is what I get; Sorry, we couldn't find that! [#103139] You do not have permission to view this forum. Need Help? Our help documentation Contact the community administrator I can still navigate by going out to the front page 'Model Cars Magazine Forum' then to the subject I want, but can not get to the 'Model Cars' section directly I do not get this error in any other sections, Help, Trucks. Just in Cars. I did not know what to do, or if anyone else was having this trouble.

I would try the same type paint you use on tire sidewalls. Acrylic there is/was a paint formulated for Flexible parts of Model Railroading but am not sure if it is still made. Was it from Badger?? I want to say it was called Flex-color or Flex-coat??

I thought they were going to do the Coupe & Convertible bodies with 40/41 style front clips giving us the option to combine all 4 kits to build all body styles for all years. That was the report back when the 2 48's were first announced.