TarheelRick Posted July 20, 2017 Share Posted July 20, 2017 Jaw-dropping beautiful build of a really obscure piece of equipment. I think these are the official vehicle of North Carolina - almost everywhere you go there is one rumbling along some paving project. Quote Link to comment Share on other sites More sharing options...
Dave Van Posted July 20, 2017 Share Posted July 20, 2017 WOW.....this is the kind of project I love!!! I missed the early work....now gone photo wise......but will watch now. I have always had a road roller project in the back of my mind......a little earlier vintage. GREAT WORK! Quote Link to comment Share on other sites More sharing options...
redneckrigger Posted July 20, 2017 Author Share Posted July 20, 2017 WOW.....this is the kind of project I love!!! I missed the early work....now gone photo wise......but will watch now. I have always had a road roller project in the back of my mind......a little earlier vintage. GREAT WORK! Thanks to all for the great words! Thanks also to Photobucket for dropping a nuclear bomb on forums and sites world wide! But live and learn! Will try to keep this project going! Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted July 22, 2017 Share Posted July 22, 2017 Excellent work Quote Link to comment Share on other sites More sharing options...
redneckrigger Posted July 24, 2017 Author Share Posted July 24, 2017 (edited) Rainy day at the work bench...... wired the engine, made the access doors with the ventilation screens and the gear cover door, installed the steering cylinder which works, made the water tank, made the transmission and right angle drive box, made the nameplate for both ends, installed the foot openings to climb aboard, installed the front top skin, and only glued my fingers together twice! Now it's starting to look like something. Still have tons of details to do as well as the operators platform but it's getting there! Edited July 25, 2017 by redneckrigger Quote Link to comment Share on other sites More sharing options...
Dave Van Posted July 24, 2017 Share Posted July 24, 2017 VERY COOL!! Quote Link to comment Share on other sites More sharing options...
Foxer Posted July 25, 2017 Share Posted July 25, 2017 That soaking rain yesterday looks to have been worth it, thou it didn't spark me.That lettering looks good ... what a job cutting that out! You were cranking ... all looking great and that steering knocks me out! Quote Link to comment Share on other sites More sharing options...
redneckrigger Posted July 25, 2017 Author Share Posted July 25, 2017 That soaking rain yesterday looks to have been worth it, thou it didn't spark me.That lettering looks good ... what a job cutting that out! You were cranking ... all looking great and that steering knocks me out! Thanks, Mike. The lettering is actually from a company called Kit Kraft. Here is the link: Don't remember seeing a brand name..........https://kitkraft.com/products/3-16-plastic-lettersThey are easy to use and come in several different sizes................perfect for the cast name plates these old machines commonly had.Actually, the steering was the easiest part of this whole build so far! Quote Link to comment Share on other sites More sharing options...
Tesla Posted July 25, 2017 Share Posted July 25, 2017 Awesome work Tom! Quote Link to comment Share on other sites More sharing options...
redneckrigger Posted August 9, 2017 Author Share Posted August 9, 2017 (edited) Just a bit more done.......all the sheet metal, operators platform, external control levers and pedals, all internal hydraulic hoses and control rods and brake, clutch and shifting linkages, engine installed, seat, and a few other engine control details. Still have fine details, hinges, grab handles, batteries, tow hooks, water system and about 25 punch list items to do before it's ready for paint. Aside from kit parts used for the seat, radiator, and the kit bashed 6 cylinder flat head engine, this is totally scratch built, a first for me. Closer every day! Edited August 9, 2017 by redneckrigger Quote Link to comment Share on other sites More sharing options...
TarheelRick Posted August 9, 2017 Share Posted August 9, 2017 Simply jaw-dropping amazing scratchbuilding. Are you sure you don't have a bunch of little scale welders, machinists, and metal workers running around your bench? Looking forward to updates. Quote Link to comment Share on other sites More sharing options...
Foxer Posted August 9, 2017 Share Posted August 9, 2017 It keeps looking better and better ... fantastic detailing!And, all here should know your gun shop won Best of the Berkshires, a vote by customers of everything in the county! Quote Link to comment Share on other sites More sharing options...
redneckrigger Posted August 9, 2017 Author Share Posted August 9, 2017 (edited) Simply jaw-dropping amazing scratchbuilding. Are you sure you don't have a bunch of little scale welders, machinists, and metal workers running around your bench? Looking forward to updates.I wish! It took me longer to figure out HOW & WHAT I was going to do than it took to do it. I gathered all sorts of pieces and parts, and sat and planned for days.........................and finally just said the heck with it and threw them all together. The hardest part is due to the way this thing is built, all of the detailing is being done through the actual access panels of the roller, and was not done before the sheet metal was put on, VERY difficult for someone whose thumbs don't work very well, but great therapy. Thanks for the good words! Now I just have to find a tiny little painter guy to crawl inside this thing to paint it!It keeps looking better and better ... fantastic detailing!And, all here should know your gun shop won Best of the Berkshires, a vote by customers of everything in the county!Thanks Mike! And thanks for the good words about our gun shop......it was a total surprise to us, but much appreciated. And totally owed to our fantastic customers and friends! Edited August 9, 2017 by redneckrigger Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted August 9, 2017 Share Posted August 9, 2017 Very impressive work!! There's been rumors about a giant laser that shrinks things down to scale. I think that you may have found one. Quote Link to comment Share on other sites More sharing options...
Modeltruckbuilder Posted August 9, 2017 Share Posted August 9, 2017 (edited) - Edited December 27, 2017 by Modeltruckbuilder Quote Link to comment Share on other sites More sharing options...
Chariots of Fire Posted August 9, 2017 Share Posted August 9, 2017 (edited) A little hint about painting the inside. It may be a pain with the engine in place but paint the inside with a brush using the same color as the outside. Then when you paint the outside if there is any overspray that gets inside you will never know the difference. Done that on a couple of pieces and you don't get all of that extra spray paint. Little places get paint that otherwise would not. (Just my two cents!) An example of what I mean. Interior of the rear pump compartment was brush painted. in the first photo. In the second photo is the finished paint job of the same area. Edited August 9, 2017 by Chariots of Fire Quote Link to comment Share on other sites More sharing options...
redneckrigger Posted August 10, 2017 Author Share Posted August 10, 2017 A little hint about painting the inside. It may be a pain with the engine in place but paint the inside with a brush using the same color as the outside. Then when you paint the outside if there is any overspray that gets inside you will never know the difference. Done that on a couple of pieces and you don't get all of that extra spray paint. Little places get paint that otherwise would not. (Just my two cents!) An example of what I mean. Interior of the rear pump compartment was brush painted. in the first photo. In the second photo is the finished paint job of the same area. I will certainly try that! Yeah, having the engine in place will be a pain, but it is also all painted the same color as the roller. But, I appreciate the advice...............never thought of that! Thank you sir! Quote Link to comment Share on other sites More sharing options...
DrKerry Posted August 11, 2017 Share Posted August 11, 2017 Coming along nicely!!!! Great scratch work on this!!!!!!!! Quote Link to comment Share on other sites More sharing options...
gatorincebu Posted August 17, 2017 Share Posted August 17, 2017 Tom, You certainly have been very busy. the roller is looking great . / Are you going too.................................................................? Be Well Gator Quote Link to comment Share on other sites More sharing options...
redneckrigger Posted August 17, 2017 Author Share Posted August 17, 2017 Got the fuel lines, exhaust and air intakes all done..............got the steering roll scraper and sprinkler pad all done, roller axle hubs, and a few other small items. Have been busy doing other "stuff" while weather is good. Will get some more pics up soon. Quote Link to comment Share on other sites More sharing options...
redneckrigger Posted August 18, 2017 Author Share Posted August 18, 2017 Steering roll scraper and sprinkler pad........ Quote Link to comment Share on other sites More sharing options...
mikemodeler Posted August 19, 2017 Share Posted August 19, 2017 Incredible details and scratch building skills to be envious of. This is one outstanding model and am anxious to see it done. Much to be proud of! Quote Link to comment Share on other sites More sharing options...
redneckrigger Posted August 23, 2017 Author Share Posted August 23, 2017 Got all of the hinges and final details in place and a coat of primer on it. Then I promptly broke the entire front drum pivot yoke off and had to do a major reconstruction. Oh well! Got the repairs done and final bodywork touch ups done and hit it with a coat of paint which I also screwed up, resulting in a swim in the purple pond. Just got done with a redo of the paint job, and it will suffice. As always we are our own worst critic, but it will pass the fifty foot test! Final assembly, decals and lettering, minor weathering, detail painting, and finishing up the lowboy and pony winch and MAYBE, just maybe, I'll be able to stick a fork in this one! Quote Link to comment Share on other sites More sharing options...
Dieselhead Posted August 23, 2017 Share Posted August 23, 2017 (edited) Paint looks fine to me! Rollers aren't the most attractive creatures anyway, so no sweat either way. Edited August 23, 2017 by Dieselhead Quote Link to comment Share on other sites More sharing options...
Modelbuilder Mark Posted August 23, 2017 Share Posted August 23, 2017 Getting cooler and cooler. Back in the 80s, a friend of my dad's had a roller in his body shop he was painting. That thing seemed so large sitting in it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.