The Creative Explorer Posted December 17, 2018 Share Posted December 17, 2018 The 356C Cabriolet came in today and got the box open. As assumed and predicted, it does share a lot with the 356B easy-click, a lot of shared parts, together with the easy-click system. But it is more detailled and has opening/hinged parts. I'll start soon with a syncro-build to see where the real differences/similarites are. Quote Link to comment Share on other sites More sharing options...
Matt Bacon Posted December 17, 2018 Share Posted December 17, 2018 Thanks for posting these, Erik... it makes me a tad annoyed at Revell... as far as I can see, including two (maybe 3) of the smallest supplementary sprues in the coupe would give you everything you need to build that kit full detail with everything opening as well... it's a real pity they didn't! Looking forward to the side by side build! best, M. Quote Link to comment Share on other sites More sharing options...
Bennyg Posted December 17, 2018 Share Posted December 17, 2018 3 hours ago, Matt Bacon said: Thanks for posting these, Erik... it makes me a tad annoyed at Revell... as far as I can see, including two (maybe 3) of the smallest supplementary sprues in the coupe would give you everything you need to build that kit full detail with everything opening as well... it's a real pity they didn't! Looking forward to the side by side build! best, M. Completely agree! Ben Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted December 18, 2018 Share Posted December 18, 2018 (edited) Aha. This one's a C while the snapper is a B, apparently. I see. At least they give you one naked wheel to pull a mold from. Doesn't look like there's much in the way of brake details (this car would have discs as opposed to the B's drums). Obviously it was tooled to a projected price, as the Tamiya FUJIMI 1/24 kits have far more detail and much higher parts count. The engine and gearbox are a little lame, especially for a large scale. Still, if the proportions and lines are right, it looks like it should build up into a beautiful model relatively easily, or provide a fine start for some scratch detailing to add all the greasy bits Tamiya thought were important. Now somebody really needs to tool a set of 1/16 911 Fuchs wheels, and a pair of downdraft Weber carbs...and a 4-cam engine. Edited December 19, 2018 by Ace-Garageguy Quote Link to comment Share on other sites More sharing options...
peteski Posted December 18, 2018 Share Posted December 18, 2018 Body molded in black? I wonder if they are trying to cater to the modelers who do not wish to paint their Porsche (or paint it black)? 3 hours ago, Ace-Garageguy said: Now somebody really needs to tool a set of 1/16 911 Fuchs wheels, and a pair of downdraft Weber carbs...and a 4-cam engine. Perfect task for 3D printing. Quote Link to comment Share on other sites More sharing options...
Bennyg Posted December 18, 2018 Share Posted December 18, 2018 2 hours ago, peteski said: Body molded in black? I wonder if they are trying to cater to the modelers who do not wish to paint their Porsche (or paint it black)? Perfect task for 3D printing. Sounds great! Ben Quote Link to comment Share on other sites More sharing options...
Matt Bacon Posted December 18, 2018 Share Posted December 18, 2018 Thinking about it, given the difficultly I had getting the interior into the coupe version and the significant flexing I had to do in the process, I'd be seriously worried about breaking the cabrio body shell, given that you have to remove the beams in the doors to get them to open and cut away that large "spider" of runner across the top... It seems that the sills below the door are all that there is until the interior and floor pan are in place... best, M, Quote Link to comment Share on other sites More sharing options...
The Creative Explorer Posted December 18, 2018 Author Share Posted December 18, 2018 12 hours ago, Ace-Garageguy said: Aha. This one's a C while the snapper is a B, apparently. I see. At least they give you one naked wheel to pull a mold from. Doesn't look like there's much in the way of brake details (this car would have discs as opposed to the B's drums). Obviously it was tooled to a projected price, as the Tamiya 1/24 kits have far more detail and much higher parts count. The engine and gearbox are a little lame, especially for a large scale. Still, if the proportions and lines are right, it looks like it should build up into a beautiful model relatively easily, or provide a fine start for some scratch detailing to add all the greasy bits Tamiya thought were important. Now somebody really needs to tool a set of 1/16 911 Fuchs wheels, and a pair of downdraft Weber carbs...and a 4-cam engine. Not sure if you read it in Matt's topic, but I am working on drawing the standard wheels in a multi-piece way, with seperate drums. Casting from the spare one in this kit is possible, but it is the best looking. I hope to get my resin printer in january and will be able to print them in resin, rather than I can now with filament. Where I love the Fuchs on a 911, I don't think they are a good match for a 356, it doesn't look right. But hey, that is my opinion haha. I have 2 weeks vacation starting next week, where I hope to get things started on the B and C next to each other. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted December 19, 2018 Share Posted December 19, 2018 (edited) 6 hours ago, The Creative Explorer said: Not sure if you read it in Matt's topic, but I am working on drawing the standard wheels in a multi-piece way, with seperate drums. Casting from the spare one in this kit is possible, but it is the best looking. I hope to get my resin printer in january and will be able to print them in resin, rather than I can now with filament... When you have those wheels and drums ready, you have an instant buyer if you want to do an extra set. The rare Rudge knockoffs would be great for these kits too. Frankly, as large scale as these are, and as popular as the 356 series is all over the world, I could see quite a little aftermarket industry sprouting up to make all manner of upgrades. Edited December 19, 2018 by Ace-Garageguy Quote Link to comment Share on other sites More sharing options...
MrObsessive Posted December 19, 2018 Share Posted December 19, 2018 9 hours ago, Matt Bacon said: Thinking about it, given the difficultly I had getting the interior into the coupe version and the significant flexing I had to do in the process, I'd be seriously worried about breaking the cabrio body shell, given that you have to remove the beams in the doors to get them to open and cut away that large "spider" of runner across the top... It seems that the sills below the door are all that there is until the interior and floor pan are in place... best, M, If I were building this, I'd practice getting the easiest way possible to get everything in after the interior is done. Nothing drives me crazier than to get things all built up and then go through tons of drama to get it all together. It's one of the reasons 99% of the time I save painting the body for last. Looking at where those support beams are located, perhaps it might be better to leave those in place after the body is painted and interior put in and then cut those off afterwards? You could always touch up those spots that were cut after the fact. Quote Link to comment Share on other sites More sharing options...
Richard Bartrop Posted December 19, 2018 Share Posted December 19, 2018 I see the hobby stores are selling lengths of carbon fibre. Maybe those would do the trick if you think you need reinforcement? Quote Link to comment Share on other sites More sharing options...
niteowl7710 Posted December 19, 2018 Share Posted December 19, 2018 On 12/18/2018 at 1:06 AM, Ace-Garageguy said: Aha. This one's a C while the snapper is a B, apparently. I see. At least they give you one naked wheel to pull a mold from. Doesn't look like there's much in the way of brake details (this car would have discs as opposed to the B's drums). Obviously it was tooled to a projected price, as the Tamiya 1/24 kits have far more detail and much higher parts count. The engine and gearbox are a little lame, especially for a large scale. Still, if the proportions and lines are right, it looks like it should build up into a beautiful model relatively easily, or provide a fine start for some scratch detailing to add all the greasy bits Tamiya thought were important. Now somebody really needs to tool a set of 1/16 911 Fuchs wheels, and a pair of downdraft Weber carbs...and a 4-cam engine. I'm going to presume you mean Fujimi, as in the Enthusiast Series, as Tamiya kits don't have 174 parts in 1/24 and they certainly didn't do any 356 Porsches. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted December 19, 2018 Share Posted December 19, 2018 9 minutes ago, niteowl7710 said: I'm going to presume you mean Fujimi, as in the Enthusiast Series... You are correct. Sloppy thinking and typing on my part. I have most of the Fujimi Porsche kits, and a simple walk to the shelf would have avoided that particular mistake. Quote Link to comment Share on other sites More sharing options...
The Creative Explorer Posted January 3, 2019 Author Share Posted January 3, 2019 On 19-12-2018 at 2:10 AM, Ace-Garageguy said: When you have those wheels and drums ready, you have an instant buyer if you want to do an extra set. The rare Rudge knockoffs would be great for these kits too. Frankly, as large scale as these are, and as popular as the 356 series is all over the world, I could see quite a little aftermarket industry sprouting up to make all manner of upgrades. Even though it is too late for my own 2 356's (or I might retrofit them later), since they are both finished, I started drawing the wheels anyway today. I am going for a 2-piece set-up, first the drum and then the wheel itself. Quote Link to comment Share on other sites More sharing options...
Bugatti Fan Posted June 3, 2022 Share Posted June 3, 2022 (edited) Could not open your picture(s) in your last post Erik. Can you do a straight attachment of your presumably jpeg files? Edited June 3, 2022 by Bugatti Fan Quote Link to comment Share on other sites More sharing options...
drodg Posted June 3, 2022 Share Posted June 3, 2022 I built the coupe a few years back. I actually clear coated it and didn't paint the body. I painted the engine and interior etc. It ended up being a great looking kit but it did have some issues like the interior tub fit and I think the windows were quite a bit of a headache too. Good luck with your build and I would really have liked to have a set of Rudge wheels back when I build mine. Quote Link to comment Share on other sites More sharing options...
The Creative Explorer Posted June 23, 2022 Author Share Posted June 23, 2022 On 6/3/2022 at 11:09 AM, Bugatti Fan said: Could not open your picture(s) in your last post Erik. Can you do a straight attachment of your presumably jpeg files? I think they were attached JPEG's, but unsure why they disappeared? It might have to do with the forum overhaul. Quote Link to comment Share on other sites More sharing options...
Bugatti Fan Posted June 24, 2022 Share Posted June 24, 2022 Thanks for your reply Erik. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.