CabDriver Posted March 9, 2020 Share Posted March 9, 2020 Really enjoying this build! The extra detail you’ve added really adds a lot! Quote Link to comment Share on other sites More sharing options...
Art Laski Posted March 10, 2020 Author Share Posted March 10, 2020 Thank you, Jim! The floor pan required a little planning and quite a few steps. First I had to paint it the color of the car, including the flo red on two little tabs that tuck into the nose in the red section. Then it had to be cleared. After clear, I shot the back half with Tamiys Semi Gloss out of the can. I just love that stuff. I prefer an airbrush, but the results with that color from the can are unbeatable. Then I masked off the exhaust outlets on the top and the bottom and shot them with Testors Metalizer, and a little weathering. I brush-painted the front half interior with Testors Acryl semi gloss. I laid down a Scale Motorsport Carbon Fiber decal on the back half on the top side (available at ScaleProShop.com )I used a second kit to make the patterns for the CF decal. The effect is subtle, but worth the effort. I'm always amazed how well these conform with some Microsol and heat. Then I cut out some Bare Metal Foil for the heat shielding. I tried some staining on the BMF and the exhaust pipes. It looks a little messy because I was trying different things with the airbrush, which I could get away with because very little of it is actually seen. Quote Link to comment Share on other sites More sharing options...
Art Laski Posted March 10, 2020 Author Share Posted March 10, 2020 Here are some shots as I continued with the assembly. Quote Link to comment Share on other sites More sharing options...
Art Laski Posted March 10, 2020 Author Share Posted March 10, 2020 After I got the body on, I added the heads and wired up the spark plugs. Quote Link to comment Share on other sites More sharing options...
Art Laski Posted March 10, 2020 Author Share Posted March 10, 2020 (edited) It wasn't documented earlier, but I cut off the plastic catch tank and replaced it with a piece I made out of aluminum and painted it with clear blue Alclad wich gave it a pretty nice anodized look. All for now... More pics soon! Edited March 11, 2020 by Art Laski Quote Link to comment Share on other sites More sharing options...
Metalmad Posted March 11, 2020 Share Posted March 11, 2020 Looking good Art .... your building skills are always above and beyond. Quote Link to comment Share on other sites More sharing options...
Art Laski Posted March 11, 2020 Author Share Posted March 11, 2020 Thanks, Seth! Good to hear from you. See you in May? Quote Link to comment Share on other sites More sharing options...
Metalmad Posted March 12, 2020 Share Posted March 12, 2020 Art..... Yes I will see you in May for sure. Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted March 12, 2020 Share Posted March 12, 2020 Wow!!...this just keeps looking BETTER!!!! Quote Link to comment Share on other sites More sharing options...
Art Laski Posted March 28, 2020 Author Share Posted March 28, 2020 Thanks for looking, guys. Looks like probably September before we get together for the So Cal Open, Seth... ☹️ So my posts now are finally caught up to where the build actually stands. Earlier this month I had a 20-hour build day (and night) before the Valley Con show in Pasadena so I could get this thing to a point where it could be entered. It was presentable, but not totally complete, so now I am fixing some of that late night sloppiness and adding details I didn't have time for, like the throttle cable. But what did get added before the show are the dump tank lines, the kill switch button, some fuel lines, brake lines, mirrors faces, and attachment of the wheels, wing, etc. Still have the side decals to add and re-attachment of the wheels to get them a little straighter. I had a big problem with all four wheels touching the ground before the show, but got that resolved (at 3:00 AM), but not all the wheels were quite as straight as I wanted them. Anyway, here's a few recent shots. Quote Link to comment Share on other sites More sharing options...
Danno Posted March 28, 2020 Share Posted March 28, 2020 Wow! Stunning build, Art! Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted March 28, 2020 Share Posted March 28, 2020 So much Awesome detail!!! Quote Link to comment Share on other sites More sharing options...
Art Laski Posted March 29, 2020 Author Share Posted March 29, 2020 On 3/27/2020 at 11:27 PM, Danno said: Wow! Stunning build, Art! Thanks, Danno! Quote Link to comment Share on other sites More sharing options...
Art Laski Posted March 29, 2020 Author Share Posted March 29, 2020 On 3/28/2020 at 5:07 AM, Dann Tier said: So much Awesome detail!!! Thanks for looking, Dann! I appreciate your comment. Quote Link to comment Share on other sites More sharing options...
Belugawrx Posted March 29, 2020 Share Posted March 29, 2020 Nice work on that Art . Carbon decals add so much very clean looking build Sir Cheers Quote Link to comment Share on other sites More sharing options...
Art Laski Posted April 2, 2020 Author Share Posted April 2, 2020 On 3/29/2020 at 4:03 PM, Belugawrx said: Nice work on that Art . Carbon decals add so much very clean looking build Sir Cheers Thanks, Bruce! Yes, the decals are really great. I always marvel every time I use them how well they lay down, when at first they seem like they are never going to fit into the contours. But a little micro sol and hair dryer and they just settle right down and look awesome. I have a good stock of them for sale at my store at scaleproshop.com also. Quote Link to comment Share on other sites More sharing options...
RiderZ Posted April 3, 2020 Share Posted April 3, 2020 Killer attention to detail. Nice build Quote Link to comment Share on other sites More sharing options...
John Teresi Posted April 6, 2020 Share Posted April 6, 2020 Hi Art......I haven't been on the Forum for awhile ......I am just about ready to get back to building in a few days......but,I just wanted to tell you how much I enjoyed looking at this build .....you have really shown some outstanding talent on this build......and I even saw it in person at this years 2020 Orange Con in Pasadena ......such a great looking build......very well done......Congrats Buddy......Hope all is well and your being safe . Quote Link to comment Share on other sites More sharing options...
curt raitz Posted April 7, 2020 Share Posted April 7, 2020 Hi Art, just likeJohn I've been trolling the forum again and happily came across this thread...excellent work buddy! Makes me want to pull that 1/20 Ferrari 126C out of the cupboard. c'ya Quote Link to comment Share on other sites More sharing options...
Mooneyzs Posted April 9, 2020 Share Posted April 9, 2020 Art.... the build is gorgeous and you are doing some awesome work on it. I can't wait to see this one in person. Quote Link to comment Share on other sites More sharing options...
Lee Yoder Posted April 9, 2020 Share Posted April 9, 2020 Very cool build! Lots of details to steal...uhh...get inspired by??! Stay safe. Later, Lee Quote Link to comment Share on other sites More sharing options...
Art Laski Posted April 16, 2020 Author Share Posted April 16, 2020 On 4/2/2020 at 5:04 PM, RiderZ said: Killer attention to detail. Nice build Thanks, Mar. Much appreciated! On 4/6/2020 at 4:19 PM, John Teresi said: Hi Art......I haven't been on the Forum for awhile ......I am just about ready to get back to building in a few days......but,I just wanted to tell you how much I enjoyed looking at this build .....you have really shown some outstanding talent on this build......and I even saw it in person at this years 2020 Orange Con in Pasadena ......such a great looking build......very well done......Congrats Buddy......Hope all is well and your being safe . Thanks, man. I've made some improvements and corrections since you've seen it. Still a few things to do, but I didn't want to not show it at Valley Con. On 4/7/2020 at 10:22 AM, curt raitz said: Hi Art, just likeJohn I've been trolling the forum again and happily came across this thread...excellent work buddy! Makes me want to pull that 1/20 Ferrari 126C out of the cupboard. c'ya Thanks, Curt. Break it out! On 4/9/2020 at 10:05 AM, Mooneyzs said: Art.... the build is gorgeous and you are doing some awesome work on it. I can't wait to see this one in person. Thanks, my friend. Hope you're keeping busy at the bench! On 4/9/2020 at 2:19 PM, Lee Yoder said: Very cool build! Lots of details to steal...uhh...get inspired by??! Stay safe. Later, Lee Thanks, Lee! I'd be honored if you stole (got inspired ) by any ideas here... lol Quote Link to comment Share on other sites More sharing options...
Codi Posted April 19, 2020 Share Posted April 19, 2020 Hi Art, like the details you've added to it. With the body on or off, its a great build. cheers, tim Quote Link to comment Share on other sites More sharing options...
mustang1989 Posted May 29, 2020 Share Posted May 29, 2020 Oh HELL yeah!!! I feel like I've missed the best movie of the year! You've really done some amazing work so far Art! WOW man! Quote Link to comment Share on other sites More sharing options...
carmad1957 Posted May 29, 2020 Share Posted May 29, 2020 Some of these builds I've had the pleasure of viewing on this forum are stunning to say the least- this being no exception to the rule! I've been at this for a few years, and there's no way I could ever match something along this line. Absolute kudos to you my friend! Terrific build you're into there? look forward to the finish! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.