kilrathy10 Posted November 10, 2020 Share Posted November 10, 2020 (edited) I have just figured out what my next project is going to be... I was checking Pinterest out, and I found this thing... A 3D model of the coolest race rig I've ever seen... And then, I found out that this truck, actually, exists... Then, there were a few more concept drawings that really peaked my interest....I saw it, and I just knew it was something I wanted to do... Not sure how much detail I'll add, but I've got to get to work and figure out how I'm going to build this thing...Definitely, looking for more pics of it... If anybody has anything different on this, please feel free to post it, here... I want to build this... Anyway... This is killer.... Time to get to work... Oh... And you know I'm going to put my own special stamp on this.... ? I'm really diggin' this interior layout... Wow!!! This one might take a while... Edited November 10, 2020 by kilrathy10 Quote Link to comment Share on other sites More sharing options...
iamsuperdan Posted November 10, 2020 Share Posted November 10, 2020 Trying to picture how one would access the engine. Quote Link to comment Share on other sites More sharing options...
Bills72sj Posted November 10, 2020 Share Posted November 10, 2020 Or turn a corner... Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted November 10, 2020 Share Posted November 10, 2020 Yeahh this will be bitchin Quote Link to comment Share on other sites More sharing options...
Scaniart Posted November 10, 2020 Share Posted November 10, 2020 Definitely going to watch this one... !!! Good luck Quote Link to comment Share on other sites More sharing options...
kilrathy10 Posted November 10, 2020 Author Share Posted November 10, 2020 16 hours ago, iamsuperdan said: Trying to picture how one would access the engine. That was the first thing I was thinking, but I guess it would be like a van or something... Access from the inside, somewhere... Like I said, I need more pictures, because I'm just as curious... ? 13 hours ago, Bills72sj said: Or turn a corner... LOL!!! That, too... The fact that this thing exists, denotes somebody can... Quote Link to comment Share on other sites More sharing options...
tbill Posted November 10, 2020 Share Posted November 10, 2020 You got this done yet? This is right up your alley JT, I see a 5 foot orange and black monster race rig? Quote Link to comment Share on other sites More sharing options...
vincen47 Posted November 10, 2020 Share Posted November 10, 2020 (edited) I’ve seen pictures of this one before, too! What a neat project it’ll be. It’s right up my alley, as well. Go for it! I was wondering about engine access too. Like a front engine Class A RV, I bet they have a removable doghouse cover inside, and much of the exterior front opens up. If I remember correctly, the Argosy has a pretty large “hood” area surrounding the grille that opens/lifts away for general servicing and maintenance. Not as convenient as a conventional, or even a tilting cabover, but possible, much like a rear engine bus. Will the service techs be happy when this rolls in? Probably not. But I’m sure they’ll charge the added labor costs for the extra time. Turning radius? Big. But, probably no worse than many of the stretched conventional trucks, or a bus. And yeah, I know, you wouldn’t see a Greyhound pulling a 53’ race trailer, but some RVs and stackers come close. Now, the color question is answered. What about the cab? A resin A&N Freightliner Argosy is hard to find (I wish they’d make another run). Do you have one, or will you substitute another cabover? Edited November 10, 2020 by vincen47 Quote Link to comment Share on other sites More sharing options...
kilrathy10 Posted November 11, 2020 Author Share Posted November 11, 2020 2 hours ago, vincen47 said: I’ve seen pictures of this one before, too! What a neat project it’ll be. It’s right up my alley, as well. Go for it! I was wondering about engine access too. Like a front engine Class A RV, I bet they have a removable doghouse cover inside, and much of the exterior front opens up. If I remember correctly, the Argosy has a pretty large “hood” area surrounding the grille that opens/lifts away for general servicing and maintenance. Not as convenient as a conventional, or even a tilting cabover, but possible, much like a rear engine bus. Will the service techs be happy when this rolls in? Probably not. But I’m sure they’ll charge the added labor costs for the extra time. Turning radius? Big. But, probably no worse than many of the stretched conventional trucks, or a bus. And yeah, I know, you wouldn’t see a Greyhound pulling a 53’ race trailer, but some RVs and stackers come close. Now, the color question is answered. What about the cab? A resin A&N Freightliner Argosy is hard to find (I wish they’d make another run). Do you have one, or will you substitute another cabover? Thanks, Bud... I've been running through my mind all the ways to attack this one, as well... I don't think the A&N Argosy will help much, anyway, as the only thing that I think they have in common are the mirrors, steps and windshield, LOL... Even the front end looks different... I'm going to have to figure a way to scratch up the cab... My main concern is the curved windshield and the curvature of the roof down the sides... I've got enough plastic... Just need to think outside the box a little bit... Quote Link to comment Share on other sites More sharing options...
kilrathy10 Posted November 11, 2020 Author Share Posted November 11, 2020 2 hours ago, tbill said: You got this done yet? This is right up your alley JT, I see a 5 foot orange and black monster race rig? Oh, yeah... As soon as I work a few things out, I'll get started... ? Quote Link to comment Share on other sites More sharing options...
Hermann Kersten Posted November 11, 2020 Share Posted November 11, 2020 That is a very nice project JT, hope you will start soon. Hermann. Quote Link to comment Share on other sites More sharing options...
extmcdriver Posted November 12, 2020 Share Posted November 12, 2020 Alright JT, we are all watching you tackle this monster. If anyone can get it done, it's you!!!! Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted November 12, 2020 Share Posted November 12, 2020 Great project! Maybe you could start with an Astro cab and modify it from there. Maybe not exact replica but a very similar one off JT signature rig. This will be cool whatever direction you go. Quote Link to comment Share on other sites More sharing options...
kilrathy10 Posted November 12, 2020 Author Share Posted November 12, 2020 (edited) 1 hour ago, DRIPTROIT 71 said: Great project! Maybe you could start with an Astro cab and modify it from there. Maybe not exact replica but a very similar one off JT signature rig. This will be cool whatever direction you go. Trust me... I've been exploring options for a donor cab for the front end of this thing... I was eyeballing that very cab... I think that it will be out of that one and a MB Actros front end.. With some modifications to the bumper, I think I could do well with it...Or even a Scania... Edited November 12, 2020 by kilrathy10 Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted November 12, 2020 Share Posted November 12, 2020 Either csb choice would make that a killer rig ! Adding the aero package will really make it stand out Quote Link to comment Share on other sites More sharing options...
Chariots of Fire Posted November 16, 2020 Share Posted November 16, 2020 Well, JT, you know how to eat an elephant, right?? One bite at a time! Got your work cut out for you, Brother!!? Quote Link to comment Share on other sites More sharing options...
DrKerry Posted November 26, 2020 Share Posted November 26, 2020 Holy wow that’s gonna be a Kool build!!! Quote Link to comment Share on other sites More sharing options...
landman Posted November 29, 2020 Share Posted November 29, 2020 I'm watching too. Quote Link to comment Share on other sites More sharing options...
Mopar - D Posted November 30, 2020 Share Posted November 30, 2020 JT you have a lot of us here just waiting for you to start this awesome project that you can do. Let me know if there’s anything I can help you with. Quote Link to comment Share on other sites More sharing options...
gatorincebu Posted December 2, 2020 Share Posted December 2, 2020 JT, You got this one dude ! I know you can handle it. After all you are a Marine . Adapt , improvise , and Overcome ! Now gitter done Marine ! Oh and I also see it in Orange and Black ! Be Well Gator Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.