stavanzer Posted November 22, 2022 Share Posted November 22, 2022 Rumor has it that this is coming out. Any Details on what will be in the Kit, and which Quarter it will be coming out? Quote Link to comment Share on other sites More sharing options...
mikemodeler Posted November 22, 2022 Share Posted November 22, 2022 (edited) The Bushwhacker Jeep is the same as this kit- different decals. Maybe they will dig out some old stuff to add to it, will be interesting to see what they do as they have done both straight re-issues and added extras in kits as of late. This kit has been re-issued many times and it hasn't changed much over the years. The original issue back in the MPC days had it with a half cab, snow plow and V-6 engine. Since then it has had the old Hurricane 4 cyl engine. Edited November 22, 2022 by mikemodeler 1 Quote Link to comment Share on other sites More sharing options...
Mike C. Posted November 22, 2022 Share Posted November 22, 2022 I put a small block Chev in mine. Quote Link to comment Share on other sites More sharing options...
CapSat 6 Posted November 23, 2022 Share Posted November 23, 2022 Which Bushwhacker? The first army-style Jeep has been offered several times recently (as the Hogan’s Heroes and Godzilla Jeeps). They more or less came with the same stuff as the Bushwhacker, except for the big tires. The 2nd style kit is basically their CJ-5 (which was basically their annual kit in the late ‘60’s and then their Daisy Duke kit), which hasn’t been out in awhile. I would rather see this one return, as they haven’t been out in awhile. Quote Link to comment Share on other sites More sharing options...
Mike C. Posted November 23, 2022 Share Posted November 23, 2022 I can remember build a variation of this early MPC Jeep model as a kid. I was obsessed with the early model early on. Quote Link to comment Share on other sites More sharing options...
keyser Posted November 23, 2022 Share Posted November 23, 2022 (edited) Early WW2/50mm mount Jeeps with flat front fenders are CJ2-A iirc. Only had 4, and had Swamp Buggy fairing, bar, grille once. Also had Surrey top in Hogans issue x2 iirc, which was in an Elvis movie too. The later CJ5 had V6 early on, later 4. Had snowplow x1, single cab x2, full up top in clear most issues. One issue had tagalong trailer Korean War issue. Had rear mount engine in an odd issue around ‘71, it had single cab too. I think it was a “cammer” though not a good one. Edited November 23, 2022 by keyser Pics Quote Link to comment Share on other sites More sharing options...
mikemodeler Posted November 23, 2022 Share Posted November 23, 2022 (edited) That Bottoms Up version would be great to see reissued, forgot about that one. I have two of these in the WIP section of my work bench, with three more in the stash. Edited November 23, 2022 by mikemodeler 1 Quote Link to comment Share on other sites More sharing options...
keyser Posted November 23, 2022 Share Posted November 23, 2022 Cool. I’m a completionist with buying all the variants that matter. Building evidently eludes my completionist. Great kit. Better with Modelhaus tires. Quote Link to comment Share on other sites More sharing options...
Hondamatic Posted November 29, 2022 Share Posted November 29, 2022 I didnt wanna pay for a "bottoms up" so I made my own from a daisy kit 3 1 Quote Link to comment Share on other sites More sharing options...
keyser Posted November 29, 2022 Share Posted November 29, 2022 Fun. Wheelie wheel on drive case funny, necessary. Driveshaft angle concerning. Sudden Death. I lol’d. 1 1 Quote Link to comment Share on other sites More sharing options...
JS23U Posted November 30, 2022 Share Posted November 30, 2022 I have a mint unbuilt Universal Dune Buggy. It is a very nice kit, with a lot of options like the mentioned snow plow, half cab and the likes. I wish Round 2 would find and include these items in future issues. 3 Quote Link to comment Share on other sites More sharing options...
Carmak Posted December 22, 2022 Share Posted December 22, 2022 Just got this guy a couple weeks ago. I assume it's the Bottoms Up kit because of the cab and decals. Did any other issue have the cab? Quote Link to comment Share on other sites More sharing options...
stavanzer Posted December 22, 2022 Author Share Posted December 22, 2022 The Universal Dune Buggy (#405-200) Has the Half Cab parts also. https://public.fotki.com/drasticplasticsmcc/mkiba-build-under-c/mpc-instructions/monster-trucks-pull/sand/mpc-universal-dune-/?view=roll#7 Quote Link to comment Share on other sites More sharing options...
Joe Handley Posted December 22, 2022 Share Posted December 22, 2022 On 11/29/2022 at 1:05 PM, keyser said: Fun. Wheelie wheel on drive case funny, necessary. Driveshaft angle concerning. Sudden Death. I lol’d. Think of it this way, at least you can't get any Death Wobble when the front axle is nowhere near the ground 1 1 Quote Link to comment Share on other sites More sharing options...
Daddyfink Posted December 22, 2022 Share Posted December 22, 2022 Hey, Round 2, since you are on a Postal kick lately...... And yes, I find it odd that it is a NASA photo! Quote Link to comment Share on other sites More sharing options...
stavanzer Posted December 22, 2022 Author Share Posted December 22, 2022 Not much (if anything) in common with other Jeeps. Notice it does not even have the Trademark Jeep Seven Slot grille. Quote Link to comment Share on other sites More sharing options...
mikemodeler Posted December 22, 2022 Share Posted December 22, 2022 3 hours ago, Daddyfink said: Hey, Round 2, since you are on a Postal kick lately...... And yes, I find it odd that it is a NASA photo! One of the resin casters in Detroit offered this as a kit a while back. Not sure if it is still available. 1 Quote Link to comment Share on other sites More sharing options...
mikemodeler Posted December 22, 2022 Share Posted December 22, 2022 On 11/23/2022 at 10:57 PM, keyser said: Early WW2/50mm mount Jeeps with flat front fenders are CJ2-A iirc. Only had 4, and had Swamp Buggy fairing, bar, grille once. Also had Surrey top in Hogans issue x2 iirc, which was in an Elvis movie too. The later CJ5 had V6 early on, later 4. Had snowplow x1, single cab x2, full up top in clear most issues. One issue had tagalong trailer Korean War issue. Had rear mount engine in an odd issue around ‘71, it had single cab too. I think it was a “cammer” though not a good one. There was one on eBay recently, I dropped out of the bidding when it hit $50, ended up selling for $110, IIRC. Quote Link to comment Share on other sites More sharing options...
Robberbaron Posted December 23, 2022 Share Posted December 23, 2022 (edited) On 12/22/2022 at 11:24 AM, Daddyfink said: Hey, Round 2, since you are on a Postal kick lately...... And yes, I find it odd that it is a NASA photo! 20 hours ago, mikemodeler said: One of the resin casters in Detroit offered this as a kit a while back. Not sure if it is still available. 20 hours ago, mikemodeler said: There was one on eBay recently, I dropped out of the bidding when it hit $50, ended up selling for $110, IIRC. OK, I know we're side tracking a little bit, but if you want a postal Jeep, there is a very nice diecast one that I found at CVS. I think the brand is Kinsmart? All lenses are clear and it has sliding doors. Steel wheels are weird-looking 4-lugs, but its easy enough to swap some parts box 5-lugs onto it. Main demerit is that it is 1:26, but I think I paid $7.99 for mine, so can't complain too much. My store only had undecorated versions (no postal markings). I got plain white, and they also had solid black and red. But Google searching shows that there are versions available with the USPS graphics. Edited December 23, 2022 by Robberbaron 1 Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted December 23, 2022 Share Posted December 23, 2022 I have the resin postal Jeep. It’s very nice full detail with the straight six. Jeff didn’t have any of the decals left so I will grab a few postal Pintos. And to get back on track.. I bought a junker bag with remnants of several Jeeps at a show. I managed to pull two models out of it. Green one has a V8 and became 2WD. I didn’t have a hood, glass or tailgate so second one became a junker. Okay, two and a half Jeeps from the bag! And the rest of that one… 1 Quote Link to comment Share on other sites More sharing options...
Daddyfink Posted December 24, 2022 Share Posted December 24, 2022 On 12/23/2022 at 9:27 AM, Robberbaron said: OK, I know we're side tracking a little bit, but if you want a postal Jeep, there is a very nice diecast one that I found at CVS. I think the brand is Kinsmart? All lenses are clear and it has sliding doors. Steel wheels are weird-looking 4-lugs, but its easy enough to swap some parts box 5-lugs onto it. Main demerit is that it is 1:26, but I think I paid $7.99 for mine, so can't complain too much. My store only had undecorated versions (no postal markings). I got plain white, and they also had solid black and red. But Google searching shows that there are versions available with the USPS graphics. Oh wow! I have not seen that at CVS. Looks like I will have to hunt around for it a bit. Thanks for the info! Quote Link to comment Share on other sites More sharing options...
Plowboy Posted December 25, 2022 Share Posted December 25, 2022 With what Round2 has been doing with old kits lately, I'd like to see them return the Commando to the Jeepster. All they would have to do is the body and interior panels. Big bonus for the full hard top. Quote Link to comment Share on other sites More sharing options...
mikemodeler Posted December 25, 2022 Share Posted December 25, 2022 21 hours ago, Plowboy said: With what Round2 has been doing with old kits lately, I'd like to see them return the Commando to the Jeepster. All they would have to do is the body and interior panels. Big bonus for the full hard top. It's a shame they didn't do that. Olson Bros. did do the early conversion pieces you mentioned but have discontinued them. I did get one of their bodies, need to get it done. Quote Link to comment Share on other sites More sharing options...
GLMFAA1 Posted December 26, 2022 Share Posted December 26, 2022 On 12/22/2022 at 12:24 PM, Daddyfink said: Hey, Round 2, since you are on a Postal kick lately...... And yes, I find it odd that it is a NASA photo! Wasn't that an early prototype of the space shuttle? greg 1 1 Quote Link to comment Share on other sites More sharing options...
Plowboy Posted December 27, 2022 Share Posted December 27, 2022 On 12/25/2022 at 6:49 PM, mikemodeler said: It's a shame they didn't do that. Olson Bros. did do the early conversion pieces you mentioned but have discontinued them. I did get one of their bodies, need to get it done. I looked at those. But, by the time you buy the kit and the trans kit, you could almost buy an original. IIRC, the trans kit didn’t come with the splash guard or rounded bumpers and the full top was a separate price. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.