'70 Grande Posted February 7, 2016 Share Posted February 7, 2016 (edited) I sure would like to get this upcoming reissued kit and build it as a Super Coupe, but I think that would turn into a fairly-major conversion project. From what I can tell, I'd need to replace the front bumper/grill/headlights piece for certain, and probably many of the interior pieces. Weren't the 1:1 Super Coupes only built in the 1978 model-year? Any Mopar experts out there that provide some insights as to what'd need to be done to this upcoming reissue for conversion into a decent Super Coupe replica model? Edited February 7, 2016 by '70 Grande Quote Link to comment Share on other sites More sharing options...
stavanzer Posted February 7, 2016 Share Posted February 7, 2016 Isn't that what Super Chicken drives? Quote Link to comment Share on other sites More sharing options...
unclescott58 Posted February 7, 2016 Share Posted February 7, 2016 Super Chicken drives a Super Coop. Quote Link to comment Share on other sites More sharing options...
stavanzer Posted February 7, 2016 Share Posted February 7, 2016 It's been years since I watched the show. KTLA was where I always saw it. Tom Slick and George of the Jungle were my favorites, however.Although, Super Chicken has one line that I remember to this day.... "You know the job was dangerous when you took it, Fred!" Quote Link to comment Share on other sites More sharing options...
Mark Brown Posted February 8, 2016 Share Posted February 8, 2016 Interesting discussion. I've got a Volare promo that I've been saving for years. I hope a new (or repopped) kit sees the light of day so I don't have to keep hoarding my promo (and so I don't have to deal with its dark blue plastic).One of the obstacles to consider on these, if you are building one stock, is the front suspension. Chrysler used a transverse torsion bar front end on these cars, as opposed to the longitudinal torsion bars you find on almost all Mopars before these came along. They were actually used as a street rod front end swap before rodders discovered all the benefits of the Mustang II front end. I'll be interested in seeing if MPC actually replicates the front suspension or just uses the same chassis as on the earlier A-body kits.I owned a '79 Aspen back in the early '90s and it was really a pretty decent transportation tool, if slow with the 225-inch six. I bought it with the notion of swapping K-members and putting a 440 in it, but I got bitten by the Mustang bug around that time and that was the end of what was only my second ever Mopar (the first being a '64 Barracuda). Quote Link to comment Share on other sites More sharing options...
1972coronet Posted February 8, 2016 Author Share Posted February 8, 2016 One of the obstacles to consider on these, if you are building one stock, is the front suspension. Chrysler used a transverse torsion bar front end on these cars, as opposed to the longitudinal torsion bars you find on almost all Mopars before these came along. Rest assured that the transverse-mount torsion bars are there , same chassis from 1976 (as a 1977) through the 1980 (last year for the F-bodies) . I have a '77 Volare annual (MPC never did a '76 model) and that was the first thing I checked ! Another bonus of the MPC F-body kits : Torqueflite trans , correct air cleaner , and underhood details ! Quote Link to comment Share on other sites More sharing options...
pack rat Posted February 8, 2016 Share Posted February 8, 2016 I'll be interested in seeing if MPC actually replicates the front suspension or just uses the same chassis as on the earlier A-body kits. The (simplified) chassis will be re-issued just as MPC originally issued it in the 70's/80's Quote Link to comment Share on other sites More sharing options...
stavanzer Posted February 8, 2016 Share Posted February 8, 2016 Which is just barely adequate , at best, but it WILL do the job.I am satisfied, if not overjoyed by it. Just happy to have the kit at all, in this case. Quote Link to comment Share on other sites More sharing options...
drodg Posted February 9, 2016 Share Posted February 9, 2016 I would assume MPC/AMT are not going to do decals that would be correct for an 80 Roadrunner. It would be nice if Keith Marks might put them together. I checked on his sight and it doesn't look like he is planning on it. Quote Link to comment Share on other sites More sharing options...
Casey Posted April 10, 2016 Share Posted April 10, 2016 Quote Link to comment Share on other sites More sharing options...
gasman Posted April 10, 2016 Share Posted April 10, 2016 Molded in white is great too see. I have an original (and only) 1979 issue that's molded in Black. white makes it a lot easier too paint. Quote Link to comment Share on other sites More sharing options...
Mr mopar Posted April 10, 2016 Share Posted April 10, 2016 Now that's cool you can make the Roadrunner sweet! Quote Link to comment Share on other sites More sharing options...
1972coronet Posted April 10, 2016 Author Share Posted April 10, 2016 Molded in white is great too see. I have an original (and only) 1979 issue that's molded in Black. white makes it a lot easier too paint.I , too , have the c.1979 issue . Had it when the kit was new ,but it "suffered" at the hands of a 10 year old's "skills" . I bought another one , factory-sealed , from eBay a few years back. My thinking was , "This will never be reissued ! " . I'm glad that it's seeing the light of day after 36 years ( !! ) . I will say that the advantage of the original being moulded in black is that the air cleaner assembly has a default proper sheen to it ! At least this go'round the tyres will be much better than the original's 2-piece plastic pieces of cow dung ! Quote Link to comment Share on other sites More sharing options...
unclescott58 Posted April 10, 2016 Share Posted April 10, 2016 As I've stated before, I love Volares. So this one is high on my list of must haves. Quote Link to comment Share on other sites More sharing options...
disabled modeler Posted April 10, 2016 Share Posted April 10, 2016 Interesting discussion. I've got a Volare promo that I've been saving for years. I hope a new (or repopped) kit sees the light of day so I don't have to keep hoarding my promo (and so I don't have to deal with its dark blue plastic).One of the obstacles to consider on these, if you are building one stock, is the front suspension. Chrysler used a transverse torsion bar front end on these cars, as opposed to the longitudinal torsion bars you find on almost all Mopars before these came along. They were actually used as a street rod front end swap before rodders discovered all the benefits of the Mustang II front end. I'll be interested in seeing if MPC actually replicates the front suspension or just uses the same chassis as on the earlier A-body kits.I owned a '79 Aspen back in the early '90s and it was really a pretty decent transportation tool, if slow with the 225-inch six. I bought it with the notion of swapping K-members and putting a 440 in it, but I got bitten by the Mustang bug around that time and that was the end of what was only my second ever Mopar (the first being a '64 Barracuda).Mark....What does your promo look like...? Quote Link to comment Share on other sites More sharing options...
Mark Brown Posted April 10, 2016 Share Posted April 10, 2016 It's just the same as this one on eBayhttp://www.ebay.com/itm/MPC-1-25-SCALE-1978-PLYMOUTH-VOLARE-DEALER-PROMO-STARLITE-BLUE/111960297007?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D35624%26meid%3D914563154a5243118f1bcee11d5223ee%26pid%3D100011%26rk%3D4%26rkt%3D10%26sd%3D361522137496 Quote Link to comment Share on other sites More sharing options...
disabled modeler Posted April 11, 2016 Share Posted April 11, 2016 (edited) It's just the same as this one on eBayhttp://www.ebay.com/itm/MPC-1-25-SCALE-1978-PLYMOUTH-VOLARE-DEALER-PROMO-STARLITE-BLUE/111960297007?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D35624%26meid%3D914563154a5243118f1bcee11d5223ee%26pid%3D100011%26rk%3D4%26rkt%3D10%26sd%3D361522137496 Mark... That is cool...I like it. If you decide not to do anything with it or..? PM me. Edited April 11, 2016 by disabled modeler Quote Link to comment Share on other sites More sharing options...
Mark Brown Posted April 11, 2016 Share Posted April 11, 2016 Mark... That is cool...I like it. If you decide not to do anything with it or..? PM me.As is usually the case, I paid a bunch for it, and by the time I get around to doing anything with it, the kit will have been reissued. I used to tell people, if there's an OOP kit you want reissued, just let me know and I'll buy an old on on eBay to big bucks, and the original will get reissued within months! Quote Link to comment Share on other sites More sharing options...
drodg Posted April 11, 2016 Share Posted April 11, 2016 I wonder if the Roadrunner decals are the correct 1980 Roadrunner decals? It will be interesting to see. Quote Link to comment Share on other sites More sharing options...
disabled modeler Posted April 12, 2016 Share Posted April 12, 2016 As is usually the case, I paid a bunch for it, and by the time I get around to doing anything with it, the kit will have been reissued. I used to tell people, if there's an OOP kit you want reissued, just let me know and I'll buy an old on on eBay to big bucks, and the original will get reissued within months!Mark...Id love to see yours get re-issued...then I could have another family owned one for the collection. Quote Link to comment Share on other sites More sharing options...
drodg Posted April 12, 2016 Share Posted April 12, 2016 (edited) It does say Roadrunner Markings on the decal sheet. I don't think the orginal decals had Roadrunner markings. Now if we can just come up with correct 1980 Volare wheels. Edited April 12, 2016 by drodg Quote Link to comment Share on other sites More sharing options...
Casey Posted April 12, 2016 Share Posted April 12, 2016 The '80 Road Runner had very minimal "road runner" stickers and some stripes at the wheel arches, rear spoiler, etc., so don't expect too much: Quote Link to comment Share on other sites More sharing options...
unclescott58 Posted April 12, 2016 Share Posted April 12, 2016 I like how clean the above Road Runner looks, Casey. I hope they offer the above decals in different colors. So I can choose the color I want to paint the car. Quote Link to comment Share on other sites More sharing options...
Can-Con Posted April 13, 2016 Share Posted April 13, 2016 Looks like a set of 8 spoke wagon wheels from a MPC Jeep CJ kit with the spokes painted would get you pretty close to the stock '80 wheels.The centers kinda look like the "volcano" centers from the AMT Gremlin kit wheels. Quote Link to comment Share on other sites More sharing options...
1972coronet Posted April 13, 2016 Author Share Posted April 13, 2016 Maybe Missing Link will offer those (obscure) wheels eventually ? I wonder if there were other options available for the '80 Road Runner ... Even then , I'll probably stick with the (incorrect) Rallye Wheels . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.