Jump to content
Model Cars Magazine Forum

‘67 442


BeakDoc

Recommended Posts

Built from the Lindberg kit. Paint is Tamiya Light Blue Pearl over white primer with Testors Ultra Gloss clear. Interior is the same paint over white primer and gray primer on the insets of the seats. Wheels and tire are from the Revell ‘56 Del Ray kit. Disc brakes are Pegasus. Not my best effort for sure. Very fiddly kit that tried my patience more than I’d like to admit. As always, comment, questions and suggestions are welcome.

83B81345-642A-42AF-A405-1800FA04A62F.jpeg

0BA0DCD6-79FB-47F3-AA8F-37849944F626.jpeg

71F5E335-DB3B-4A1A-8D48-F97BA2985611.jpeg

D26851A3-C2C4-44CC-A4F2-08910610F447.jpeg

D42E6748-167D-40C2-B477-84A72EEB4933.jpeg

CA95ED81-B249-491F-8502-EAA052B46AE6.jpeg

67C0DD28-F786-47A4-8BEF-7C51C95C4F2C.jpeg

CE5B353B-F889-4A2F-BC9E-F612E8BB89F6.jpeg

C9C7C720-98D2-48AD-87B9-C18EE4C1E6E4.jpeg

34774E4E-1F19-49BD-810C-5B62769BE3DA.jpeg

59E88C9E-8674-4C41-88AE-62E2F1069C51.jpeg

Link to comment
Share on other sites

20 hours ago, BeakDoc said:

Built from the Lindberg kit. Paint is Tamiya Light Blue Pearl over white primer with Testors Ultra Gloss clear.  Very fiddly kit that tried my patience more than I’d like to admit. As always, comment, questions and suggestions are welcome.

 

Looks like you overcame all the obstacles and ended up with a great build.  Just out of curiosity, what issues were giving you fits?

Link to comment
Share on other sites

20 hours ago, Safire6 said:

Nice! I really like that color. Engine details look really good...where did you get the hose clamps from?

 

 

I ordered them from Hobbylinc.com.

56 minutes ago, Monty said:

Looks like you overcame all the obstacles and ended up with a great build.  Just out of curiosity, what issues were giving you fits?

The biggest issue was self-imposed as I messed up the paint.....twice. As for the kit itself; the decals would not stick, anywhere, to any surface. As soon as the microset dried they’d fall right off. I ended up using a dab of Elmer’s clear paste to hold them in place. The two-piece vent window/frames were anxiety inducing because the tabs were microscopic and I dreaded the thought of mucking up the paint job with glue. Also, the angle did not match that of the A-pillar. The front bumper/grill/roll pan is all one piece on the chrome tree. (I found that odd since it seemed Lindberg went out of their way to give me a headache with so many other small parts and sub-assemblies.) So that required extra paint prep that I feel was unnecessary. The front assembly was also the worst fitting part of the entire kit. I did a lot of sanding, trimming and shaving to get it mated up properly. The forced air intake hoses had to be heated with a lighter and reshaped to follow the contours properly so that the hood would close completely. I know it’s all part of modeling. No kit is perfect, and frankly, I like a good challenge. Everywhere else this kit went together like a dream, but the bad spots were so shockingly bad. 

Thank you to you and everyone the compliments and for looking.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...