peteski Posted August 22, 2021 Share Posted August 22, 2021 On 8/11/2021 at 1:23 AM, alan barton said: Come and live in Australia where kits haven't been UNDER $60 for the last three years or so. Well AU$ is only worth abut 0.71 US$, so AU$60 is $42 American. Still a bit high, but not as bad as it appears without the conversion. Quote Link to comment Share on other sites More sharing options...
stavanzer Posted September 30, 2021 Share Posted September 30, 2021 Here it is almost October. Are there any updates on this kit? Quote Link to comment Share on other sites More sharing options...
the other Mike S. Posted October 1, 2021 Share Posted October 1, 2021 On 9/30/2021 at 8:43 AM, alexis said: Here it is almost October. Are there any updates on this kit? Relax…it’s probably on one of those freighters coming in from China. They’re all stacked up right now in the ocean off Long Beach. Quote Link to comment Share on other sites More sharing options...
slusher Posted October 5, 2021 Share Posted October 5, 2021 This kit needs 40% off hobby lobby coupon.. Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted October 5, 2021 Share Posted October 5, 2021 On 10/1/2021 at 2:13 PM, the other Mike S. said: Relax…it’s probably on one of those freighters coming in from China. They’re all stacked up right now in the ocean off Long Beach. And I read that a container from China was in the $4000 range and current charges are $10,000 or more.. ya know who is going to be paying for this! And R2 said the next release would be a stock ambulance! Quote Link to comment Share on other sites More sharing options...
thatz4u Posted October 5, 2021 Share Posted October 5, 2021 On 10/1/2021 at 2:13 PM, the other Mike S. said: Relax…it’s probably on one of those freighters coming in from China. They’re all stacked up right now in the ocean off Long Beach. how they gonna get them past the oil spill??? Quote Link to comment Share on other sites More sharing options...
stavanzer Posted October 6, 2021 Share Posted October 6, 2021 The Oil Spill does not affect the Port of L.A. Rail Gridlock and Lack of Truck Drivers does. Quote Link to comment Share on other sites More sharing options...
A modeler named mike Posted November 21, 2021 Share Posted November 21, 2021 On 8/4/2021 at 3:04 PM, Luc Janssens said: Is it the ex Polar Lights or the Amt/Ertl kit? BTW The windows are damped, are they smoking pot inide?! Smoked up Windows? Maybe Cheech and Chong have turned to being lifeguards at the local beach..😉 I was pretty excited when I first ran across the announcement of this kit but that initial luster has faded...but I'll probably twist my own arm and pick one up anyway. I'd love to see a reissued version of the aurora meat wagon or '39 La Salle hearse model kit in a one piece bodies. Wishful thinking? Quote Link to comment Share on other sites More sharing options...
A modeler named mike Posted November 21, 2021 Share Posted November 21, 2021 On 8/4/2021 at 3:04 PM, Luc Janssens said: Is it the ex Polar Lights or the Amt/Ertl kit? BTW The windows are damped, are they smoking pot inide?! Smoked up Windows? Maybe Cheech and Chong have turned to being lifeguards at the local beach..😉 I was pretty excited when I first ran across the announcement of this kit but that initial luster has faded...but I'll probably twist my own arm and pick one up anyway. I'd love to see a reissued version of the aurora meat wagon or '39 La Salle hearse model kit in a one piece bodies. Wishful thinking? Quote Link to comment Share on other sites More sharing options...
A modeler named mike Posted November 21, 2021 Share Posted November 21, 2021 7 minutes ago, A modeler named mike said: Smoked up Windows? Maybe Cheech and Chong have turned to being lifeguards at the local beach..😉 I was pretty excited when I first ran across the announcement of this kit but that initial luster has faded...but I'll probably twist my own arm and pick one up anyway. I'd love to see a reissued version of the aurora meat wagon or '39 La Salle hearse model kit in a one piece bodies. Wishful thinking? Not sure what the heck is going on but some how I've repeated the same thing over and over after the site tells me to verify myself? Sorry guys! Quote Link to comment Share on other sites More sharing options...
Xingu Posted November 21, 2021 Share Posted November 21, 2021 I cleaned it up. Quote Link to comment Share on other sites More sharing options...
stavanzer Posted November 22, 2021 Share Posted November 22, 2021 I am wondering if there will be a set of 'Straight' Ambulance decals in this kit, in addition to the Surf Shark markings, or if those will wait for a different version? Quote Link to comment Share on other sites More sharing options...
Brian Austin Posted November 27, 2021 Share Posted November 27, 2021 The Polar Lights version had smoked (dark) side and rear windows. It has been my impression that it is the old AMT version that's being reissued. I think it has been stated that a straight ambulance version will be issued later. I'd be curious to see what the present reissue will look like. Quote Link to comment Share on other sites More sharing options...
Casey Posted December 13, 2021 Author Share Posted December 13, 2021 Quote Link to comment Share on other sites More sharing options...
stavanzer Posted December 14, 2021 Share Posted December 14, 2021 Boy! Decontent the kit much? Decals look good. Quote Link to comment Share on other sites More sharing options...
Rob Hall Posted December 14, 2021 Share Posted December 14, 2021 I wonder if they have cleaned up the body and filled in the various holes for mounting the Ghostbusters gear. iIRC, they were cast open… Quote Link to comment Share on other sites More sharing options...
Casey Posted December 14, 2021 Author Share Posted December 14, 2021 7 minutes ago, Rob Hall said: I wonder if they have cleaned up the body and filled in the various holes for mounting the Ghostbusters gear. iIRC, they were cast open… I think that's why Round2 tooled up the roof-mounted wedge-shaped lights, to effectively fill the two holes in each corner of the roof. Quote Link to comment Share on other sites More sharing options...
MPi-KM Posted December 14, 2021 Share Posted December 14, 2021 I'm going to get one just for those surfboard decals. Quote Link to comment Share on other sites More sharing options...
Brian Austin Posted December 14, 2021 Share Posted December 14, 2021 I've been wondering about the interior bucket, with "Ecto-equipment" detail molded in. Quote Link to comment Share on other sites More sharing options...
stavanzer Posted December 14, 2021 Share Posted December 14, 2021 After seeing the box bottom, I'll be getting the decals from eBay, when somebody parts out the kit. Quote Link to comment Share on other sites More sharing options...
Rob Hall Posted December 14, 2021 Share Posted December 14, 2021 (edited) 11 hours ago, Casey said: I think that's why Round2 tooled up the roof-mounted wedge-shaped lights, to effectively fill the two holes in each corner of the roof. Maybe, the holes are towards the middle of the roof, though...and there are many other holes and tabs on the roof...the surf rack might use the same tabs that the ECTO-1A gear rack did. There are holes and a mounting plate on the left rear quarter that would need smoothed and filled in also. Edited December 14, 2021 by Rob Hall Quote Link to comment Share on other sites More sharing options...
Casey Posted December 14, 2021 Author Share Posted December 14, 2021 (edited) 5 hours ago, Rob Hall said: There are holes and a mounting plate on the left rear quarter that would need smoothed and filled in also. Maybe that's why the surfboard is positioned like so?: I've never had the ECTO-1 kit in hand to look over, so after a quick Goolging, found this, which shows the raised protrusions on the roof: *edit* better image per link below: Maybe Mike W or Steve G can share what was done exactly. Edited December 14, 2021 by Casey Quote Link to comment Share on other sites More sharing options...
keyser Posted December 14, 2021 Share Posted December 14, 2021 (edited) PL has inside lower fins so can’t see join iirc. OG AMT has separate complete fins.. Also AMT has diamond plate step bumper. Forget which issue this is but moon caps seem to mean AMT. Thanks Rob edited becuz I’m old AMT OG https://www.wettringer-modellbauforum.de/forum/index.php?page=Thread&threadID=53191 Edited December 14, 2021 by keyser Screwed up Quote Link to comment Share on other sites More sharing options...
Rob Hall Posted December 14, 2021 Share Posted December 14, 2021 (edited) 22 minutes ago, keyser said: Finless one is PL. OG AMT is finned. forget which issue this is but moon caps seem to mean AMT. The one I have has separate fins and moon caps (one piece wheels), and says AMT on the box. I have the original AMT issue in storage, so can't compare them...never had the PL one. Edited December 14, 2021 by Rob Hall Quote Link to comment Share on other sites More sharing options...
keyser Posted December 14, 2021 Share Posted December 14, 2021 Just now, Rob Hall said: The one I have has separate fins and moon caps (one piece wheels), and says AMT on the box. Yeah. PL has partial fins inside lower section. Screwed up. Thx Rob. PL has real caddy caps and w/w. AMT moons and b/w way back anyway Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.