MikeMc

That is KILLER Billy......love the low n phat look

Galaxie Ltd.....out of production but very available. Here follow this link

Where are you at.......

So what else is new..........

Did the hardest part of this for me.. Making a window mount "a/c".....I used a piece of tube, a piece of 040 sheet, small length of channel, an old fan clutch ,and lotsa tenax : now that this is built I'm gonna putty and prime it so I can finally shoot some color!!!!!

get it full of fingerprints and dust, then scratches when I remove the dusty fingerprints....... just tellin the truth!!!!

I thought you Apple guys don't have those kind of issues

Visualize Harry....23" Pegasus Phat Daddies with drilled chrome discs behind..................

Great Color and Wheels..gonna look great!!

Even in 1:1

Try the flat silicone O rings from some large R/C truck shock valves come to mind first. if you have an industrial machine repair company nearby they might have some, same part for tool oiling connectors.... not sure that grainger will stock the small ones.....good luck

The 41 willys street rod has a set that should work...

Call Golden Bell direct (303/296/1600) or (877/463/3127) sweet talk Sherri or any of the crew .........DO NOT MENTION HARRY!!!

I am in awe...keep it coming!!!

I agree with Bill...its a lot of work..looking great so far...if it doesn't work...you can make a killer kustum sled....

The body work started out with a shave...door locks and gas filler neck were removed then holes were filled in with sprue. The detail trim at the bodyline and on the skirts and rear fenders was cut and installed. The bumper mounts were removed from the frame and remounted to the front and rear bumper pans, the duals should be right below the rear bumper..............more to come!!!!

Got lots more done...doesn't look like a lot....BUT the body work is done, just a final sand and scuff then BC26 white basecoat. Floor pan is done along with the firewall. I ended up with two slots in the pan for the frame to sit into, this made a need for clearance around the pumpkin. bottom edge of the firewall was shortened also. Both were cut and then filled in with sheet styrene. As I mentioned earlier the front of the motor mount was cutdown along with the tranny mount, of course this meant I had to section the radiator.....ahhhh the lowlife!!!

I have stripped future over lacquer using windex with no problems paintwise. I have not tried it on a decaled surface,I suspect evil things will occur with the decal...Try the spoon routine with a decal or two...

My 25th....after dinner now....still haven't seen any silver.........

Well Done Bruce!!!! Looking totally killer

Names would make it sporting.......

If you build customs....you can shave those locks and handles away!!!

I do it Bobs way...and it does make my paint jobs much better...I'm gonna let Bob experiment and then use his proven technique!!

C'mon Harry....the real truth is this was built for the CIA....those tubes could hold rocket packs for quick get a ways!!!!

I'll believe it when somebody gets banned...........not holding my breath