Pierre Rivard

Thanks Daniel. I'm attempting a bit of engine detailing here. I don't know how you do that stuff...everything is so small!

Thanks Mark. I'm out of my comfort zone with this one so I'm trying to plan my steps a bit more. It's a chassis and engine design like no other I have seen before.

Accurate (?) Miniature Grand Sport. It was intense. I have another one to build but have not yet found the courage to take it on.

That's interesting, I've had similar issues twice. Does the vinyl just comes as a sheet and you cut circles in. Curious to learn more about this.

I found stainless steel meshing on Amazon, 2 rolls of 12x45 inches for about $20 (US). It was advertised as 40 mesh but seems more like 20 to me. The small piece at the front I made from material left from a Fernando Pinto kit and I measured it at 40 mesh per inch. The stuff on Amazon is also offered in "80" and "120" mesh, so I think I'll get some of it and be set for life.

Engine elements pre assembled for test fittings (lots of these needed for this build) have been painted and I am now starting on the slow process of adding some detailing (water, oil and fuel lines). Water feed to rad, I added some tape (painted black) and wrapped wire to simulate hose & clamp elements Fuel distribution unit fabricated using styrene and 1,19mm brass tubes Distributor to collector ignition wires have been added. Not very convincing but it will be mostly hidden low into the engine bay.

Some work has been happening (slowly) and I did not take pictures so a bit of catching up required Chassis has been assembled and painted Interior has been completed. Seat patterns are from Indycal sheet. I added Instrument dial bezels (wrapped thin wire) and a turned metal shifter, then a bit of weathering to show some race use.

A bit wet sanding the primer but I never touch the color coat. Acrylic clear over the color which has received Tamiya fine and finish compound rub before decals, and then Quick Shine floor polish to seal the decals. Quick Shine is not super shiny but I find it a good match for period race cars like this one. If you can't spray your models then brush painting can be done as an alternative but it takes more time with all these steps... but this is a pastime right?

I agree, multiple coats with thinned paint works best for brush painting, especially large surfaces. I brush paint everything, even the body. I've tried to make it work with Tamiya. It works good on small parts but on large surfaces it is mission impossible because each layer bites into the previous one causing issues. Tamiya is an acrylic but has a co-solvent in. I suggest a true 100% water based acrylic for brush painting large surfaces. My favorite is Vallejo. This model is entirely brush painted. Takes a while to develop the technique but it is doable.

Wow Harald, what a wonderful diorama and an opportunity to revisit an incredible period in racing technology and innovation. As always your figurines add so much realism into the diorama. I am most impressed with the brick road textures looking so much like the real track.

And thank you for following and commenting on my build. Thank you Andy. Support much appreciated.

Nice build Gary. You got it to the starting line just in time!

Beautiful work David. The leather and wood finishes look very realistic. This project is looking mighty good!

Looks very good. 1/43 figurines are remarquable.

Hi Mark, I agree that mixing the paint allows possibilities but with some colors a bit of a trade off is required to allow a successful brush painted finish. For example some yellow hues are so pure that some mixing must be done to achieve improved hiding while paying a price for color accuracy.

Thank you Dan, I'm happy this one is finished. Not an easy transformation. The secret is not in the painting but in the formulation of a color that is paintable. Yellows and whites need some tuning to be workable. If you like the yellow hue on this car then I've done my job well.

?

The shifter IS a model by itself. Gorgeous stuff. What's wonderful about creating a scale model of a Birdcage Maser is that the design allows to see so much of the detailing even with the body over it. This is all so inspiring.

Thank you all for the feedback. Jason will be starting on prototypes. I have also asked to produce two style of spinners for these. It should cover most needs. Sorry about the french language on the slide, which is part of my exchange of communication with Jason.

Looks like you'll make it to practice. How may entrants do you have on the grid and how many more might make it?

I agree. The idea is a multi use outside laced Borrani style wheel (just change the spinners). The data I provided Jason with included some Ferrari and Maserati wheels so all of it got gelled into this design. There were actually multiple iterations of out-laced Borranis out there, all similar but not quite identical. Focus was on getting the spokes properly oriented and getting the right look on the offset of the first row (not to flat or neither too coned out) Waiting to see if others have input to provide then I will ask Jason to proceed with prototypes.

Jason Hupin (Jack Modeling) has taken on the design of out-laced wheels for this project and here is his latest design iteration. I think we are there but please comment if you think we have missed something. The idea is to design and print a wheel that would also be a good fit for other cars (Maserati, Ferrari etc) that used out-laced Borranis. First pic is for comparison/reference, then the design from Jason. Next step will be printing prototypes.

Wow Shawn. How hou have used the AMT Ferrari SWB and integrated it into the diorama is masterful as all the good parts of the body are there to see and the not so good parts (the butt!) are smartly covered. The fabrication of the diorama, the creative use of materials, the finishes, textures and weathering would indicate expertise and experience... yet this is your first weathered car and diorama? Blown away!

Beautiful Mark, as all your builds are. It's great to see well researched and fabricated replicas at 1/43 scale, not too many to marvel at in a world of 1/24 and 1/12 scale. Keep them coming sir, they are wonderful!

Thank you Larry, support much appreciated. Thanks Russ. Difficult transformation but I persevered and happy that I did. I'd love to build a MFH but have yet to find the courage to pull the trigger on one of these intimidating kits. These days I am more into finding old simple kits and trying to add a bit of detail and realism to them. Just pulled the trigger on an old (sealed) Lindberg Mercedes SSK...