GMP440

I would add a couple more to Junkman's list. MPC 1968 Coronet R/T stock or Fever bedding car 1969 Coroner R/T stock or Superhemi drag car

Wanted to ask how the kit builds up. What's the opinion of those that have built the kit? Thanks.

I've used it too. Works very well.

I could see them doing a 68' Dodge Coronet R/T both in stock form and as a #99 Paul Goldsmith nascar version.

My predictions for 2016 would be: Round 2: 1968 Dodge Coronet R/T 1980 Plymouth Volare 1969 Barracuda Hurst Hemi Under Glass

There is Felix Hobbies in North Miami. I believe it's Dixie Highway and 135th st. There is another hobby shop in Kendall by the Falls Shopping Center Hobby Lobby in Davie, Florida. University Drive/State Road 84. Tri State Hobbies in Tamarac, Florida. Mc Nab Rd and Unuversity Drive.

Testing post

Maybe the resin caster can check if in fact the Lindberg Crown Vic chassis will work. I would want to know that for sure.

The 92-97 Corwn Vic chassis is identical to the 79-91 Crown Vic chassis. Using the Lindberg 92-97 kit will work. Not sure if the 98-current Crown Vic chassis is the same. Anyone here know? If you go on the website Crownvic.net. That message board has members that know these cars well.

I would be interested in the 90-91 Crown Vic. Will it have the correct 90-91 interior and dash guages? Would want to see a casting/test shot first. There was a resin company a few years ago that cast a 90-91 Crown Vic. The roof line was off and roof height was incorrect.

Here are my 5 subjects 1. MPC 1968 Dodge Coronet R/T Hardtop 2. MPC 1968 Dodge Coronet R/T Feverbee 3. MPC 1969 Dodge Coronet R/T Hardtop 4. AMT 1964 Pontiac Grand Prix 5 MPC 76-80 Plymouth Volare Roadrunner

Was on Model Round Up's site and read the Tee Vee Dune Buggy will be part of their model line up some time in the future. Has anyone built that back in the day? Anyone have pics of one finished?

Where did the announcement about the release of these 1/8 bikes come from? Just checked Round 2's site , but did not find anything.

So the Buffalo, NY Hobby Lobby's have them? So, if that's the case; hopefully they will soon show up at the Hobby Lobby down here.

Down here in South Florida, I have not seen any at Hobby Lobby yet. The kit has been out for almost 3 months. Anyone find any Cyclones at their local Hobby Lobby? All I see at Hobby Lobby are the Pepsi Chevelles.

Has anyone seen the Donnie Allison Cyclones at Hobby Lobby yet? At the one I go to, there is only the Pepsi Chevelle.

Since Hobby Lobby has the Nascar Laguna, hopefully we'll see the Cyclone there as well.

Would love to see a reissue of the MPC 68 Coronet R/T. We almost got one a few years ago.

I beleive we will see the 70 Charger R/T come out. That would be a big seller. I hope we will also see the 68 Coronet R/T come out too. I don't know if Round 2 or Moebius realize that if these two get produced, the kit sales would be tremendous for both,

Wanted to ask the resin casters how you are resin casting steering wheels. I have been resin casting small parts. The castings come out nice. But, when I cast a steering wheel the steering wheel remains bendable after the resin has cured for a while. However, other parts that I cast ; once cured fully, are nice and hard. It's just the steering wheels that remain a little soft. Those that cast resin parts , how do you get a more rigid casting of a steering wheel?

Outstanding. Body looks great. I would do another one, but instead ; try to make the more correct front grill and nose that was on the 79-86 Capri's.

Is that kit still available?

Maybe in 2015 we will finally see an all new release of the 68' Dodge Coronet R/T.

Wanted to say thanks to all who responded to this topic I posted. I never expected this much of a response. This became a very interesting topic.

Here is my wish list: 1968 Dodge Coronet R/T 1969 Dodge Coronet R/T 67-69 AMC Rebel 78-87 Pontiac Grand Prix